Superalloy (English Wikipedia)

Analysis of information sources in references of the Wikipedia article "Superalloy" in English language version.

refsWebsite

Global rank English rank

58doi.org

2^nd place

22harvard.edu

18^th place

17^th place

12semanticscholar.org

11^th place

8^th place

6worldcat.org

5^th place

3nih.gov

4^th place

2cam.ac.uk

670^th place

480^th place

2osti.gov

2,036^th place

1,254^th place

2sciencedirect.com

149^th place

178^th place

2psu.edu

207^th place

136^th place

1asminternational.org

low place

1ius.edu.ba

low place

1tms.org

low place

1cobaltinstitute.org

low place

1arxiv.org

69^th place

59^th place

1researchgate.net

120^th place

125^th place

1dtic.mil

833^rd place

567^th place

1elsevier.com

610^th place

704^th place

1doitpoms.ac.uk

low place

1pim-international.com

low place

1web.archive.org

1^st place

1virginia.edu

1,041^st place

733^rd place

1uscti.com

low place

1newatlas.com

5,636^th place

3,692^nd place

arxiv.org

Nyshadham, Chandramouli; Oses, Corey; Hansen, Jacob E.; Takeuchi, Ichiro; Curtarolo, Stefano; Hart, Gus L.W. (January 2017). "A computational high-throughput search for new ternary superalloys". Acta Materialia. 122: 438–447. arXiv:1603.05967. Bibcode:2017AcMat.122..438N. doi:10.1016/j.actamat.2016.09.017. S2CID 11222811.

asminternational.org

Giamei, Anthony (September 2013). "Development of Single Crystal Superalloys: A Brief History". Advanced Materials & Processes: 26–30 – via asminternational.

cam.ac.uk

phase-trans.msm.cam.ac.uk

"Review: precipitation in austenitic stainless steels". www.phase-trans.msm.cam.ac.uk. Retrieved 2 March 2018.
"Nickel based superalloy: dislocation structure". www.phase-trans.msm.cam.ac.uk. Retrieved 13 May 2024.

cobaltinstitute.org

Institute, Cobalt (14 February 2018). "Superalloys". www.cobaltinstitute.org. Retrieved 10 December 2019.

