Robocasting (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Robocasting" in English language version.

refsWebsite

Global rank English rank

18doi.org

2^nd place

10worldcat.org

5^th place

9semanticscholar.org

11^th place

8^th place

7nih.gov

4^th place

4harvard.edu

18^th place

17^th place

2patents.google.com

1,182^nd place

725^th place

2wiley.com

222^nd place

297^th place

1handle.net

102^nd place

76^th place

1sciencedirect.com

149^th place

178^th place

doi.org

Terminology for Additive Manufacturing - General Principles - Terminology, West Conshohocken, PA: ASTM International, doi:10.1520/isoastm52900-15
Feilden, Ezra (2016). "Robocasting of structural ceramic parts with hydrogel inks". Journal of the European Ceramic Society. 36 (10): 2525–2533. doi:10.1016/j.jeurceramsoc.2016.03.001. hdl:10044/1/29973.
Stuecker, J (2004). "Advanced Support Structures for Enhanced Catalytic Activity". Industrial & Engineering Chemistry Research. 43 (1): 51–55. doi:10.1021/ie030291v.
Xu, Mingjie; Gratson, Gregory M.; Duoss, Eric B.; Shepherd, Robert F.; Lewis, Jennifer A. (2006). "Biomimetic silicification of 3D polyamine-rich scaffolds assembled by direct ink writing". Soft Matter. 2 (3): 205–209. Bibcode:2006SMat....2..205X. doi:10.1039/b517278k. ISSN 1744-683X. PMID 32646146.
Smay, James E.; Cesarano, Joseph; Lewis, Jennifer A. (2002). "Colloidal Inks for Directed Assembly of 3-D Periodic Structures". Langmuir. 18 (14): 5429–5437. doi:10.1021/la0257135. ISSN 0743-7463.
Kenel, C.; Geisendorfer, N. R.; Shah, R. N.; Dunand, D. C. (2021-01-01). "Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with salt space-holders". Additive Manufacturing. 37: 101637. doi:10.1016/j.addma.2020.101637. ISSN 2214-8604. S2CID 224925788.
Baniasadi, Hossein; Ajdary, Rubina; Trifol, Jon; Rojas, Orlando J.; Seppälä, Jukka (2021-08-15). "Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels". Carbohydrate Polymers. 266: 118114. doi:10.1016/j.carbpol.2021.118114. ISSN 0144-8617. PMID 34044931. S2CID 235229991.
Compton, Brett G.; Wilt, Jackson K.; Kemp, James W.; Hmeidat, Nadim S.; Maness, Samantha R.; Edmond, Mark; Wilcenski, Steve; Taylor, Jason (2021-04-01). "Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs". MRS Communications. 11 (2): 100–105. doi:10.1557/s43579-020-00005-9. ISSN 2159-6867. S2CID 234142021.
Hmeidat, Nadim S.; Elkins, Daniel S.; Peter, Hutchison R.; Kumar, Vipin; Compton, Brett G. (2021-10-15). "Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing". Composites Part B: Engineering. 223: 109122. doi:10.1016/j.compositesb.2021.109122. ISSN 1359-8368.
Hmeidat, Nadim S.; Pack, Robert C.; Talley, Samantha J.; Moore, Robert B.; Compton, Brett G. (2020-08-01). "Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing". Additive Manufacturing. 34: 101385. doi:10.1016/j.addma.2020.101385. ISSN 2214-8604. S2CID 225351017.
Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni; Pasetto, Marco; Gardin, Chiara; Ferroni, Letizia; Zavan, Barbara; Biasetto, Lisa (2019-10-01). "Direct ink writing of porous titanium (Ti6Al4V) lattice structures". Materials Science and Engineering: C. 103: 109794. doi:10.1016/j.msec.2019.109794. ISSN 0928-4931. PMID 31349412. S2CID 182555527.
Franchin, Giorgia; Wahl, Larissa; Colombo, Paolo (October 2017). "Direct ink writing of ceramic matrix composite structures". Journal of the American Ceramic Society. 100 (10): 4397–4401. doi:10.1111/jace.15045.
Compton, Brett G.; Lewis, Jennifer A. (2014). "3D-Printing of Lightweight Cellular Composites". Advanced Materials. 26 (34): 5930–5935. Bibcode:2014AdM....26.5930C. doi:10.1002/adma.201401804. PMID 24942232. S2CID 7816025.
Hmeidat, Nadim S.; Brown, Bailey; Jia, Xiu; Vermaak, Natasha; Compton, Brett (2021-01-01). "Effects of infill patterns on the strength and stiffness of 3D printed topologically optimized geometries". Rapid Prototyping Journal. 27 (8): 1467–1479. doi:10.1108/RPJ-11-2019-0290. ISSN 1355-2546. S2CID 238782971.
Lewis, Jennifer (2006). "Direct Ink Writing of 3D Functional Materials". Advanced Functional Materials. 16 (17): 2193–2204. doi:10.1002/adfm.200600434. S2CID 28385714.
Feilden, Ezra; Ferraro, Claudio; Zhang, Qinghua; García-Tuñón, Esther; D’Elia, Eleonora; Giuliani, Finn; Vandeperre, Luc; Saiz, Eduardo (2017). "3D Printing Bioinspired Ceramic Composites". Scientific Reports. 7 (1): 13759. Bibcode:2017NatSR...713759F. doi:10.1038/s41598-017-14236-9. ISSN 2045-2322. PMC 5653810. PMID 29062036.
Miranda, P (2008). "Mechanical properties of calcium phosphate scaffolds fabricated by robocasting". Journal of Biomedical Materials Research Part A. 85 (1): 218–227. doi:10.1002/jbm.a.31587. PMID 17688280.
Kuhn, M.; Napporn, T.; Meunier, M.; Vengallatore, S.; Therriault, D. (2008). "Direct-write microfabrication of single-chamber micro solid oxide fuel cells". Journal of Micromechanics and Microengineering. 18 (1): 015005. Bibcode:2008JMiMi..18a5005K. doi:10.1088/0960-1317/18/1/015005. S2CID 55927188.

