Rubber toughening (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Rubber toughening" in English language version.

refsWebsite

Global rank English rank

24doi.org

2^nd place

8semanticscholar.org

11^th place

8^th place

5worldcat.org

5^th place

5harvard.edu

18^th place

17^th place

2nih.gov

4^th place

2sciencedirect.com

149^th place

178^th place

1acs.org

1,248^th place

1,104^th place

1wiley.com

222^nd place

297^th place

1cjps.org

low place

1postech.ac.kr

low place

acs.org

pubs.acs.org

Zeidi, Mahdi; Park, Chul B.; Kim, Chun Il (2023). "Synergism effect between nanofibrillation and interface tuning on the stiffness-toughness balance of rubber-toughened polymer nanocomposites: a multiscale analysis". ACS Applied Materials and Interfaces. 15 (20): 24948–24967. doi:10.1021/acsami.3c04017. PMID 37172315. S2CID 258659550.

cjps.org

"Special Effect of Ultra-Fine Rubber Particles on Plastic Toughening^*". Chinese Journal of Polymer Science (in Simplified Chinese). 20 (2). 2002.

doi.org

Bucknall, C. B. (1988). "The micromechanics of rubber toughening". Makromolekulare Chemie. Macromolecular Symposia. 20–21 (1): 425–439. doi:10.1002/masy.19880200145.
Zeidi, Mahdi; Kim, Chun IL; Park, Chul B. (2021). "The role of interface on the toughening and failure mechanisms of thermoplastic nanocomposites reinforced with nanofibrillated rubbers". Nanoscale. 13 (47): 20248–20280. doi:10.1039/D1NR07363J. ISSN 2040-3372. PMID 34851346. S2CID 244288401.
Zeidi, Mahdi; Park, Chul B.; Kim, Chun Il (2023). "Synergism effect between nanofibrillation and interface tuning on the stiffness-toughness balance of rubber-toughened polymer nanocomposites: a multiscale analysis". ACS Applied Materials and Interfaces. 15 (20): 24948–24967. doi:10.1021/acsami.3c04017. PMID 37172315. S2CID 258659550.
Fowler, M. W.; Baker, W. E. (1988). "Rubber toughening of polystyrene through reactive blending". Polymer Engineering and Science. 28 (21): 1427–1433. doi:10.1002/pen.760282112.
Liang, J. Z.; Li, R. K. Y. (11 July 2000). "Rubber toughening in polypropylene: A review". Journal of Applied Polymer Science. 77 (2): 409–417. doi:10.1002/(SICI)1097-4628(20000711)77:2<409::AID-APP18>3.0.CO;2-N.
Walker, I.; Collyer, A. A. (2012). "Rubber toughening mechanisms in polymeric materials". Rubber Toughened Engineering Plastics. Springer Netherlands. pp. 29–56. doi:10.1007/978-94-011-1260-4_2. ISBN 9789401045490.
Bucknall, C. B. (1996). "Rubber Toughening of Plastics: Rubber Particle Cavitation and its Consequences" (PDF). Macromol. Symp. 101 (1): 265–271. doi:10.1002/masy.19961010130.
Kubiak, Joshua M.; Yan, Jiajun; Pietrasik, Joanna; Matyjaszewski, Krzysztof (19 May 2017). "Toughening PMMA with fillers containing polymer brushes synthesized via atom transfer radical polymerization (ATRP)". Polymer. 117: 48–53. doi:10.1016/j.polymer.2017.04.012.
Zhang, Jianing; Deng, Shiqiang; Wang, Yulong; Ye, Lin (1 January 2016). "Role of rigid nanoparticles and CTBN rubber in the toughening of epoxies with different cross-linking densities". Composites Part A: Applied Science and Manufacturing. 80: 82–94. doi:10.1016/j.compositesa.2015.10.017.
Lazzeri, A.; Bucknall, C. B. (1 January 1993). "Dilatational bands in rubber-toughened polymers". Journal of Materials Science. 28 (24): 6799–6808. Bibcode:1993JMatS..28.6799L. doi:10.1007/BF00356433. S2CID 137599245.