doi.org

Sims, C.T. (1984). "A History of Superalloy Metallurgy for Superalloy Metallurgists". Superalloys 1984 (Fifth International Symposium). pp. 399–419. doi:10.7449/1984/Superalloys_1984_399_419.
Carter, Tim J (April 2005). "Common failures in gas turbine blades". Engineering Failure Analysis. 12 (2): 237–247. doi:10.1016/j.engfailanal.2004.07.004.
Klein, L.; Shen, Y.; Killian, M. S.; Virtanen, S. (2011). "Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ'-strengthened Co-base superalloys". Corrosion Science. 53 (9): 2713–720. Bibcode:2011Corro..53.2713K. doi:10.1016/j.corsci.2011.04.020.
Shinagawa, K.; Omori, Toshihiro; Oikawa, Katsunari; Kainuma, Ryosuke; Ishida, Kiyohito (2009). "Ductility Enhancement by Boron Addition in Co–Al–W High-temperature Alloys". Scripta Materialia. 61 (6): 612–15. doi:10.1016/j.scriptamat.2009.05.037.
Akca, Enes; Gursel, Ali (2015). "A Review on Superalloys and IN718 Nickel-Based INCONEL Superalloy". Periodicals of Engineering and Natural Sciences. 3 (1): 15–27. doi:10.21533/pen.v3i1.43 – via pen.ius.edu.ba.
Belan, Juraj (2016). "GCP and TCP Phases Presented in Nickel-base Superalloys". Materials Today: Proceedings. 3 (4): 936–941. doi:10.1016/j.matpr.2016.03.024.
Rae, C.M.F.; Karunaratne, M.S.A.; Small, C.J.; Broomfield, R.W.; Jones, C.N.; Reed, R.C. (2000). "Topologically Close Packed Phases in an Experimental Rhenium-Containing Single Crystal Superalloy". Superalloys 2000 (Ninth International Symposium). pp. 767–776. doi:10.7449/2000/Superalloys_2000_767_776. ISBN 0-87339-477-1.
Sabol, G. P.; Stickler, R. (1969). "Microstructure of Nickel-Based Superalloys". Physica Status Solidi B. 35 (1): 11–52. Bibcode:1969PSSBR..35...11S. doi:10.1002/pssb.19690350102.
Doi, M.; Miki, D.; Moritani, T.; Kozakai, T. (2004). "Gamma/Gamma-Prime Microstructure Formed by Phased Separation of Gamma-Prime Precipitates in a Ni-Al-Ti Alloy". Superalloys 2004 (Tenth International Symposium). pp. 109–114. doi:10.7449/2004/Superalloys_2004_109_114. ISBN 0-87339-576-X.
Sato, J.; Omori, T.; Oikawa, K.; Ohnuma, I.; Kainuma, R.; Ishida, K. (2006). "Cobalt-Base High-Temperature Alloys". Science. 312 (5770): 90–91. Bibcode:2006Sci...312...90S. doi:10.1126/science.1121738. PMID 16601187. S2CID 23877638.
Makineni, S. K.; Nithin, B.; Chattopadhyay, K. (March 2015). "A new tungsten-free γ–γ' Co–Al–Mo–Nb-based superalloy". Scripta Materialia. 98: 36–39. doi:10.1016/j.scriptamat.2014.11.009.
Nyshadham, Chandramouli; Oses, Corey; Hansen, Jacob E.; Takeuchi, Ichiro; Curtarolo, Stefano; Hart, Gus L.W. (January 2017). "A computational high-throughput search for new ternary superalloys". Acta Materialia. 122: 438–447. arXiv:1603.05967. Bibcode:2017AcMat.122..438N. doi:10.1016/j.actamat.2016.09.017. S2CID 11222811.
Reyes Tirado, Fernando L.; Perrin Toinin, Jacques; Dunand, David C. (June 2018). "γ+γ' microstructures in the Co-Ta-V and Co-Nb-V ternary systems". Acta Materialia. 151: 137–148. Bibcode:2018AcMat.151..137R. doi:10.1016/j.actamat.2018.03.057.
Cui, C (2006). "A New Co-Base Superalloy Strengthened by γ' Phase". Materials Transactions. 47 (8): 2099–2102. doi:10.2320/matertrans.47.2099.
Coutsouradis, D.; Davin, A.; Lamberigts, M. (April 1987). "Cobalt-based superalloys for applications in gas turbines". Materials Science and Engineering. 88: 11–19. doi:10.1016/0025-5416(87)90061-9.
Suzuki, A.; Pollock, Tresa M. (2008). "High-temperature strength and deformation of γ/γ' two-phase Co–Al–W-base alloys". Acta Materialia. 56 (6): 1288–97. Bibcode:2008AcMat..56.1288S. doi:10.1016/j.actamat.2007.11.014.
