Reinforcement in concrete 3D printing (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Reinforcement in concrete 3D printing" in English language version.

Last modified: 00:02:07, 21 July 2026 (UTC)

Ref.Un. Ref.Website

Global rank English rank

3023doi.org

2^nd place

1611semanticscholar.org

15^th place

8^th place

42tue.nl

9,533^rd place

6,917^th place

31hdl.handle.net

66^th place

34^th place

22adsabs.harvard.edu

14^th place

9^th place

22nih.gov

5^th place

21uni-augsburg.de

low place

11army.mil

250^th place

134^th place

11qub.ac.uk

8,484^th place

4,941^st place

11pci.org

low place

11asme.org

6,567^th place

3,977^th place

11dfabhouse.ch

low place

11worldcat.org

4^th place

11archives-ouvertes.fr

1,143^rd place

973^rd place

11lboro.ac.uk

5,360^th place

4,226^th place

11designboom.com

9,484^th place

5,941^st place

11iaacblog.com

low place

11tu-braunschweig.de

low place

adsabs.harvard.edu (Global: 14^th place; English: 9^th place)

ui.adsabs.harvard.edu

Bos, Freek; Ahmed, Zeeshan; Jutinov, Evgeniy; Salet, Theo (2017-11-16). "Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete". Materials. 10 (11): 1314. Bibcode:2017Mate...10.1314B. doi:10.3390/ma10111314. ISSN 1996-1944. PMC 5706261. PMID 29144426.
Panda, Biranchi; Chandra Paul, Suvash; Jen Tan, Ming (December 2017). "Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material". Materials Letters. 209: 146–149. Bibcode:2017MatL..209..146P. doi:10.1016/J.MATLET.2017.07.123.

archives-ouvertes.fr (Global: 1,143^rd place; English: 973^rd place)

hal.archives-ouvertes.fr

Caron, Jean-François; Demont, Léo; Ducoulombier, Nicolas; Mesnil, Romain (2021-06-01). "3D printing of mortar with continuous fibres: Principle, properties and potential for application" (PDF). Automation in Construction. 129 (1): 1314. doi:10.1016/j.autcon.2021.103806.

army.mil (Global: 250^th place; English: 134^th place)

erdc.usace.army.mil

"ERDC researchers are a driving force in construction scale 3D printing". Engineer Research and Development Center. Retrieved 2021-06-16.

asme.org (Global: 6,567^th place; English: 3,977^th place)

MacRae, Michael. "The 3D Printed Office of the Future". www.asme.org. Retrieved 17 June 2021.

designboom.com (Global: 9,484^th place; English: 5,941^st place)

"TU eindhoven's 3D-printed concrete bicycle bridge first of its kind". designboom | architecture & design magazine. 2017-09-08. Retrieved 17 June 2021.

dfabhouse.ch (Global: low place; English: low place)

"DFAB HOUSE". dfabhouse.ch. Retrieved 17 June 2021.

doi.org (Global: 2^nd place; English: 2^nd place)

