Bauschinger effect (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Bauschinger effect" in English language version.

refsWebsite

Global rank English rank

19doi.org

2^nd place

9worldcat.org

5^th place

4harvard.edu

18^th place

17^th place

2sciencedirect.com

149^th place

178^th place

2handle.net

102^nd place

76^th place

2asme.org

6,461^st place

4,142^nd place

1wiley.com

222^nd place

297^th place

1aip.org

2,204^th place

1,735^th place

1cambridge.org

305^th place

264^th place

1springer.com

274^th place

309^th place

1inderscience.com

low place

aip.org

pubs.aip.org

Nguyen, Van Tu; Vu, Ngoc Quang; Nguyen, Xuan Dai (2023). "Inelastic behavior of reinforced concrete buildings subjected to earthquakes". American Institute of Physics Conference Series. Advances in Sustainable Construction Materials. 2759 (1): 020056. Bibcode:2023AIPC.2497b0056N. doi:10.1063/5.0103457. Retrieved 2024-05-12.

asme.org

asmedigitalcollection.asme.org

Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.
Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.

cambridge.org

Lemaitre, Jean; Chaboche, Jean-Louis (1990). Mechanics of Solid Materials. Cambridge: Cambridge University Press. doi:10.1017/cbo9781139167970. ISBN 978-0-521-32853-1.

doi.org

Yoshida, Fusahito; Uemori, Takeshi; Fujiwara, Kenji (2002-10-01). "Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain". International Journal of Plasticity. 18 (5): 633–659. doi:10.1016/S0749-6419(01)00049-3. ISSN 0749-6419.
Chaboche, J. L. (2008-10-01). "A review of some plasticity and viscoplasticity constitutive theories". International Journal of Plasticity. Special Issue in Honor of Jean-Louis Chaboche. 24 (10): 1642–1693. doi:10.1016/j.ijplas.2008.03.009. ISSN 0749-6419.
A. A. Mamun, R. J. Moat, J. Kelleher, and P. J. Bouchard (2017). "Origin of the Bauschinger effect in a polycrystalline material". Mater. Sci. Eng. A. 707: 576–584. doi:10.1016/j.msea.2017.09.091.{{cite journal}}: CS1 maint: multiple names: authors list (link)
J. Hu, B. Chen, D. J. Smith, P. E. J. Flewitt, and A. C. F. Cocks (2016). "On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses". Int. J. Plast. 84: 203–223. doi:10.1016/j.ijplas.2016.05.009. hdl:1983/d21e10de-67ce-4129-8c0f-c6725f3a9295.{{cite journal}}: CS1 maint: multiple names: authors list (link)
B. Chen; J.N. Hu; Y.Q. Wang; S.Y. Zhang; S. Van Petegem; A.C.F. Cocks; D.J. Smith; P.E.J. Flewitt (2015). "Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material". Acta Mater. 85: 229–242. doi:10.1016/j.actamat.2014.11.021. hdl:2381/43316.
J. H. Kim, D. Kim, F. Barlat, and M.-G. Lee (2012). "Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels". Mater. Sci. Eng. A. 539: 259–270. doi:10.1016/j.msea.2012.01.092.{{cite journal}}: CS1 maint: multiple names: authors list (link)
C.-S. Han, R. H. Wagoner, and F. Barlat (2004). "On precipitate induced hardening in crystal plasticity: theory". Int. J. Plast. 20 (3): 477–494. doi:10.1016/S0749-6419(03)00098-6.{{cite journal}}: CS1 maint: multiple names: authors list (link)
Ibarra, Luis F.; Medina, Ricardo A.; Krawinkler, Helmut (2005-06-13). "Hysteretic models that incorporate strength and stiffness deterioration". Earthquake Engineering & Structural Dynamics. 34 (12): 1489–1511. Bibcode:2005EESD...34.1489I. doi:10.1002/eqe.495. ISSN 0098-8847.
Nguyen, Van Tu; Vu, Ngoc Quang; Nguyen, Xuan Dai (2023). "Inelastic behavior of reinforced concrete buildings subjected to earthquakes". American Institute of Physics Conference Series. Advances in Sustainable Construction Materials. 2759 (1): 020056. Bibcode:2023AIPC.2497b0056N. doi:10.1063/5.0103457. Retrieved 2024-05-12.
Lemaitre, Jean; Chaboche, Jean-Louis (1990). Mechanics of Solid Materials. Cambridge: Cambridge University Press. doi:10.1017/cbo9781139167970. ISBN 978-0-521-32853-1.
Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.
Banabic, Dorel (2010). Sheet Metal Forming Processes. doi:10.1007/978-3-540-88113-1. ISBN 978-3-540-88112-4.
Buciumeanu, M.; Palaghian, L.; Miranda, A.S.; Silva, F.S. (2010-08-01). "Fatigue life predictions including the Bauschinger effect". International Journal of Fatigue. 33 (2): 145–152. doi:10.1016/j.ijfatigue.2010.07.012. ISSN 0142-1123.
Zhu, Xianghui; Yang, Xusheng; Huang, Weijiu; Liu, Mofang; Wang, Xin; Li, Mengdi (2024-05-04). "Modeling Bauschinger effect through the reversibility of dislocation slip in an Al–Cu–Li alloy". Materials Science and Engineering: A. 902: 146574. doi:10.1016/j.msea.2024.146574. ISSN 0921-5093.
Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.
Li, Songbai; Liang, Wei; Yan, Hongzhi; Wang, Yuhang; Gu, Chu (2022-06-01). "Prediction of fatigue crack propagation behavior of AA2524 after laser shot peening". Engineering Fracture Mechanics. 268: 108477. doi:10.1016/j.engfracmech.2022.108477. ISSN 0013-7944.
Rakita, Milan; Wang, Meng; Han, Qingyou; Liu, Yanxiong; Yin, Fei (2013). "Ultrasonic shot peening". International Journal of Computational Materials Science and Surface Engineering. 5 (3): 189. doi:10.1504/IJCMSSE.2013.056948. ISSN 1753-3465.
Snitkoff, Joshua; Abdelfattah, Tarik; Russell, Ronnie (2016-09-26). "Flow-Biased Inflow Control Device Enhances Injection Rates While Still Maintaining Desired Production Resistance". Day 1 Mon, September 26, 2016. SPE. doi:10.2118/181492-ms.