Brady, M. P.; Yamamoto, Y.; Santella, M. L.; Maziasz, P. J.; Pint, B. A.; Liu, C. T.; Lu, Z. P.; Bei, H. (July 2008). "The development of alumina-forming austenitic stainless steels for high-temperature structural use". JOM. 60 (7): 12–18. Bibcode:2008JOM....60g..12B. doi:10.1007/s11837-008-0083-2. S2CID 137354503.
Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer III, H. M.; Leonard, D. N. (November 2016). "Development of Cast Alumina-Forming Austenitic Stainless Steels". JOM. 68 (11): 2803–2810. Bibcode:2016JOM....68k2803M. doi:10.1007/s11837-016-2094-8. OSTI 1362187. S2CID 137160315.
Ru, Yi; Li, Shusuo; Zhou, Jian; Pei, Yanling; Wang, Hui; Gong, Shengkai; Xu, Huibin (11 August 2016). "Dislocation network with pair-coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy". Scientific Reports. 6 (1): 29941. doi:10.1038/srep29941. ISSN 2045-2322. PMC 4980694. PMID 27511822.
Eggeler, G.; Dlouhy, A. (1 October 1997). "On the formation of 〈010〉-dislocations in the γ′-phase of superalloy single crystals during high temperature low stress creep". Acta Materialia. 45 (10): 4251–4262. doi:10.1016/S1359-6454(97)00084-0. ISSN 1359-6454.
León-Cázares, F.D.; Schlütter, R.; Monni, F.; Hardy, M.C.; Rae, C.M.F. (December 2022). "Nucleation of superlattice intrinsic stacking faults via cross-slip in nickel-based superalloys". Acta Materialia. 241: 118372. Bibcode:2022AcMat.24118372L. doi:10.1016/j.actamat.2022.118372. ISSN 1359-6454.
Dodaran, M.; Ettefagh, A. Hemmasian; Guo, S. M.; Khonsari, M. M.; Meng, W. J.; Shamsaei, N.; Shao, S. (1 February 2020). "Effect of alloying elements on the γ' antiphase boundary energy in Ni-base superalloys". Intermetallics. 117: 106670. doi:10.1016/j.intermet.2019.106670. ISSN 0966-9795.
Mayr, C.; Eggeler, G.; Dlouhy, A. (March 1996). "Analysis of dislocation structures after double shear creep deformation of CMSX6-superalloy single crystals at temperatures above 1000 °C". Materials Science and Engineering: A. 207 (1): 51–63. doi:10.1016/0921-5093(96)80002-5. ISSN 0921-5093.
Chen, J. Y.; Feng, Q.; Sun, Z. Q. (October 2010). "Topologically close-packed phase promotion in a Ru-containing single crystal superalloy". Scripta Materialia. 63 (8): 795–798. doi:10.1016/j.scriptamat.2010.06.019.
Wahl, Jacqueline; Harris, Ken (2014). "New single crystal superalloys – overview and update". MATEC Web of Conferences. 14: 17002. doi:10.1051/matecconf/20141417002. S2CID 55396795.
Matan, N.; Cox, D. C.; Carter, P.; Rist, M. A.; Rae, C. M. F.; Reed, R. C. (1999). "Creep of CMSX-4 superalloy single crystals: effects of misorientation and temperature". Acta Materialia. 47 (5): 1549–1563. Bibcode:1999AcMat..47.1549M. doi:10.1016/s1359-6454(99)00029-4.
Nabarro, Frank R. N. (1996). "Rafting in Superalloys". Metallurgical and Materials Transactions A. 27 (3): 513–530. Bibcode:1996MMTA...27..513N. doi:10.1007/BF02648942. S2CID 137172614.
Reed, R. C.; Matan, N.; Cox, D. C.; Rist, M. A.; Rae, C. M. F. (1999). "Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature". Acta Materialia. 47 (12): 3367–3381. Bibcode:1999AcMat..47.3367R. doi:10.1016/S1359-6454(99)00217-7.
Pettit, F.S.; Meier, G.H. (1984). "Oxidation and Hot Corrosion of Superalloys". Superalloys 1984 (Fifth International Symposium). pp. 651–687. doi:10.7449/1984/Superalloys_1984_651_687.