handle.net

hdl.handle.net

Feilden, Ezra (2016). "Robocasting of structural ceramic parts with hydrogel inks". Journal of the European Ceramic Society. 36 (10): 2525–2533. doi:10.1016/j.jeurceramsoc.2016.03.001. hdl:10044/1/29973.

harvard.edu

ui.adsabs.harvard.edu

Xu, Mingjie; Gratson, Gregory M.; Duoss, Eric B.; Shepherd, Robert F.; Lewis, Jennifer A. (2006). "Biomimetic silicification of 3D polyamine-rich scaffolds assembled by direct ink writing". Soft Matter. 2 (3): 205–209. Bibcode:2006SMat....2..205X. doi:10.1039/b517278k. ISSN 1744-683X. PMID 32646146.
Compton, Brett G.; Lewis, Jennifer A. (2014). "3D-Printing of Lightweight Cellular Composites". Advanced Materials. 26 (34): 5930–5935. Bibcode:2014AdM....26.5930C. doi:10.1002/adma.201401804. PMID 24942232. S2CID 7816025.
Feilden, Ezra; Ferraro, Claudio; Zhang, Qinghua; García-Tuñón, Esther; D’Elia, Eleonora; Giuliani, Finn; Vandeperre, Luc; Saiz, Eduardo (2017). "3D Printing Bioinspired Ceramic Composites". Scientific Reports. 7 (1): 13759. Bibcode:2017NatSR...713759F. doi:10.1038/s41598-017-14236-9. ISSN 2045-2322. PMC 5653810. PMID 29062036.
Kuhn, M.; Napporn, T.; Meunier, M.; Vengallatore, S.; Therriault, D. (2008). "Direct-write microfabrication of single-chamber micro solid oxide fuel cells". Journal of Micromechanics and Microengineering. 18 (1): 015005. Bibcode:2008JMiMi..18a5005K. doi:10.1088/0960-1317/18/1/015005. S2CID 55927188.

nih.gov

pubmed.ncbi.nlm.nih.gov

Xu, Mingjie; Gratson, Gregory M.; Duoss, Eric B.; Shepherd, Robert F.; Lewis, Jennifer A. (2006). "Biomimetic silicification of 3D polyamine-rich scaffolds assembled by direct ink writing". Soft Matter. 2 (3): 205–209. Bibcode:2006SMat....2..205X. doi:10.1039/b517278k. ISSN 1744-683X. PMID 32646146.
Baniasadi, Hossein; Ajdary, Rubina; Trifol, Jon; Rojas, Orlando J.; Seppälä, Jukka (2021-08-15). "Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels". Carbohydrate Polymers. 266: 118114. doi:10.1016/j.carbpol.2021.118114. ISSN 0144-8617. PMID 34044931. S2CID 235229991.
Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni; Pasetto, Marco; Gardin, Chiara; Ferroni, Letizia; Zavan, Barbara; Biasetto, Lisa (2019-10-01). "Direct ink writing of porous titanium (Ti6Al4V) lattice structures". Materials Science and Engineering: C. 103: 109794. doi:10.1016/j.msec.2019.109794. ISSN 0928-4931. PMID 31349412. S2CID 182555527.
Compton, Brett G.; Lewis, Jennifer A. (2014). "3D-Printing of Lightweight Cellular Composites". Advanced Materials. 26 (34): 5930–5935. Bibcode:2014AdM....26.5930C. doi:10.1002/adma.201401804. PMID 24942232. S2CID 7816025.
Feilden, Ezra; Ferraro, Claudio; Zhang, Qinghua; García-Tuñón, Esther; D’Elia, Eleonora; Giuliani, Finn; Vandeperre, Luc; Saiz, Eduardo (2017). "3D Printing Bioinspired Ceramic Composites". Scientific Reports. 7 (1): 13759. Bibcode:2017NatSR...713759F. doi:10.1038/s41598-017-14236-9. ISSN 2045-2322. PMC 5653810. PMID 29062036.
Miranda, P (2008). "Mechanical properties of calcium phosphate scaffolds fabricated by robocasting". Journal of Biomedical Materials Research Part A. 85 (1): 218–227. doi:10.1002/jbm.a.31587. PMID 17688280.