dx.doi.org

Snitkoff, Joshua; Abdelfattah, Tarik; Russell, Ronnie (2016-09-26). "Flow-Biased Inflow Control Device Enhances Injection Rates While Still Maintaining Desired Production Resistance". Day 1 Mon, September 26, 2016. SPE. doi:10.2118/181492-ms.

handle.net

hdl.handle.net

J. Hu, B. Chen, D. J. Smith, P. E. J. Flewitt, and A. C. F. Cocks (2016). "On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses". Int. J. Plast. 84: 203–223. doi:10.1016/j.ijplas.2016.05.009. hdl:1983/d21e10de-67ce-4129-8c0f-c6725f3a9295.{{cite journal}}: CS1 maint: multiple names: authors list (link)
B. Chen; J.N. Hu; Y.Q. Wang; S.Y. Zhang; S. Van Petegem; A.C.F. Cocks; D.J. Smith; P.E.J. Flewitt (2015). "Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material". Acta Mater. 85: 229–242. doi:10.1016/j.actamat.2014.11.021. hdl:2381/43316.

harvard.edu

ui.adsabs.harvard.edu

Ibarra, Luis F.; Medina, Ricardo A.; Krawinkler, Helmut (2005-06-13). "Hysteretic models that incorporate strength and stiffness deterioration". Earthquake Engineering & Structural Dynamics. 34 (12): 1489–1511. Bibcode:2005EESD...34.1489I. doi:10.1002/eqe.495. ISSN 0098-8847.
Nguyen, Van Tu; Vu, Ngoc Quang; Nguyen, Xuan Dai (2023). "Inelastic behavior of reinforced concrete buildings subjected to earthquakes". American Institute of Physics Conference Series. Advances in Sustainable Construction Materials. 2759 (1): 020056. Bibcode:2023AIPC.2497b0056N. doi:10.1063/5.0103457. Retrieved 2024-05-12.
Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.
Jiang, Y.; Sehitoglu, H. (1996). "Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relation". Journal of Applied Mechanics. 63 (3): 720–725. Bibcode:1996JAM....63..720J. doi:10.1115/1.2823355. Retrieved 2024-05-10.