Klein, L.; Bauer, S.; Neumeier, S.; Göken, M.; Virtanan, S. (2011). "High temperature oxidation of γ/γ'-strengthened Co-based superalloys". Corrosion Science. 53 (5): 2027–2034. Bibcode:2011Corro..53.2027K. doi:10.1016/j.corsci.2011.02.033.
Tian, Sugui; Zhang, Jinghua; Xu, Yongbo; Hu, Zhuangqi; Yang, Hongcai; Wu, Xin (1 December 2001). "Features and effect factors of creep of single-crystal nickel-base superalloys". Metallurgical and Materials Transactions A. 32 (12): 2947–2957. doi:10.1007/s11661-001-0169-8. ISSN 1543-1940.
Xia, Wanshun; Zhao, Xinbao; Yue, Liang; Zhang, Ze (April 2020). "Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review". Journal of Alloys and Compounds. 819: 152954. doi:10.1016/j.jallcom.2019.152954.
Atkinson, H. V.; Davies, S. (December 2000). "Fundamental aspects of hot isostatic pressing: An overview". Metallurgical and Materials Transactions A. 31 (12): 2981–3000. Bibcode:2000MMTA...31.2981A. doi:10.1007/s11661-000-0078-2. S2CID 137660703.
Gu, D D; Meiners, W; Wissenbach, K; Poprawe, R (May 2012). "Laser additive manufacturing of metallic components: materials, processes and mechanisms". International Materials Reviews. 57 (3): 133–164. Bibcode:2012IMRv...57..133G. doi:10.1179/1743280411Y.0000000014. S2CID 137144519.
Graybill, Benjamin; Li, Ming; Malawey, David; Ma, Chao; Alvarado-Orozco, Juan-Manuel; Martinez-Franco, Enrique (18 June 2018). "Additive Manufacturing of Nickel-Based Superalloys". Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing. College Station, Texas, USA: American Society of Mechanical Engineers. doi:10.1115/MSEC2018-6666. ISBN 978-0-7918-5135-7. S2CID 139639438.
Boone, D. H. (1986). "Physical vapour deposition processes". Materials Science and Technology. 2 (3): 220–224. Bibcode:1986MatST...2..220B. doi:10.1179/mst.1986.2.3.220.
Clarke, David R. (January 2003). "Materials selection guidelines for low thermal conductivity thermal barrier coatings". Surface and Coatings Technology. 163–164: 67–74. CiteSeerX 10.1.1.457.1304. doi:10.1016/S0257-8972(02)00593-5.
Warnes, Bruce Michael (January 2003). "Improved aluminide/MCrAlX coating systems for super alloys using CVD low activity aluminizing". Surface and Coatings Technology. 163–164: 106–111. doi:10.1016/S0257-8972(02)00602-3.
Tawancy, H.M.; Abbas, N.M.; Bennett, A. (December 1994). "Role of Y during high temperature oxidation of an M-Cr-Al-Y coating on an Ni-base superalloy". Surface and Coatings Technology. 68–69: 10–16. doi:10.1016/0257-8972(94)90130-9.
D. Chuanxian; H. Bingtang; L. Huiling (24 August 1984). "Plasma-sprayed wear-resistant ceramic and cermet coating materials". Thin Solid Films. 118 (4): 485–493. Bibcode:1984TSF...118..485C. doi:10.1016/0040-6090(84)90277-3.
Kawahara, Yuuzou (January 1997). "Development and application of high-temperature corrosion-resistant materials and coatings for advanced waste-to-energy plants". Materials at High Temperatures. 14 (3): 261–268. Bibcode:1997MaHT...14..261K. doi:10.1080/09603409.1997.11689552.
Longa, Y.; Takemoto, M. (July 1992). "High-Temperature Corrosion of Laser-Glazed Alloys in Na 2 SO 4 -V 2 O 5". Corrosion. 48 (7): 599–607. doi:10.5006/1.3315978.
Niranatlumpong, P.; Ponton, C. B.; Evans, H. E. (2000). "The Failure of Protective Oxides on Plasma-Sprayed NiCrAlY Overlay Coatings". Oxidation of Metals. 53 (3–4): 241–258. doi:10.1023/A:1004549219013. S2CID 136826569.
Evans, A. G.; Mumm, D. R.; Hutchinson, J. W.; Meier, G. H.; Pettit, F. S. (2001). "Mechanisms controlling the durability of thermal barrier coatings". Progress in Materials Science. 46 (5): 505–553. doi:10.1016/s0079-6425(00)00020-7.
