References analysis of the Wikipedia article "Respirator assigned protection factors" in the English version

cdc.gov

Bollinger, Nancy; Campbell, Donald; Coffey, Christopher (2004). "III. Respirator Selection Logic Sequence". NIOSH Respirator Selection Logic. DHHS (NIOSH) Publication No. 2005-100. NIOSH Respirator Policy Group; Heinz Ahlers, Roland BerryAnn, Frank Hearl, Richard Metzler, Teresa Seitz, Douglas Trout and Ralph Zumwalde. Cincinnati, OH: The National Institute for Occupational Safety and Health (NIOSH). p. 39. doi:10.26616/NIOSHPUB2005100.

Bollinger, Nancy (2004-10-01). "NIOSH respirator selection logic". U.S. National Institute for Occupational Safety and Health: 5–16. doi:10.26616/NIOSHPUB2005100. Retrieved 2020-04-20. For download on Wikimedia Commons: PDF fulltext

Radonovich, Lew (September 5, 2017). "Elastomeric and Powered-Air Purifying Respirators in U.S. Healthcare" (PDF).

Nancy J. Bollinger, Robert H. Schutz, ed. (1987). NIOSH Guide to Industrial Respiratory Protection. DHHS (NIOSH) Publication No 87-116. Cincinnati, Ohio: National Institute for Occupational Safety and Health. p. 305. doi:10.26616/NIOSHPUB87116.

Michael E. Barsan, ed. (2007). NIOSH Pocket guide to chemical hazards. DHHS (NIOSH) Publication No. 2005-149 (3 ed.). Cincinnati, Ohio: National Institute for Occupational Safety and Health. p. 454. doi:10.26616/NIOSHPUB87108.. New on-line version on NIOSH site (more detailed version).

doi.org

Griffin, G. and D.J. Longson (1970). "The Hasard Due Inward Leakage of Gas into a Full Face Mask". The Annals of Occupational Hygiene. 13 (2): 147–151. doi:10.1093/annhyg/13.2.147. ISSN 0003-4878. PMID 5431896.

Hounam, R. F.; D. J. Morgan; D. T. O'Connor; R. J. Sherwood (1964). "The Evaluation of Protection Provided by Respirators". The Annals of Occupational Hygiene. 7 (4): 353–363. doi:10.1093/annhyg/7.4.353. ISSN 0003-4878. PMID 14266238.

Burgess, William; Leslie Silverman; Felix Stein (1961). "A New Technique for Evaluating Respirator Performance". American Industrial Hygiene Association Journal. 22 (6): 422–429. doi:10.1080/00028896109343432. ISSN 0002-8894. PMID 13874833.

Hyatt, E. C.; J. A. Pritchard; C.P. Richards (1972). "Respirator Efficiency Measurement Using Quantitative DOP Man Tests". American Industrial Hygiene Association Journal. 33 (10): 635–643. doi:10.1080/0002889728506721. ISSN 0002-8894. PMID 4512979.

Lee, Shu-An; Sergey Grinshpun (2005). "Laboratory and Field Evaluation of a New Personal Sampling System for Assessing the Protection Provided by the N95 Filtering Facepiece Respirators against Particles". The Annals of Occupational Hygiene. 49 (3): 245–257. doi:10.1093/annhyg/meh097. ISSN 0003-4878. PMID 15668259.

Zhuang, Ziqing; Christopher C. Coffey; Paul A. Jensen; Donald L. Campbell; Robert B. Lawrence; Warren R. Myers (2003). "Correlation Between Quantitative Fit Factors and Workplace Protection Factors Measured in Actual Workplace Environments at a Steel Foundry". American Industrial Hygiene Association Journal. 64 (6): 730–738. doi:10.1080/15428110308984867. ISSN 1542-8117. PMID 14674806.

Kirillov, Vladimir; et al. (2014). "Overview of Industrial Testing Outcome of Respiratory Organs Personal Protection Equipment". Toksikologicheskiy Vestnik (in English and Russian). 6 (129): 44–49. doi:10.17686/sced_rusnauka_2014-1034. ISSN 0869-7922.

Lenhart, Steeven; Donald L. Campbell (1984). "Assigned protection factors for two respirators types based upon workplace performance testing". The Annals of Occupational Hygiene. 28 (2): 173–182. doi:10.1093/annhyg/28.2.173. ISSN 1475-3162. PMID 6476685.

Nelson, Thomas (1996). "The Assigned Protection Factor According to ANSI". American Industrial Hygiene Association Journal. 57 (8): 735–740. doi:10.1080/15428119691014594. ISSN 1542-8117. PMID 8765202.

Myers, Warren; M.J. Peach; K. Cutright; W. Iskander (1984). "Workplace Protection Factor Measurements on Powered Air-Purifying Respirators at a Secondary Lead Smelter: Results and Discussion". American Industrial Hygiene Association Journal. 45 (10): 681–688. doi:10.1080/15298668491400449. ISSN 1542-8117. PMID 6496315.

Tannahill, S.N.; R.J. Willey; M.H. Jackson (1990). "Workplace Protection Factors of HSE Approved Negative Pressure Full-Facepiece Dust Respirators During Asbestos Stripping: Preliminary Findings". The Annals of Occupational Hygiene. 34 (6): 541–552. doi:10.1093/annhyg/34.6.547. ISSN 1475-3162. PMID 2291579.