inderscience.com

Rakita, Milan; Wang, Meng; Han, Qingyou; Liu, Yanxiong; Yin, Fei (2013). "Ultrasonic shot peening". International Journal of Computational Materials Science and Surface Engineering. 5 (3): 189. doi:10.1504/IJCMSSE.2013.056948. ISSN 1753-3465.

sciencedirect.com

Yoshida, Fusahito; Uemori, Takeshi; Fujiwara, Kenji (2002-10-01). "Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain". International Journal of Plasticity. 18 (5): 633–659. doi:10.1016/S0749-6419(01)00049-3. ISSN 0749-6419.
Chaboche, J. L. (2008-10-01). "A review of some plasticity and viscoplasticity constitutive theories". International Journal of Plasticity. Special Issue in Honor of Jean-Louis Chaboche. 24 (10): 1642–1693. doi:10.1016/j.ijplas.2008.03.009. ISSN 0749-6419.

springer.com

link.springer.com

Banabic, Dorel (2010). Sheet Metal Forming Processes. doi:10.1007/978-3-540-88113-1. ISBN 978-3-540-88112-4.

wiley.com

onlinelibrary.wiley.com

Ibarra, Luis F.; Medina, Ricardo A.; Krawinkler, Helmut (2005-06-13). "Hysteretic models that incorporate strength and stiffness deterioration". Earthquake Engineering & Structural Dynamics. 34 (12): 1489–1511. Bibcode:2005EESD...34.1489I. doi:10.1002/eqe.495. ISSN 0098-8847.

worldcat.org

search.worldcat.org

Soboyejo, Wole O. (2003). "7.12 Dislocation Pile-ups and Bauschinger Effect". Mechanical properties of engineered materials. Marcel Dekker. ISBN 0-8247-8900-8. OCLC 300921090.
Yoshida, Fusahito; Uemori, Takeshi; Fujiwara, Kenji (2002-10-01). "Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain". International Journal of Plasticity. 18 (5): 633–659. doi:10.1016/S0749-6419(01)00049-3. ISSN 0749-6419.
Chaboche, J. L. (2008-10-01). "A review of some plasticity and viscoplasticity constitutive theories". International Journal of Plasticity. Special Issue in Honor of Jean-Louis Chaboche. 24 (10): 1642–1693. doi:10.1016/j.ijplas.2008.03.009. ISSN 0749-6419.
Ibarra, Luis F.; Medina, Ricardo A.; Krawinkler, Helmut (2005-06-13). "Hysteretic models that incorporate strength and stiffness deterioration". Earthquake Engineering & Structural Dynamics. 34 (12): 1489–1511. Bibcode:2005EESD...34.1489I. doi:10.1002/eqe.495. ISSN 0098-8847.
Buciumeanu, M.; Palaghian, L.; Miranda, A.S.; Silva, F.S. (2010-08-01). "Fatigue life predictions including the Bauschinger effect". International Journal of Fatigue. 33 (2): 145–152. doi:10.1016/j.ijfatigue.2010.07.012. ISSN 0142-1123.
Zhu, Xianghui; Yang, Xusheng; Huang, Weijiu; Liu, Mofang; Wang, Xin; Li, Mengdi (2024-05-04). "Modeling Bauschinger effect through the reversibility of dislocation slip in an Al–Cu–Li alloy". Materials Science and Engineering: A. 902: 146574. doi:10.1016/j.msea.2024.146574. ISSN 0921-5093.
Li, Songbai; Liang, Wei; Yan, Hongzhi; Wang, Yuhang; Gu, Chu (2022-06-01). "Prediction of fatigue crack propagation behavior of AA2524 after laser shot peening". Engineering Fracture Mechanics. 268: 108477. doi:10.1016/j.engfracmech.2022.108477. ISSN 0013-7944.
Rakita, Milan; Wang, Meng; Han, Qingyou; Liu, Yanxiong; Yin, Fei (2013). "Ultrasonic shot peening". International Journal of Computational Materials Science and Surface Engineering. 5 (3): 189. doi:10.1504/IJCMSSE.2013.056948. ISSN 1753-3465.

worldcat.org

Soboyejo, Wole O. (2003). "7.12 Dislocation Pile-ups and Bauschinger Effect". Mechanical properties of engineered materials. Marcel Dekker. ISBN 0-8247-8900-8. OCLC 300921090.