Bucknall, C. B. (1996). "Rubber Toughening of Plastics: Rubber Particle Cavitation and its Consequences". Macromol. Symp. 101 (1): 265–271. doi:10.1002/masy.19961010130.
Chikhi, N.; Fellahi, S.; Bakar, M. (2002). "Modification of epoxy resin using reactive liquid (ATBN) rubber". European Polymer Journal. 38 (2): 251–264. Bibcode:2002EurPJ..38..251C. doi:10.1016/S0014-3057(01)00194-X.
He, Chaobin; Donald, Athene M.; Butler, Michael F. (1998-01-01). "In-Situ Deformation Studies of Rubber Toughened Poly(methyl methacrylate): Influence of Rubber Particle Concentration and Rubber Cross-Linking Density". Macromolecules. 31 (1): 158–164. Bibcode:1998MaMol..31..158H. doi:10.1021/ma970398s.
Kilwon Cho; Jaeho Yang; Chan Eon Park (1998). "The effect of rubber particle size on toughening behaviour of rubber-modified poly(methyl methacrylate) with different test methods" (PDF). Polymer. 39 (14): 3073–3081. doi:10.1016/S0032-3861(97)10036-2.
Zhou, Hengshi; Xu, Shiai (2014-04-15). "A new method to prepare rubber toughened epoxy with high modulus and high impact strength". Materials Letters. 121: 238–240. Bibcode:2014MatL..121..238Z. doi:10.1016/j.matlet.2014.01.160. ISSN 0167-577X.
Ratna, D (2004). "Rubber Toughened Epoxy". Macromolecular Research. 12 (1): 11–21. doi:10.1007/BF03218989. S2CID 137326399.
Bagheri, R.; Marouf, B. T.; Pearson, R. A. (2009-08-05). "Rubber-Toughened Epoxies: A Critical Review". Polymer Reviews. 49 (3): 201–225. doi:10.1080/15583720903048227. ISSN 1558-3724. S2CID 135532456.
Xu, Shi-Ai; Song, Xiao-Xue (2015), Parameswaranpillai, Jyotishkumar; Hameed, Nishar; Pionteck, Jürgen; Woo, Eamor M. (eds.), "Introduction to Rubber toughened Epoxy Polymers", Handbook of Epoxy Blends, Cham: Springer International Publishing, pp. 1–26, doi:10.1007/978-3-319-18158-5_1-1, ISBN 978-3-319-18158-5, retrieved 2021-05-18
Unnikrishnan, K. P.; Thachil, Eby Thomas (2006-01-01). "Toughening of epoxy resins". Designed Monomers and Polymers. 9 (2): 129–152. doi:10.1163/156855506776382664. S2CID 137802666.
Thomas, Raju; Yumei, Ding; Yuelong, He; Le, Yang; Moldenaers, Paula; Weimin, Yang; Czigany, Tibor; Thomas, Sabu (2008-01-10). "Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber". Polymer. 49 (1): 278–294. doi:10.1016/j.polymer.2007.11.030. ISSN 0032-3861.
Tian, Xiaodong; Geng, Ye; Yin, Dongqing; Zhang, Baolong; Zhang, Yuying (2011-02-01). "Studies on the properties of a thermosetting epoxy modified with chain-extended ureas containing hydroxyl-terminated polybutadiene". Polymer Testing. 30 (1): 16–22. doi:10.1016/j.polymertesting.2010.09.011. ISSN 0142-9418.
Khanarian, G. (December 2000). "Rubber toughened and optically transparent blends of cyclic olefin copolymers". Polymer Engineering & Science. 40 (12): 2590–2601. doi:10.1002/pen.11389.
Zhang, Jinlong; Chen, Hongxiang; Zhou, Yu; Ke, Changmei; Lu, Huizhen (2013). "Compatibility of waste rubber powder/polystyrene blends by the addition of styrene grafted styrene butadiene rubber copolymer: effect on morphology and properties". Polymer Bulletin. 70 (10): 2829–2841. doi:10.1007/s00289-013-0991-3. S2CID 97726799.
Rovere, Juliana; Correa, Carlos Alberto; Grassi, Vinícius Galhard; Pizzol, Marcus Fernando Dal (2008). "Role of the rubber particle and polybutadiene cis content on the toughness of high impact polystyrene". Journal of Materials Science. 43 (3): 952–959. Bibcode:2008JMatS..43..952R. doi:10.1007/s10853-007-2197-2. S2CID 137317741.