Wright, P. K.; Evans, A. G. (1999). "Mechanisms governing the performance of thermal barrier coatings". Current Opinion in Solid State and Materials Science. 4 (3): 255–265. Bibcode:1999COSSM...4..255W. doi:10.1016/s1359-0286(99)00024-8.
Wright, P. K. (1998). "Influence of cyclic strain on life of a PVD TBC". Materials Science and Engineering. A245 (2): 191–200. doi:10.1016/S0921-5093(97)00850-2.
Pint, B.A. (November 2004). "The role of chemical composition on the oxidation performance of aluminide coatings". Surface and Coatings Technology. 188–189: 71–78. doi:10.1016/j.surfcoat.2004.08.007.
Baufeld, B.; Bartsch, M.; Broz, P.; Schmucker, M. (2004). "Microstructural changes as postmortem temperature indicator in Ni-Co-Cr-Al-Y oxidation protection coatings". Materials Science and Engineering. 384 (1–2): 162–171. doi:10.1016/j.msea.2004.05.052.
Nychka, J.A; Clarke, D.R (September 2001). "Damage quantification in TBCs by photo-stimulated luminescence spectroscopy". Surface and Coatings Technology. 146–147: 110–116. doi:10.1016/S0257-8972(01)01455-4.
Mumm, D. R.; Evans, A. G.; Spitsberg, I. T. (2001). "Characterisation of a cyclic displacement instability for a thermally grown oxide in a thermal barrier coating system". Acta Materialia. 49 (12): 2329–2340. doi:10.1016/s1359-6454(01)00071-4.
Mumm, D. R.; Evans, A. G. (2000). "On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition". Acta Materialia. 48 (8): 1815–1827. Bibcode:2000AcMat..48.1815M. doi:10.1016/s1359-6454(99)00473-5.
Gell, M.; Vaidyanathan, K.; Barber, B.; Cheng, J.; Jordan, E. (1999). "Mechanism of spallation in platinum aluminide/electron beam physical vapor-deposited thermal barrier coatings". Metallurgical and Materials Transactions A. 30 (2): 427–435. Bibcode:1999MMTA...30..427G. doi:10.1007/s11661-999-0332-1. S2CID 137312835.
Evans, A.G.; He, M.Y.; Hutchinson, J.W. (January 2001). "Mechanics-based scaling laws for the durability of thermal barrier coatings". Progress in Materials Science. 46 (3–4): 249–271. doi:10.1016/S0079-6425(00)00007-4.
Schulz, U; Menzebach, M; Leyens, C; Yang, Y.Q (September 2001). "Influence of substrate material on oxidation behavior and cyclic lifetime of EB-PVD TBC systems". Surface and Coatings Technology. 146–147: 117–123. doi:10.1016/S0257-8972(01)01481-5.
Chen, X; Wang, R; Yao, N; Evans, A.G; Hutchinson, J.W; Bruce, R.W (July 2003). "Foreign object damage in a thermal barrier system: mechanisms and simulations". Materials Science and Engineering: A. 352 (1–2): 221–231. doi:10.1016/S0921-5093(02)00905-X.
Walston, W.S. (2004). "Coating and Surface Technologies for Turbine Airfoils". Superalloys 2004 (Tenth International Symposium). pp. 579–588. doi:10.7449/2004/Superalloys_2004_579_588. ISBN 0-87339-576-X.
Mumm, D. R.; Watanabe, M.; Evans, A. G.; Pfaendtner, J. A. (2004). "The influence of test method on failure mechanisms and durability of a thermal barrier system". Acta Materialia. 52 (5): 1123–1131. Bibcode:2004AcMat..52.1123M. CiteSeerX 10.1.1.514.3611. doi:10.1016/j.actamat.2003.10.045.
Brady, M. P.; Muralidharan, G.; Leonard, D. N.; Haynes, J. A.; Weldon, R. G.; England, R. D. (December 2014). "Long-Term Oxidation of Candidate Cast Iron and Stainless Steel Exhaust System Alloys from 650 to 800 °C in Air with Water Vapor". Oxidation of Metals. 82 (5–6): 359–381. doi:10.1007/s11085-014-9496-1. OSTI 1185421. S2CID 136677636.