ncbi.nlm.nih.gov

Feilden, Ezra; Ferraro, Claudio; Zhang, Qinghua; García-Tuñón, Esther; D’Elia, Eleonora; Giuliani, Finn; Vandeperre, Luc; Saiz, Eduardo (2017). "3D Printing Bioinspired Ceramic Composites". Scientific Reports. 7 (1): 13759. Bibcode:2017NatSR...713759F. doi:10.1038/s41598-017-14236-9. ISSN 2045-2322. PMC 5653810. PMID 29062036.

patents.google.com

US20230121100A1, Compton, Brett Gibson; Kemp, James William & Romberg, Stian Kristov et al., "Preceramic polymer 3d-printing formulation comprising fumed alumina", issued 2023-04-20
US20210047490A1, Compton, Brett Gibson; Maness, Samantha & Pack, Robert, "Low density syntactic foams via material extrusion additive manufacturing", issued 2021-02-18

sciencedirect.com

Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni; Pasetto, Marco; Gardin, Chiara; Ferroni, Letizia; Zavan, Barbara; Biasetto, Lisa (2019-10-01). "Direct ink writing of porous titanium (Ti6Al4V) lattice structures". Materials Science and Engineering: C. 103: 109794. doi:10.1016/j.msec.2019.109794. ISSN 0928-4931. PMID 31349412. S2CID 182555527.

semanticscholar.org

api.semanticscholar.org

Kenel, C.; Geisendorfer, N. R.; Shah, R. N.; Dunand, D. C. (2021-01-01). "Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with salt space-holders". Additive Manufacturing. 37: 101637. doi:10.1016/j.addma.2020.101637. ISSN 2214-8604. S2CID 224925788.
Baniasadi, Hossein; Ajdary, Rubina; Trifol, Jon; Rojas, Orlando J.; Seppälä, Jukka (2021-08-15). "Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels". Carbohydrate Polymers. 266: 118114. doi:10.1016/j.carbpol.2021.118114. ISSN 0144-8617. PMID 34044931. S2CID 235229991.
Compton, Brett G.; Wilt, Jackson K.; Kemp, James W.; Hmeidat, Nadim S.; Maness, Samantha R.; Edmond, Mark; Wilcenski, Steve; Taylor, Jason (2021-04-01). "Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs". MRS Communications. 11 (2): 100–105. doi:10.1557/s43579-020-00005-9. ISSN 2159-6867. S2CID 234142021.
Hmeidat, Nadim S.; Pack, Robert C.; Talley, Samantha J.; Moore, Robert B.; Compton, Brett G. (2020-08-01). "Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing". Additive Manufacturing. 34: 101385. doi:10.1016/j.addma.2020.101385. ISSN 2214-8604. S2CID 225351017.
Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni; Pasetto, Marco; Gardin, Chiara; Ferroni, Letizia; Zavan, Barbara; Biasetto, Lisa (2019-10-01). "Direct ink writing of porous titanium (Ti6Al4V) lattice structures". Materials Science and Engineering: C. 103: 109794. doi:10.1016/j.msec.2019.109794. ISSN 0928-4931. PMID 31349412. S2CID 182555527.
Compton, Brett G.; Lewis, Jennifer A. (2014). "3D-Printing of Lightweight Cellular Composites". Advanced Materials. 26 (34): 5930–5935. Bibcode:2014AdM....26.5930C. doi:10.1002/adma.201401804. PMID 24942232. S2CID 7816025.
Hmeidat, Nadim S.; Brown, Bailey; Jia, Xiu; Vermaak, Natasha; Compton, Brett (2021-01-01). "Effects of infill patterns on the strength and stiffness of 3D printed topologically optimized geometries". Rapid Prototyping Journal. 27 (8): 1467–1479. doi:10.1108/RPJ-11-2019-0290. ISSN 1355-2546. S2CID 238782971.
Lewis, Jennifer (2006). "Direct Ink Writing of 3D Functional Materials". Advanced Functional Materials. 16 (17): 2193–2204. doi:10.1002/adfm.200600434. S2CID 28385714.
Kuhn, M.; Napporn, T.; Meunier, M.; Vengallatore, S.; Therriault, D. (2008). "Direct-write microfabrication of single-chamber micro solid oxide fuel cells". Journal of Micromechanics and Microengineering. 18 (1): 015005. Bibcode:2008JMiMi..18a5005K. doi:10.1088/0960-1317/18/1/015005. S2CID 55927188.