harvard.edu

ui.adsabs.harvard.edu

Lazzeri, A.; Bucknall, C. B. (1 January 1993). "Dilatational bands in rubber-toughened polymers". Journal of Materials Science. 28 (24): 6799–6808. Bibcode:1993JMatS..28.6799L. doi:10.1007/BF00356433. S2CID 137599245.
Chikhi, N.; Fellahi, S.; Bakar, M. (2002). "Modification of epoxy resin using reactive liquid (ATBN) rubber". European Polymer Journal. 38 (2): 251–264. Bibcode:2002EurPJ..38..251C. doi:10.1016/S0014-3057(01)00194-X.
He, Chaobin; Donald, Athene M.; Butler, Michael F. (1998-01-01). "In-Situ Deformation Studies of Rubber Toughened Poly(methyl methacrylate): Influence of Rubber Particle Concentration and Rubber Cross-Linking Density". Macromolecules. 31 (1): 158–164. Bibcode:1998MaMol..31..158H. doi:10.1021/ma970398s.
Zhou, Hengshi; Xu, Shiai (2014-04-15). "A new method to prepare rubber toughened epoxy with high modulus and high impact strength". Materials Letters. 121: 238–240. Bibcode:2014MatL..121..238Z. doi:10.1016/j.matlet.2014.01.160. ISSN 0167-577X.
Rovere, Juliana; Correa, Carlos Alberto; Grassi, Vinícius Galhard; Pizzol, Marcus Fernando Dal (2008). "Role of the rubber particle and polybutadiene cis content on the toughness of high impact polystyrene". Journal of Materials Science. 43 (3): 952–959. Bibcode:2008JMatS..43..952R. doi:10.1007/s10853-007-2197-2. S2CID 137317741.

nih.gov

pubmed.ncbi.nlm.nih.gov

Zeidi, Mahdi; Kim, Chun IL; Park, Chul B. (2021). "The role of interface on the toughening and failure mechanisms of thermoplastic nanocomposites reinforced with nanofibrillated rubbers". Nanoscale. 13 (47): 20248–20280. doi:10.1039/D1NR07363J. ISSN 2040-3372. PMID 34851346. S2CID 244288401.
Zeidi, Mahdi; Park, Chul B.; Kim, Chun Il (2023). "Synergism effect between nanofibrillation and interface tuning on the stiffness-toughness balance of rubber-toughened polymer nanocomposites: a multiscale analysis". ACS Applied Materials and Interfaces. 15 (20): 24948–24967. doi:10.1021/acsami.3c04017. PMID 37172315. S2CID 258659550.

postech.ac.kr

crg.postech.ac.kr

Kilwon Cho; Jaeho Yang; Chan Eon Park (1998). "The effect of rubber particle size on toughening behaviour of rubber-modified poly(methyl methacrylate) with different test methods" (PDF). Polymer. 39 (14): 3073–3081. doi:10.1016/S0032-3861(97)10036-2.

sciencedirect.com

Thomas, Raju; Yumei, Ding; Yuelong, He; Le, Yang; Moldenaers, Paula; Weimin, Yang; Czigany, Tibor; Thomas, Sabu (2008-01-10). "Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber". Polymer. 49 (1): 278–294. doi:10.1016/j.polymer.2007.11.030. ISSN 0032-3861.
Tian, Xiaodong; Geng, Ye; Yin, Dongqing; Zhang, Baolong; Zhang, Yuying (2011-02-01). "Studies on the properties of a thermosetting epoxy modified with chain-extended ureas containing hydroxyl-terminated polybutadiene". Polymer Testing. 30 (1): 16–22. doi:10.1016/j.polymertesting.2010.09.011. ISSN 0142-9418.