doitpoms.ac.uk

Cambridge, Department of Materials Science and Metallurgy - University of. "Designing for Creep Resistance - Nickel Based Superalloys". www.doitpoms.ac.uk. Retrieved 13 May 2024.

dtic.mil

apps.dtic.mil

Lund and Wagner. "Oxidation of Nickel- and Cobalt-Base Superalloys"^{[dead link‍]}. DMIC report 214. 1 March 1965. Defense Metals Information Center, Batelle Memorial Institute, Columbus, Ohio.

elsevier.com

linkinghub.elsevier.com

Xia, Wanshun; Zhao, Xinbao; Yue, Liang; Zhang, Ze (April 2020). "Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review". Journal of Alloys and Compounds. 819: 152954. doi:10.1016/j.jallcom.2019.152954.

harvard.edu

ui.adsabs.harvard.edu

Klein, L.; Shen, Y.; Killian, M. S.; Virtanen, S. (2011). "Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ'-strengthened Co-base superalloys". Corrosion Science. 53 (9): 2713–720. Bibcode:2011Corro..53.2713K. doi:10.1016/j.corsci.2011.04.020.
Sabol, G. P.; Stickler, R. (1969). "Microstructure of Nickel-Based Superalloys". Physica Status Solidi B. 35 (1): 11–52. Bibcode:1969PSSBR..35...11S. doi:10.1002/pssb.19690350102.
Sato, J.; Omori, T.; Oikawa, K.; Ohnuma, I.; Kainuma, R.; Ishida, K. (2006). "Cobalt-Base High-Temperature Alloys". Science. 312 (5770): 90–91. Bibcode:2006Sci...312...90S. doi:10.1126/science.1121738. PMID 16601187. S2CID 23877638.
Nyshadham, Chandramouli; Oses, Corey; Hansen, Jacob E.; Takeuchi, Ichiro; Curtarolo, Stefano; Hart, Gus L.W. (January 2017). "A computational high-throughput search for new ternary superalloys". Acta Materialia. 122: 438–447. arXiv:1603.05967. Bibcode:2017AcMat.122..438N. doi:10.1016/j.actamat.2016.09.017. S2CID 11222811.
Reyes Tirado, Fernando L.; Perrin Toinin, Jacques; Dunand, David C. (June 2018). "γ+γ' microstructures in the Co-Ta-V and Co-Nb-V ternary systems". Acta Materialia. 151: 137–148. Bibcode:2018AcMat.151..137R. doi:10.1016/j.actamat.2018.03.057.
Suzuki, A.; Pollock, Tresa M. (2008). "High-temperature strength and deformation of γ/γ' two-phase Co–Al–W-base alloys". Acta Materialia. 56 (6): 1288–97. Bibcode:2008AcMat..56.1288S. doi:10.1016/j.actamat.2007.11.014.
Brady, M. P.; Yamamoto, Y.; Santella, M. L.; Maziasz, P. J.; Pint, B. A.; Liu, C. T.; Lu, Z. P.; Bei, H. (July 2008). "The development of alumina-forming austenitic stainless steels for high-temperature structural use". JOM. 60 (7): 12–18. Bibcode:2008JOM....60g..12B. doi:10.1007/s11837-008-0083-2. S2CID 137354503.
Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer III, H. M.; Leonard, D. N. (November 2016). "Development of Cast Alumina-Forming Austenitic Stainless Steels". JOM. 68 (11): 2803–2810. Bibcode:2016JOM....68k2803M. doi:10.1007/s11837-016-2094-8. OSTI 1362187. S2CID 137160315.
León-Cázares, F.D.; Schlütter, R.; Monni, F.; Hardy, M.C.; Rae, C.M.F. (December 2022). "Nucleation of superlattice intrinsic stacking faults via cross-slip in nickel-based superalloys". Acta Materialia. 241: 118372. Bibcode:2022AcMat.24118372L. doi:10.1016/j.actamat.2022.118372. ISSN 1359-6454.
