Bio-ink (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Bio-ink" in English language version.

refsWebsite

Global rank English rank

16nih.gov

4^th place

13doi.org

2^nd place

5harvard.edu

18^th place

17^th place

4semanticscholar.org

11^th place

8^th place

2worldcat.org

5^th place

1handle.net

102^nd place

76^th place

1rsc.org

2,020^th place

1,872^nd place

1wiley.com

222^nd place

297^th place

doi.org

Gungor-Ozkerim, Selcan (1 May 2018). "Bioinks for 3D bioprinting: an overview". Biomaterials Science. 6 (5): 915–946. doi:10.1039/c7bm00765e. PMC 6439477. PMID 29492503.
Xiaolin, Cui; et al. (30 April 2020). "Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks". Advanced Healthcare Materials. 9 (15): e1901648. doi:10.1002/adhm.201901648. PMID 32352649. S2CID 217547329.
Hölzl, Katja; Lin, Shengmao; Tytgat, Liesbeth; Van Vlierberghe, Sandra; Gu, Linxia; Ovsianikov, Aleksandr (September 23, 2016). "Bioink properties before, during and after 3D bioprinting". Biofabrication. 8 (3): 032002. Bibcode:2016BioFa...8c2002H. doi:10.1088/1758-5090/8/3/032002. hdl:1854/LU-8507720. PMID 27658612.
Gopinathan, J., Noh, I. Recent trends in bioinks for 3D printing. Biomater Res 22, 11 (2018). https://doi.org/10.1186/s40824-018-0122-1
Bernal, Paulina Nuñez; Delrot, Paul; Loterie, Damien; Li, Yang; Malda, Jos; Moser, Christophe; Levato, Riccardo (2019). "Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds". Advanced Materials. 31 (42): 1904209. Bibcode:2019AdM....3104209B. doi:10.1002/adma.201904209. ISSN 1521-4095. PMID 31423698.
Ouyang, Liliang (2016). "Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells". Biofabrication. 8 (3): 035020. Bibcode:2016BioFa...8c5020O. doi:10.1088/1758-5090/8/3/035020. PMID 27634915. S2CID 3773951.
Jia, Jia (2014). "Engineering alginate as bioink for bioprinting". Acta Biomaterialia. 10 (10): 4323–4331. doi:10.1016/j.actbio.2014.06.034. PMC 4350909. PMID 24998183.
Markstedt, Kajsa (2015). "3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications". Biomacromolecules. 16 (5): 1489–1496. doi:10.1021/acs.biomac.5b00188. PMID 25806996.
Hoch, Eva (2013). "Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting". Journal of Materials Chemistry B. 1 (41): 5675–5685. doi:10.1039/c3tb20745e. PMID 32261191.
Müller, Michael (2015). "Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting". Biofabrication. 7 (3): 035006. Bibcode:2015BioFa...7c5006M. doi:10.1088/1758-5090/7/3/035006. PMID 26260872. S2CID 22520236.
Pati, Falguni (2014). "Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink". Nature Communications. 5 (5): 3935. Bibcode:2014NatCo...5.3935P. doi:10.1038/ncomms4935. PMC 4059935. PMID 24887553.
Jang, Jinah (2016). "Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking". Acta Biomaterialia. 33: 88–95. doi:10.1016/j.actbio.2016.01.013. PMID 26774760.
Abaci, Alperen; Guvendiren, Murat (December 2020). "Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting". Advanced Healthcare Materials. 9 (24): e2000734. doi:10.1002/adhm.202000734. ISSN 2192-2640. PMID 32691980. S2CID 220671307.

handle.net

hdl.handle.net

Hölzl, Katja; Lin, Shengmao; Tytgat, Liesbeth; Van Vlierberghe, Sandra; Gu, Linxia; Ovsianikov, Aleksandr (September 23, 2016). "Bioink properties before, during and after 3D bioprinting". Biofabrication. 8 (3): 032002. Bibcode:2016BioFa...8c2002H. doi:10.1088/1758-5090/8/3/032002. hdl:1854/LU-8507720. PMID 27658612.