semanticscholar.org

api.semanticscholar.org

Zeidi, Mahdi; Kim, Chun IL; Park, Chul B. (2021). "The role of interface on the toughening and failure mechanisms of thermoplastic nanocomposites reinforced with nanofibrillated rubbers". Nanoscale. 13 (47): 20248–20280. doi:10.1039/D1NR07363J. ISSN 2040-3372. PMID 34851346. S2CID 244288401.
Zeidi, Mahdi; Park, Chul B.; Kim, Chun Il (2023). "Synergism effect between nanofibrillation and interface tuning on the stiffness-toughness balance of rubber-toughened polymer nanocomposites: a multiscale analysis". ACS Applied Materials and Interfaces. 15 (20): 24948–24967. doi:10.1021/acsami.3c04017. PMID 37172315. S2CID 258659550.
Lazzeri, A.; Bucknall, C. B. (1 January 1993). "Dilatational bands in rubber-toughened polymers". Journal of Materials Science. 28 (24): 6799–6808. Bibcode:1993JMatS..28.6799L. doi:10.1007/BF00356433. S2CID 137599245.
Ratna, D (2004). "Rubber Toughened Epoxy". Macromolecular Research. 12 (1): 11–21. doi:10.1007/BF03218989. S2CID 137326399.
Bagheri, R.; Marouf, B. T.; Pearson, R. A. (2009-08-05). "Rubber-Toughened Epoxies: A Critical Review". Polymer Reviews. 49 (3): 201–225. doi:10.1080/15583720903048227. ISSN 1558-3724. S2CID 135532456.
Unnikrishnan, K. P.; Thachil, Eby Thomas (2006-01-01). "Toughening of epoxy resins". Designed Monomers and Polymers. 9 (2): 129–152. doi:10.1163/156855506776382664. S2CID 137802666.
Zhang, Jinlong; Chen, Hongxiang; Zhou, Yu; Ke, Changmei; Lu, Huizhen (2013). "Compatibility of waste rubber powder/polystyrene blends by the addition of styrene grafted styrene butadiene rubber copolymer: effect on morphology and properties". Polymer Bulletin. 70 (10): 2829–2841. doi:10.1007/s00289-013-0991-3. S2CID 97726799.
Rovere, Juliana; Correa, Carlos Alberto; Grassi, Vinícius Galhard; Pizzol, Marcus Fernando Dal (2008). "Role of the rubber particle and polybutadiene cis content on the toughness of high impact polystyrene". Journal of Materials Science. 43 (3): 952–959. Bibcode:2008JMatS..43..952R. doi:10.1007/s10853-007-2197-2. S2CID 137317741.

wiley.com

onlinelibrary.wiley.com

Bucknall, C. B. (1996). "Rubber Toughening of Plastics: Rubber Particle Cavitation and its Consequences" (PDF). Macromol. Symp. 101 (1): 265–271. doi:10.1002/masy.19961010130.

worldcat.org

search.worldcat.org

Zeidi, Mahdi; Kim, Chun IL; Park, Chul B. (2021). "The role of interface on the toughening and failure mechanisms of thermoplastic nanocomposites reinforced with nanofibrillated rubbers". Nanoscale. 13 (47): 20248–20280. doi:10.1039/D1NR07363J. ISSN 2040-3372. PMID 34851346. S2CID 244288401.
Zhou, Hengshi; Xu, Shiai (2014-04-15). "A new method to prepare rubber toughened epoxy with high modulus and high impact strength". Materials Letters. 121: 238–240. Bibcode:2014MatL..121..238Z. doi:10.1016/j.matlet.2014.01.160. ISSN 0167-577X.
Bagheri, R.; Marouf, B. T.; Pearson, R. A. (2009-08-05). "Rubber-Toughened Epoxies: A Critical Review". Polymer Reviews. 49 (3): 201–225. doi:10.1080/15583720903048227. ISSN 1558-3724. S2CID 135532456.
Thomas, Raju; Yumei, Ding; Yuelong, He; Le, Yang; Moldenaers, Paula; Weimin, Yang; Czigany, Tibor; Thomas, Sabu (2008-01-10). "Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber". Polymer. 49 (1): 278–294. doi:10.1016/j.polymer.2007.11.030. ISSN 0032-3861.
Tian, Xiaodong; Geng, Ye; Yin, Dongqing; Zhang, Baolong; Zhang, Yuying (2011-02-01). "Studies on the properties of a thermosetting epoxy modified with chain-extended ureas containing hydroxyl-terminated polybutadiene". Polymer Testing. 30 (1): 16–22. doi:10.1016/j.polymertesting.2010.09.011. ISSN 0142-9418.