Khan, Mohammad S.; Sanchez, Florence; Zhou, Hongyu (2020). "3-D printing of concrete: Beyond horizons". Cement and Concrete Research. 133 106070. doi:10.1016/j.cemconres.2020.106070.
Menna, Costantino; Mata-Falcón, Jaime; Bos, Freek P.; Vantyghem, Gieljan; Ferrara, Liberato; Asprone, Domenico; Salet, Theo; Kaufmann, Walter (16 April 2020). "Opportunities and challenges for structural engineering of digitally fabricated concrete". Cement and Concrete Research. 133 106079. doi:10.1016/j.cemconres.2020.106079. hdl:20.500.11850/410593. S2CID 218795787.
Bos, Freek; Wolfs, Rob; Salet, Theo (2020). "CCR Digital Concrete 2020 SI: Editorial". Cement and Concrete Research. 135 106157. doi:10.1016/j.cemconres.2020.106157. S2CID 225346198.
Mechtcherine, V.; Bos, F.P.; Perrot, A.; da Silva, W.R. Leal; Nerella, V.N.; Fataei, S.; Wolfs, R.J.M.; Sonebi, M.; Roussel, N. (2020). "Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review" (PDF). Cement and Concrete Research. 132 106037. doi:10.1016/j.cemconres.2020.106037. S2CID 216237233.
Kloft, Harald; Empelmann, Martin; Hack, Norman; Herrmann, Eric; Lowke, Dirk (2020). "Reinforcement strategies for 3D-concrete-printing". Civil Engineering Design. 2 (4): 131–139. doi:10.1002/cend.202000022.
Asprone, Domenico; Menna, Costantino; Bos, Freek P.; Salet, Theo A.M.; Mata-Falcón, Jaime; Kaufmann, Walter (October 2018). "Rethinking reinforcement for digital fabrication with concrete" (PDF). Cement and Concrete Research. 112: 111–121. doi:10.1016/j.cemconres.2018.05.020. S2CID 139415657.
Marchment, Taylor; Sanjayan, Jay (December 2020). "Bond properties of reinforcing bar penetrations in 3D concrete printing". Automation in Construction. 120 103394. doi:10.1016/j.autcon.2020.103394. S2CID 225021526.
Kloft, Harald; Empelmann, Martin; Hack, Norman; Herrmann, Eric; Lowke, Dirk (August 2020). "Reinforcement strategies for 3D-concrete-printing". Civil Engineering Design. 2 (4): 131–139. doi:10.1002/cend.202000022.
Kreiger, Eric L.; Kreiger, Megan A.; Case, Michael P. (August 2019). "Development of the construction processes for reinforced additively constructed concrete". Additive Manufacturing. 28: 39–49. doi:10.1016/j.addma.2019.02.015. S2CID 155452051.
Fioretti, Marta; Sriram Kompella, K.; Lo Monte, Francesco; Esposito, Laura; Menna, Costantino; Moro, Sandro; Asprone, Domenico; Ferrara, Liberato (2020). "Experimental Investigation on the Early Age Tensile Strength of Fiber Reinforced Mortar Used in 3D Concrete Printing". Second RILEM International Conference on Concrete and Digital Fabrication. RILEM Bookseries. Vol. 28. pp. 255–261. doi:10.1007/978-3-030-49916-7_26. ISBN 978-3-030-49915-0. S2CID 225604496.
Lloret, Ena; Shahab, Amir R.; Linus, Mettler; Flatt, Robert J.; Gramazio, Fabio; Kohler, Matthias; Langenberg, Silke (March 2015). "Complex concrete structures". Computer-Aided Design. 60: 40–49. doi:10.1016/j.cad.2014.02.011.
Marchment, Taylor; Sanjayan, Jay (2020). "Mesh reinforcing method for 3D Concrete Printing". Automation in Construction. 109 102992. doi:10.1016/j.autcon.2019.102992. S2CID 208836158.
Bos, Freek; Ahmed, Zeeshan; Jutinov, Evgeniy; Salet, Theo (2017-11-16). "Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete". Materials. 10 (11): 1314. Bibcode:2017Mate...10.1314B. doi:10.3390/ma10111314. ISSN 1996-1944. PMC 5706261. PMID 29144426.
Caron, Jean-François; Demont, Léo; Ducoulombier, Nicolas; Mesnil, Romain (2021-06-01). "3D printing of mortar with continuous fibres: Principle, properties and potential for application" (PDF). Automation in Construction. 129 (1): 1314. doi:10.1016/j.autcon.2021.103806.
Lim, S.; Buswell, R.A.; Le, T.T.; Austin, S.A.; Gibb, A.G.F.; Thorpe, T. (January 2012). "Developments in construction-scale additive manufacturing processes" (PDF). Automation in Construction. 21: 262–268. doi:10.1016/j.autcon.2011.06.010. S2CID 56183627.
Salet, Theo A. M.; Ahmed, Zeeshan Y.; Bos, Freek P.; Laagland, Hans L. M. (2018-07-03). "Design of a 3D printed concrete bridge by testing" (PDF). Virtual and Physical Prototyping. 13 (3): 222–236. doi:10.1080/17452759.2018.1476064. S2CID 53610067.
Hambach, Manuel; Volkmer, Dirk (May 2017). "Properties of 3D-printed fiber-reinforced Portland cement paste" (PDF). Cement and Concrete Composites. 79: 62–70. doi:10.1016/j.cemconcomp.2017.02.001.
Arunothayan, Arun R.; Nematollahi, Behzad; Ranade, Ravi; Bong, Shin Hau; Sanjayan, Jay G.; Khayat, Kamal H. (May 2021). "Fiber orientation effects on ultra-high performance concrete formed by 3D printing". Cement and Concrete Research. 143 106384. doi:10.1016/j.cemconres.2021.106384. S2CID 233566522.
Panda, Biranchi; Chandra Paul, Suvash; Jen Tan, Ming (December 2017). "Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material". Materials Letters. 209: 146–149. Bibcode:2017MatL..209..146P. doi:10.1016/J.MATLET.2017.07.123.
Asprone, Domenico; Auricchio, Ferdinando; Menna, Costantino; Mercuri, Valentina (March 2018). "3D printing of reinforced concrete elements: Technology and design approach". Construction and Building Materials. 165: 218–231. doi:10.1016/j.conbuildmat.2018.01.018.
Khosrow Ghavami, Bamboo as reinforcement in structural concrete elements, Cement and Concrete Composites, Volume 27, Issue 6, 2005, Pages 637-649, ISSN 0958-9465, Accessed 31 Jan 2022, https://doi.org/10.1016/j.cemconcomp.2004.06.002
Wu, Zhengyu; Memari, Ali M.; Duarte, Jose P. (January 2022). "State of the Art Review of Reinforcement Strategies and Technologies for 3D Printing of Concrete". Energies. 15 (1): 360. doi:10.3390/en15010360.
Müller, Johanna; Grabowski, Marcel; Müller, Christoph; Hensel, Jonas; Unglaub, Julian; Thiele, Klaus; Kloft, Harald; Dilger, Klaus (2019-06-27). "Design and Parameter Identification of Wire and Arc Additively Manufactured (WAAM) Steel Bars for Use in Construction" (PDF). Metals. 9 (7): 725. doi:10.3390/met9070725.