harvard.edu

ui.adsabs.harvard.edu

Hölzl, Katja; Lin, Shengmao; Tytgat, Liesbeth; Van Vlierberghe, Sandra; Gu, Linxia; Ovsianikov, Aleksandr (September 23, 2016). "Bioink properties before, during and after 3D bioprinting". Biofabrication. 8 (3): 032002. Bibcode:2016BioFa...8c2002H. doi:10.1088/1758-5090/8/3/032002. hdl:1854/LU-8507720. PMID 27658612.
Bernal, Paulina Nuñez; Delrot, Paul; Loterie, Damien; Li, Yang; Malda, Jos; Moser, Christophe; Levato, Riccardo (2019). "Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds". Advanced Materials. 31 (42): 1904209. Bibcode:2019AdM....3104209B. doi:10.1002/adma.201904209. ISSN 1521-4095. PMID 31423698.
Ouyang, Liliang (2016). "Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells". Biofabrication. 8 (3): 035020. Bibcode:2016BioFa...8c5020O. doi:10.1088/1758-5090/8/3/035020. PMID 27634915. S2CID 3773951.
Müller, Michael (2015). "Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting". Biofabrication. 7 (3): 035006. Bibcode:2015BioFa...7c5006M. doi:10.1088/1758-5090/7/3/035006. PMID 26260872. S2CID 22520236.
Pati, Falguni (2014). "Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink". Nature Communications. 5 (5): 3935. Bibcode:2014NatCo...5.3935P. doi:10.1038/ncomms4935. PMC 4059935. PMID 24887553.

nih.gov

pubmed.ncbi.nlm.nih.gov

Gungor-Ozkerim, Selcan (1 May 2018). "Bioinks for 3D bioprinting: an overview". Biomaterials Science. 6 (5): 915–946. doi:10.1039/c7bm00765e. PMC 6439477. PMID 29492503.
Xiaolin, Cui; et al. (30 April 2020). "Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks". Advanced Healthcare Materials. 9 (15): e1901648. doi:10.1002/adhm.201901648. PMID 32352649. S2CID 217547329.
Hölzl, Katja; Lin, Shengmao; Tytgat, Liesbeth; Van Vlierberghe, Sandra; Gu, Linxia; Ovsianikov, Aleksandr (September 23, 2016). "Bioink properties before, during and after 3D bioprinting". Biofabrication. 8 (3): 032002. Bibcode:2016BioFa...8c2002H. doi:10.1088/1758-5090/8/3/032002. hdl:1854/LU-8507720. PMID 27658612.
Bernal, Paulina Nuñez; Delrot, Paul; Loterie, Damien; Li, Yang; Malda, Jos; Moser, Christophe; Levato, Riccardo (2019). "Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds". Advanced Materials. 31 (42): 1904209. Bibcode:2019AdM....3104209B. doi:10.1002/adma.201904209. ISSN 1521-4095. PMID 31423698.
Ouyang, Liliang (2016). "Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells". Biofabrication. 8 (3): 035020. Bibcode:2016BioFa...8c5020O. doi:10.1088/1758-5090/8/3/035020. PMID 27634915. S2CID 3773951.
Jia, Jia (2014). "Engineering alginate as bioink for bioprinting". Acta Biomaterialia. 10 (10): 4323–4331. doi:10.1016/j.actbio.2014.06.034. PMC 4350909. PMID 24998183.
Markstedt, Kajsa (2015). "3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications". Biomacromolecules. 16 (5): 1489–1496. doi:10.1021/acs.biomac.5b00188. PMID 25806996.
Hoch, Eva (2013). "Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting". Journal of Materials Chemistry B. 1 (41): 5675–5685. doi:10.1039/c3tb20745e. PMID 32261191.
Tirnaksiz, Figen (2005). "Rheological, mucoadhesive and release properties of pluronic F-127 gel and pluronic F-127/polycarbophil mixed gel systems". Die Pharmazie. 60 (7): 518–23. PMID 16076078.
Müller, Michael (2015). "Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting". Biofabrication. 7 (3): 035006. Bibcode:2015BioFa...7c5006M. doi:10.1088/1758-5090/7/3/035006. PMID 26260872. S2CID 22520236.
Pati, Falguni (2014). "Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink". Nature Communications. 5 (5): 3935. Bibcode:2014NatCo...5.3935P. doi:10.1038/ncomms4935. PMC 4059935. PMID 24887553.
Jang, Jinah (2016). "Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking". Acta Biomaterialia. 33: 88–95. doi:10.1016/j.actbio.2016.01.013. PMID 26774760.
Abaci, Alperen; Guvendiren, Murat (December 2020). "Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting". Advanced Healthcare Materials. 9 (24): e2000734. doi:10.1002/adhm.202000734. ISSN 2192-2640. PMID 32691980. S2CID 220671307.