wiley.com

onlinelibrary.wiley.com

Franchin, Giorgia; Wahl, Larissa; Colombo, Paolo (October 2017). "Direct ink writing of ceramic matrix composite structures". Journal of the American Ceramic Society. 100 (10): 4397–4401. doi:10.1111/jace.15045.
Compton, Brett G.; Lewis, Jennifer A. (2014). "3D-Printing of Lightweight Cellular Composites". Advanced Materials. 26 (34): 5930–5935. Bibcode:2014AdM....26.5930C. doi:10.1002/adma.201401804. PMID 24942232. S2CID 7816025.

worldcat.org

Xu, Mingjie; Gratson, Gregory M.; Duoss, Eric B.; Shepherd, Robert F.; Lewis, Jennifer A. (2006). "Biomimetic silicification of 3D polyamine-rich scaffolds assembled by direct ink writing". Soft Matter. 2 (3): 205–209. Bibcode:2006SMat....2..205X. doi:10.1039/b517278k. ISSN 1744-683X. PMID 32646146.
Smay, James E.; Cesarano, Joseph; Lewis, Jennifer A. (2002). "Colloidal Inks for Directed Assembly of 3-D Periodic Structures". Langmuir. 18 (14): 5429–5437. doi:10.1021/la0257135. ISSN 0743-7463.
Kenel, C.; Geisendorfer, N. R.; Shah, R. N.; Dunand, D. C. (2021-01-01). "Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with salt space-holders". Additive Manufacturing. 37: 101637. doi:10.1016/j.addma.2020.101637. ISSN 2214-8604. S2CID 224925788.
Baniasadi, Hossein; Ajdary, Rubina; Trifol, Jon; Rojas, Orlando J.; Seppälä, Jukka (2021-08-15). "Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels". Carbohydrate Polymers. 266: 118114. doi:10.1016/j.carbpol.2021.118114. ISSN 0144-8617. PMID 34044931. S2CID 235229991.
Compton, Brett G.; Wilt, Jackson K.; Kemp, James W.; Hmeidat, Nadim S.; Maness, Samantha R.; Edmond, Mark; Wilcenski, Steve; Taylor, Jason (2021-04-01). "Mechanical and thermal properties of 3D-printed epoxy composites reinforced with boron nitride nanobarbs". MRS Communications. 11 (2): 100–105. doi:10.1557/s43579-020-00005-9. ISSN 2159-6867. S2CID 234142021.
Hmeidat, Nadim S.; Elkins, Daniel S.; Peter, Hutchison R.; Kumar, Vipin; Compton, Brett G. (2021-10-15). "Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing". Composites Part B: Engineering. 223: 109122. doi:10.1016/j.compositesb.2021.109122. ISSN 1359-8368.
Hmeidat, Nadim S.; Pack, Robert C.; Talley, Samantha J.; Moore, Robert B.; Compton, Brett G. (2020-08-01). "Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing". Additive Manufacturing. 34: 101385. doi:10.1016/j.addma.2020.101385. ISSN 2214-8604. S2CID 225351017.
Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni; Pasetto, Marco; Gardin, Chiara; Ferroni, Letizia; Zavan, Barbara; Biasetto, Lisa (2019-10-01). "Direct ink writing of porous titanium (Ti6Al4V) lattice structures". Materials Science and Engineering: C. 103: 109794. doi:10.1016/j.msec.2019.109794. ISSN 0928-4931. PMID 31349412. S2CID 182555527.
Hmeidat, Nadim S.; Brown, Bailey; Jia, Xiu; Vermaak, Natasha; Compton, Brett (2021-01-01). "Effects of infill patterns on the strength and stiffness of 3D printed topologically optimized geometries". Rapid Prototyping Journal. 27 (8): 1467–1479. doi:10.1108/RPJ-11-2019-0290. ISSN 1355-2546. S2CID 238782971.
Feilden, Ezra; Ferraro, Claudio; Zhang, Qinghua; García-Tuñón, Esther; D’Elia, Eleonora; Giuliani, Finn; Vandeperre, Luc; Saiz, Eduardo (2017). "3D Printing Bioinspired Ceramic Composites". Scientific Reports. 7 (1): 13759. Bibcode:2017NatSR...713759F. doi:10.1038/s41598-017-14236-9. ISSN 2045-2322. PMC 5653810. PMID 29062036.