hdl.handle.net (Global: 66^th place; English: 34^th place)

Menna, Costantino; Mata-Falcón, Jaime; Bos, Freek P.; Vantyghem, Gieljan; Ferrara, Liberato; Asprone, Domenico; Salet, Theo; Kaufmann, Walter (16 April 2020). "Opportunities and challenges for structural engineering of digitally fabricated concrete". Cement and Concrete Research. 133 106079. doi:10.1016/j.cemconres.2020.106079. hdl:20.500.11850/410593. S2CID 218795787.

iaacblog.com (Global: low place; English: low place)

"SIMULTANEOUS REINFORCEMENT OF CONCRETE WHILE 3D PRINTING". IAAC Blog. Retrieved 17 June 2021.

lboro.ac.uk (Global: 5,360^th place; English: 4,226^th place)

repository.lboro.ac.uk

Lim, S.; Buswell, R.A.; Le, T.T.; Austin, S.A.; Gibb, A.G.F.; Thorpe, T. (January 2012). "Developments in construction-scale additive manufacturing processes" (PDF). Automation in Construction. 21: 262–268. doi:10.1016/j.autcon.2011.06.010. S2CID 56183627.

nih.gov (Global: 5^th place; English: 5^th place)

ncbi.nlm.nih.gov

Bos, Freek; Ahmed, Zeeshan; Jutinov, Evgeniy; Salet, Theo (2017-11-16). "Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete". Materials. 10 (11): 1314. Bibcode:2017Mate...10.1314B. doi:10.3390/ma10111314. ISSN 1996-1944. PMC 5706261. PMID 29144426.

pubmed.ncbi.nlm.nih.gov

Bos, Freek; Ahmed, Zeeshan; Jutinov, Evgeniy; Salet, Theo (2017-11-16). "Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete". Materials. 10 (11): 1314. Bibcode:2017Mate...10.1314B. doi:10.3390/ma10111314. ISSN 1996-1944. PMC 5706261. PMID 29144426.

pci.org (Global: low place; English: low place)

Alawneh, Musa; Matarneh, Motasem; El-Ashri, Sameh. "THE WORLD'S FIRST 3D–PRINTED OFFICE BUILDING IN DUBAI" (PDF). Retrieved 17 June 2021.

qub.ac.uk (Global: 8,484^th place; English: 4,941^st place)

pureadmin.qub.ac.uk

Mechtcherine, V.; Bos, F.P.; Perrot, A.; da Silva, W.R. Leal; Nerella, V.N.; Fataei, S.; Wolfs, R.J.M.; Sonebi, M.; Roussel, N. (2020). "Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review" (PDF). Cement and Concrete Research. 132 106037. doi:10.1016/j.cemconres.2020.106037. S2CID 216237233.