Wallis G.; Menke R.; Chelton C. (1993). "Workplace field testing of a disposable negative pressure half-mask dust respirator (3M 8710)". American Industrial Hygiene Association Journal. 54 (10) (American Industrial Hygiene Association Journal ed.): 576–583. doi:10.1080/15298669391355080.

Myers W.R.; Z. Zhuang; T. Nelson (1996). AIHA & ACGIH (ed.). "Field Performance Measurements of Half-Facepiece Respirators—Foundry Operations". American Industrial Hygiene Association Journal. 57 (2) (American Industrial Hygiene Association Journal ed.): 166–174. doi:10.1080/15428119691015106. PMID 8615325.

Tannahill S.N., R.J. Willey and M.H. Jackson (1990). The British Occupational Hygiene Society (ed.). "Workplace Protection Factors of HSE Approved Negative Pressure Full-Facepiece Dust Respirators During Asbestos Stripping: Preliminary Findings". The Annals of Occupational Hygiene. 34 (6) (The Annals of Occupational Hygiene ed.): 541–552. doi:10.1093/annhyg/34.6.547. PMID 2291579.

Myers W.R., M.J. Peach III (1983). The British Occupational Hygiene Society (ed.). "Performance measurements on a powered air-purifying respirator made during actual field use in a silica bagging operation". The Annals of Occupational Hygiene. 27 (3) (The Annals of Occupational Hygiene ed.): 251–259. doi:10.1093/annhyg/27.3.251. PMID 6314865.

gost.ru

protect.gost.ru

RF state standard ГОСТ Р 12.4.279-2012 СИЗОД. Рекомендации по выбору, применению и техническому обслуживанию. (RPD selection, use and maintenance - in Russian) had no one APF value et all; but the authors of this document (which has been developed by RPD manufacturer and seller - corporation "ROSKHIMZASCHITA" / "Russian Chemical Protection" ), declare the document as a "national version of the EU standard EN 529". And this standard is non-mandatory for employers.

hse.gov.uk

Howie R.M.; Johnstone J.B.G.; Weston P.; Aitken R.J.; Groat S. (1996). "Tables" (PDF). Workplace effectiveness of respiratory protective equipment for asbestos removal work. HSE Contract research report No. 112/1996 (Institute of Occupational Medicine ed.). Edinburgh: Crown. pp. 73, 75, 77. ISBN 978-0-7176-1201-7.

nih.gov

pubmed.ncbi.nlm.nih.gov

osha.gov

Federal Register vol. 68, No 109 / Friday, June 6, 2003 pp. 34036-34119 Assigned Protection Factors

OSHA standard 29 CFR 1910.134 "Respiratory Protection"

"1910.134(d)(3)(i)(A) Assigned Protection Factors (APFs)". OSHA Standard: 29 Code of Federal Register 1910.134 "Respiratory Protection". Personal Protective Equipment. Occupational Safety and Health Administration (OSHA). 2011. Retrieved 4 June 2018.

worldcat.org

search.worldcat.org

Hack, Alan; Fairchild, Chack; Scaggs, Barbara (1982). "the forum...". American Industrial Hygiene Association Journal. 43 (12): A14. ISSN 1542-8117.

Dupraz, Carol (1983). "The Forum". American Industrial Hygiene Association Journal. 44 (3): B24–B25. ISSN 1542-8117.

Myers, Warren; Lenhart, Steven; Campbell, Donald; Provost, Glendel (1983). "The Forum". American Industrial Hygiene Association Journal. 44 (3): B25–B26. ISSN 1542-8117.

Guy, Harry (1985). "Respirator Performance Terminology)". American Industrial Hygiene Association Journal. 46 (5): В22, B24. ISSN 1542-8117.

Dupraz, Carol (1986). "Letter to the Editor". American Industrial Hygiene Association Journal. 47 (1): A12. ISSN 1542-8117.

Myers, Warren; Michael J. Peach III; K. Cutright; W. Iskander (1986). "Field Test of Powered Air-Purifying Respirators at a Battery Manufacturing Facility". Journal of the International Society for Respiratory Protection. 4 (1): 62–89. ISSN 0892-6298.

"Critical Issues Conference On In-Facepiece Sampling". Journal of the International Society for Respiratory Protection. 6 (1): 25. 1988. ISSN 0892-6298.

Myers W. R.; Michael J. Peach III; K. Cutright; W. Iskander (1986). "Field Test of Powered Air-Purifying Respirators at a Battery Manufacturing Facility". Journal of the International Society for Respiratory Protection. 4 (1): 62–89. ISSN 0892-6298.

Respirator assigned protection factors (English Wikipedia)

bsigroup.com

shop.bsigroup.com

cdc.gov

doi.org

gost.ru

protect.gost.ru

hse.gov.uk

isrp.com

kikakurui.com

nih.gov

pubmed.ncbi.nlm.nih.gov

nlm.gov

remm.nlm.gov

ohsonline.com

osha.gov

scc.ca

tandfonline.com

toxreview.ru

en.toxreview.ru

wikimedia.org

upload.wikimedia.org

worldcat.org

search.worldcat.org