Analysis of information sources in references of the Wikipedia article "Asclepias speciosa" in English language version.
Any of the standard seed propagation methods (Landis et al., 1999) are effective with milkweed. Direct sowing of non-stratified seeds during the fall followed by exposure to ambient winter conditions can be effective, but the seeds must be mulched and protected. Cover sown seeds with a thin mulch; research has found that common milkweed seeds germinated better when planted 1 to 2 cm (0.4 to 0.8 in.) deep than when at the soil surface (Jeffery and Robison, 1971).
Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Many sources of milkweed seeds require stratification (cold, moist treatment) before sowing. In a review of stratification requirements for common milkweed, recommendations varied from as short as 7 days to as long as 11 months at 5°C (41°F) (Luna and Dumroese, 2013). Butterfly milkweed (A. tuberosa) germination increased from 29 to 48 to 62% as stratification duration increased from 0 to 30 to 60 days, respectively (Bir, 1986). Our informal natural stratification trial with showy (milkweed) and narrow leaf milkweed (A. fascicularis) in southern Oregon revealed that seeds began to germinate after 15 weeks in stratification (Fig. 3A).
Seed may be stubborn to germinate and may need a period of cold treatment..
Any of the standard seed propagation methods (Landis et al., 1999) are effective with milkweed. Direct sowing of non-stratified seeds during the fall followed by exposure to ambient winter conditions can be effective, but the seeds must be mulched and protected. Cover sown seeds with a thin mulch; research has found that common milkweed seeds germinated better when planted 1 to 2 cm (0.4 to 0.8 in.) deep than when at the soil surface (Jeffery and Robison, 1971).
Many sources of milkweed seeds require stratification (cold, moist treatment) before sowing. In a review of stratification requirements for common milkweed, recommendations varied from as short as 7 days to as long as 11 months at 5°C (41°F) (Luna and Dumroese, 2013). Butterfly milkweed (A. tuberosa) germination increased from 29 to 48 to 62% as stratification duration increased from 0 to 30 to 60 days, respectively (Bir, 1986). Our informal natural stratification trial with showy (milkweed) and narrow leaf milkweed (A. fascicularis) in southern Oregon revealed that seeds began to germinate after 15 weeks in stratification (Fig. 3A).
Seed may be stubborn to germinate and may need a period of cold treatment..
Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Any of the standard seed propagation methods (Landis et al., 1999) are effective with milkweed. Direct sowing of non-stratified seeds during the fall followed by exposure to ambient winter conditions can be effective, but the seeds must be mulched and protected. Cover sown seeds with a thin mulch; research has found that common milkweed seeds germinated better when planted 1 to 2 cm (0.4 to 0.8 in.) deep than when at the soil surface (Jeffery and Robison, 1971).
Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Many sources of milkweed seeds require stratification (cold, moist treatment) before sowing. In a review of stratification requirements for common milkweed, recommendations varied from as short as 7 days to as long as 11 months at 5°C (41°F) (Luna and Dumroese, 2013). Butterfly milkweed (A. tuberosa) germination increased from 29 to 48 to 62% as stratification duration increased from 0 to 30 to 60 days, respectively (Bir, 1986). Our informal natural stratification trial with showy (milkweed) and narrow leaf milkweed (A. fascicularis) in southern Oregon revealed that seeds began to germinate after 15 weeks in stratification (Fig. 3A).
Seed may be stubborn to germinate and may need a period of cold treatment..
Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Many sources of milkweed seeds require stratification (cold, moist treatment) before sowing. In a review of stratification requirements for common milkweed, recommendations varied from as short as 7 days to as long as 11 months at 5°C (41°F) (Luna and Dumroese, 2013). Butterfly milkweed (A. tuberosa) germination increased from 29 to 48 to 62% as stratification duration increased from 0 to 30 to 60 days, respectively (Bir, 1986). Our informal natural stratification trial with showy (milkweed) and narrow leaf milkweed (A. fascicularis) in southern Oregon revealed that seeds began to germinate after 15 weeks in stratification (Fig. 3A).
Seed may be stubborn to germinate and may need a period of cold treatment..
Any of the standard seed propagation methods (Landis et al., 1999) are effective with milkweed. Direct sowing of non-stratified seeds during the fall followed by exposure to ambient winter conditions can be effective, but the seeds must be mulched and protected. Cover sown seeds with a thin mulch; research has found that common milkweed seeds germinated better when planted 1 to 2 cm (0.4 to 0.8 in.) deep than when at the soil surface (Jeffery and Robison, 1971).
Could roadside mowing stimulate milkweed growth and support monarch breeding? Limited research in eastern North America has shown that spring or summer mowing can promote new growth and extend the availability of milkweed plants for monarch breeding. Mowing may stimulate growth of some milkweed species, particularly those that spread through rhizomes like common milkweed (A. syriaca) and showy milkweed (A. speciosa). Summer (June or July) mowing in Michigan resulted in more monarch eggs on regenerated stems than unmowed stems. Summer (July) mowing and burning can increase green antelopehorn milkweed (A. viridis) availability in the late summer and early fall in the Southern Great Plains, whereas in areas without mowing, the milkweed has senesced by August. In the West, showy milkweed will regrow after summer mowing and continue to support monarch breeding (Stephanie McKnight, personal observation). However, more research is needed in other areas to determine the optimal timing and frequency of mowing that promotes not only milkweed but also nectar plants. It is also unknown if the benefit of additional milkweed availability in the fall outweighs the costs of the larval mortality caused by summer mowing. The benefits are likely greater in areas that primarily have breeding monarchs in the spring and fall and where the dominant species of milkweed spread by rhizomes. Sources: Alcock et al. 2016; Baum and Mueller, 2015; Bhowick 1994; Haan and Landis 2019; Fischer et al. 2015
{{cite book}}
: CS1 maint: multiple names: authors list (link)Any of the standard seed propagation methods (Landis et al., 1999) are effective with milkweed. Direct sowing of non-stratified seeds during the fall followed by exposure to ambient winter conditions can be effective, but the seeds must be mulched and protected. Cover sown seeds with a thin mulch; research has found that common milkweed seeds germinated better when planted 1 to 2 cm (0.4 to 0.8 in.) deep than when at the soil surface (Jeffery and Robison, 1971).