semanticscholar.org (Global: 15^th place; English: 8^th place)

api.semanticscholar.org

Menna, Costantino; Mata-Falcón, Jaime; Bos, Freek P.; Vantyghem, Gieljan; Ferrara, Liberato; Asprone, Domenico; Salet, Theo; Kaufmann, Walter (16 April 2020). "Opportunities and challenges for structural engineering of digitally fabricated concrete". Cement and Concrete Research. 133 106079. doi:10.1016/j.cemconres.2020.106079. hdl:20.500.11850/410593. S2CID 218795787.
Bos, Freek; Wolfs, Rob; Salet, Theo (2020). "CCR Digital Concrete 2020 SI: Editorial". Cement and Concrete Research. 135 106157. doi:10.1016/j.cemconres.2020.106157. S2CID 225346198.
Mechtcherine, V.; Bos, F.P.; Perrot, A.; da Silva, W.R. Leal; Nerella, V.N.; Fataei, S.; Wolfs, R.J.M.; Sonebi, M.; Roussel, N. (2020). "Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review" (PDF). Cement and Concrete Research. 132 106037. doi:10.1016/j.cemconres.2020.106037. S2CID 216237233.
Asprone, Domenico; Menna, Costantino; Bos, Freek P.; Salet, Theo A.M.; Mata-Falcón, Jaime; Kaufmann, Walter (October 2018). "Rethinking reinforcement for digital fabrication with concrete" (PDF). Cement and Concrete Research. 112: 111–121. doi:10.1016/j.cemconres.2018.05.020. S2CID 139415657.
Marchment, Taylor; Sanjayan, Jay (December 2020). "Bond properties of reinforcing bar penetrations in 3D concrete printing". Automation in Construction. 120 103394. doi:10.1016/j.autcon.2020.103394. S2CID 225021526.
Kreiger, Eric L.; Kreiger, Megan A.; Case, Michael P. (August 2019). "Development of the construction processes for reinforced additively constructed concrete". Additive Manufacturing. 28: 39–49. doi:10.1016/j.addma.2019.02.015. S2CID 155452051.
Fioretti, Marta; Sriram Kompella, K.; Lo Monte, Francesco; Esposito, Laura; Menna, Costantino; Moro, Sandro; Asprone, Domenico; Ferrara, Liberato (2020). "Experimental Investigation on the Early Age Tensile Strength of Fiber Reinforced Mortar Used in 3D Concrete Printing". Second RILEM International Conference on Concrete and Digital Fabrication. RILEM Bookseries. Vol. 28. pp. 255–261. doi:10.1007/978-3-030-49916-7_26. ISBN 978-3-030-49915-0. S2CID 225604496.
Marchment, Taylor; Sanjayan, Jay (2020). "Mesh reinforcing method for 3D Concrete Printing". Automation in Construction. 109 102992. doi:10.1016/j.autcon.2019.102992. S2CID 208836158.
Lim, S.; Buswell, R.A.; Le, T.T.; Austin, S.A.; Gibb, A.G.F.; Thorpe, T. (January 2012). "Developments in construction-scale additive manufacturing processes" (PDF). Automation in Construction. 21: 262–268. doi:10.1016/j.autcon.2011.06.010. S2CID 56183627.
Salet, Theo A. M.; Ahmed, Zeeshan Y.; Bos, Freek P.; Laagland, Hans L. M. (2018-07-03). "Design of a 3D printed concrete bridge by testing" (PDF). Virtual and Physical Prototyping. 13 (3): 222–236. doi:10.1080/17452759.2018.1476064. S2CID 53610067.
Arunothayan, Arun R.; Nematollahi, Behzad; Ranade, Ravi; Bong, Shin Hau; Sanjayan, Jay G.; Khayat, Kamal H. (May 2021). "Fiber orientation effects on ultra-high performance concrete formed by 3D printing". Cement and Concrete Research. 143 106384. doi:10.1016/j.cemconres.2021.106384. S2CID 233566522.

tu-braunschweig.de (Global: low place; English: low place)

leopard.tu-braunschweig.de

Müller, Johanna; Grabowski, Marcel; Müller, Christoph; Hensel, Jonas; Unglaub, Julian; Thiele, Klaus; Kloft, Harald; Dilger, Klaus (2019-06-27). "Design and Parameter Identification of Wire and Arc Additively Manufactured (WAAM) Steel Bars for Use in Construction" (PDF). Metals. 9 (7): 725. doi:10.3390/met9070725.