ncbi.nlm.nih.gov

Gungor-Ozkerim, Selcan (1 May 2018). "Bioinks for 3D bioprinting: an overview". Biomaterials Science. 6 (5): 915–946. doi:10.1039/c7bm00765e. PMC 6439477. PMID 29492503.
Jia, Jia (2014). "Engineering alginate as bioink for bioprinting". Acta Biomaterialia. 10 (10): 4323–4331. doi:10.1016/j.actbio.2014.06.034. PMC 4350909. PMID 24998183.
Pati, Falguni (2014). "Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink". Nature Communications. 5 (5): 3935. Bibcode:2014NatCo...5.3935P. doi:10.1038/ncomms4935. PMC 4059935. PMID 24887553.

rsc.org

pubs.rsc.org

Hoch, Eva (2013). "Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting". Journal of Materials Chemistry B. 1 (41): 5675–5685. doi:10.1039/c3tb20745e. PMID 32261191.

semanticscholar.org

api.semanticscholar.org

Xiaolin, Cui; et al. (30 April 2020). "Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks". Advanced Healthcare Materials. 9 (15): e1901648. doi:10.1002/adhm.201901648. PMID 32352649. S2CID 217547329.
Ouyang, Liliang (2016). "Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells". Biofabrication. 8 (3): 035020. Bibcode:2016BioFa...8c5020O. doi:10.1088/1758-5090/8/3/035020. PMID 27634915. S2CID 3773951.
Müller, Michael (2015). "Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting". Biofabrication. 7 (3): 035006. Bibcode:2015BioFa...7c5006M. doi:10.1088/1758-5090/7/3/035006. PMID 26260872. S2CID 22520236.
Abaci, Alperen; Guvendiren, Murat (December 2020). "Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting". Advanced Healthcare Materials. 9 (24): e2000734. doi:10.1002/adhm.202000734. ISSN 2192-2640. PMID 32691980. S2CID 220671307.

wiley.com

onlinelibrary.wiley.com

Abaci, Alperen; Guvendiren, Murat (December 2020). "Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting". Advanced Healthcare Materials. 9 (24): e2000734. doi:10.1002/adhm.202000734. ISSN 2192-2640. PMID 32691980. S2CID 220671307.

worldcat.org

Bernal, Paulina Nuñez; Delrot, Paul; Loterie, Damien; Li, Yang; Malda, Jos; Moser, Christophe; Levato, Riccardo (2019). "Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds". Advanced Materials. 31 (42): 1904209. Bibcode:2019AdM....3104209B. doi:10.1002/adma.201904209. ISSN 1521-4095. PMID 31423698.
Abaci, Alperen; Guvendiren, Murat (December 2020). "Designing Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting". Advanced Healthcare Materials. 9 (24): e2000734. doi:10.1002/adhm.202000734. ISSN 2192-2640. PMID 32691980. S2CID 220671307.