tue.nl (Global: 9,533^rd place; English: 6,917^th place)

pure.tue.nl

Asprone, Domenico; Menna, Costantino; Bos, Freek P.; Salet, Theo A.M.; Mata-Falcón, Jaime; Kaufmann, Walter (October 2018). "Rethinking reinforcement for digital fabrication with concrete" (PDF). Cement and Concrete Research. 112: 111–121. doi:10.1016/j.cemconres.2018.05.020. S2CID 139415657.
Salet, Theo A. M.; Ahmed, Zeeshan Y.; Bos, Freek P.; Laagland, Hans L. M. (2018-07-03). "Design of a 3D printed concrete bridge by testing" (PDF). Virtual and Physical Prototyping. 13 (3): 222–236. doi:10.1080/17452759.2018.1476064. S2CID 53610067.

uni-augsburg.de (Global: low place; English: low place)

opus.bibliothek.uni-augsburg.de

Hambach, Manuel; Volkmer, Dirk (May 2017). "Properties of 3D-printed fiber-reinforced Portland cement paste" (PDF). Cement and Concrete Composites. 79: 62–70. doi:10.1016/j.cemconcomp.2017.02.001.

worldcat.org (Global: 4^th place; English: 4^th place)

search.worldcat.org

Bos, Freek; Ahmed, Zeeshan; Jutinov, Evgeniy; Salet, Theo (2017-11-16). "Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete". Materials. 10 (11): 1314. Bibcode:2017Mate...10.1314B. doi:10.3390/ma10111314. ISSN 1996-1944. PMC 5706261. PMID 29144426.

Reinforcement in concrete 3D printing (English Wikipedia)

adsabs.harvard.edu (Global: 14th place; English: 9th place)

ui.adsabs.harvard.edu

archives-ouvertes.fr (Global: 1,143rd place; English: 973rd place)

hal.archives-ouvertes.fr

army.mil (Global: 250th place; English: 134th place)

erdc.usace.army.mil

asme.org (Global: 6,567th place; English: 3,977th place)

designboom.com (Global: 9,484th place; English: 5,941st place)

dfabhouse.ch (Global: low place; English: low place)

doi.org (Global: 2nd place; English: 2nd place)

hdl.handle.net (Global: 66th place; English: 34th place)

iaacblog.com (Global: low place; English: low place)

lboro.ac.uk (Global: 5,360th place; English: 4,226th place)

repository.lboro.ac.uk

nih.gov (Global: 5th place; English: 5th place)

ncbi.nlm.nih.gov

pubmed.ncbi.nlm.nih.gov

pci.org (Global: low place; English: low place)

qub.ac.uk (Global: 8,484th place; English: 4,941st place)

pureadmin.qub.ac.uk

semanticscholar.org (Global: 15th place; English: 8th place)

api.semanticscholar.org

tu-braunschweig.de (Global: low place; English: low place)

leopard.tu-braunschweig.de

tue.nl (Global: 9,533rd place; English: 6,917th place)

pure.tue.nl

uni-augsburg.de (Global: low place; English: low place)

opus.bibliothek.uni-augsburg.de

worldcat.org (Global: 4th place; English: 4th place)

search.worldcat.org

adsabs.harvard.edu (Global: 14^th place; English: 9^th place)

archives-ouvertes.fr (Global: 1,143^rd place; English: 973^rd place)

army.mil (Global: 250^th place; English: 134^th place)

asme.org (Global: 6,567^th place; English: 3,977^th place)

designboom.com (Global: 9,484^th place; English: 5,941^st place)

doi.org (Global: 2^nd place; English: 2^nd place)

hdl.handle.net (Global: 66^th place; English: 34^th place)

lboro.ac.uk (Global: 5,360^th place; English: 4,226^th place)

nih.gov (Global: 5^th place; English: 5^th place)

qub.ac.uk (Global: 8,484^th place; English: 4,941^st place)

semanticscholar.org (Global: 15^th place; English: 8^th place)

tue.nl (Global: 9,533^rd place; English: 6,917^th place)

worldcat.org (Global: 4^th place; English: 4^th place)