Matan, N.; Cox, D. C.; Carter, P.; Rist, M. A.; Rae, C. M. F.; Reed, R. C. (1999). "Creep of CMSX-4 superalloy single crystals: effects of misorientation and temperature". Acta Materialia. 47 (5): 1549–1563. Bibcode:1999AcMat..47.1549M. doi:10.1016/s1359-6454(99)00029-4.
Nabarro, Frank R. N. (1996). "Rafting in Superalloys". Metallurgical and Materials Transactions A. 27 (3): 513–530. Bibcode:1996MMTA...27..513N. doi:10.1007/BF02648942. S2CID 137172614.
Reed, R. C.; Matan, N.; Cox, D. C.; Rist, M. A.; Rae, C. M. F. (1999). "Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature". Acta Materialia. 47 (12): 3367–3381. Bibcode:1999AcMat..47.3367R. doi:10.1016/S1359-6454(99)00217-7.
Klein, L.; Bauer, S.; Neumeier, S.; Göken, M.; Virtanan, S. (2011). "High temperature oxidation of γ/γ'-strengthened Co-based superalloys". Corrosion Science. 53 (5): 2027–2034. Bibcode:2011Corro..53.2027K. doi:10.1016/j.corsci.2011.02.033.
Atkinson, H. V.; Davies, S. (December 2000). "Fundamental aspects of hot isostatic pressing: An overview". Metallurgical and Materials Transactions A. 31 (12): 2981–3000. Bibcode:2000MMTA...31.2981A. doi:10.1007/s11661-000-0078-2. S2CID 137660703.
Gu, D D; Meiners, W; Wissenbach, K; Poprawe, R (May 2012). "Laser additive manufacturing of metallic components: materials, processes and mechanisms". International Materials Reviews. 57 (3): 133–164. Bibcode:2012IMRv...57..133G. doi:10.1179/1743280411Y.0000000014. S2CID 137144519.
Boone, D. H. (1986). "Physical vapour deposition processes". Materials Science and Technology. 2 (3): 220–224. Bibcode:1986MatST...2..220B. doi:10.1179/mst.1986.2.3.220.
D. Chuanxian; H. Bingtang; L. Huiling (24 August 1984). "Plasma-sprayed wear-resistant ceramic and cermet coating materials". Thin Solid Films. 118 (4): 485–493. Bibcode:1984TSF...118..485C. doi:10.1016/0040-6090(84)90277-3.
Kawahara, Yuuzou (January 1997). "Development and application of high-temperature corrosion-resistant materials and coatings for advanced waste-to-energy plants". Materials at High Temperatures. 14 (3): 261–268. Bibcode:1997MaHT...14..261K. doi:10.1080/09603409.1997.11689552.
Wright, P. K.; Evans, A. G. (1999). "Mechanisms governing the performance of thermal barrier coatings". Current Opinion in Solid State and Materials Science. 4 (3): 255–265. Bibcode:1999COSSM...4..255W. doi:10.1016/s1359-0286(99)00024-8.
Mumm, D. R.; Evans, A. G. (2000). "On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition". Acta Materialia. 48 (8): 1815–1827. Bibcode:2000AcMat..48.1815M. doi:10.1016/s1359-6454(99)00473-5.
Gell, M.; Vaidyanathan, K.; Barber, B.; Cheng, J.; Jordan, E. (1999). "Mechanism of spallation in platinum aluminide/electron beam physical vapor-deposited thermal barrier coatings". Metallurgical and Materials Transactions A. 30 (2): 427–435. Bibcode:1999MMTA...30..427G. doi:10.1007/s11661-999-0332-1. S2CID 137312835.
Mumm, D. R.; Watanabe, M.; Evans, A. G.; Pfaendtner, J. A. (2004). "The influence of test method on failure mechanisms and durability of a thermal barrier system". Acta Materialia. 52 (5): 1123–1131. Bibcode:2004AcMat..52.1123M. CiteSeerX 10.1.1.514.3611. doi:10.1016/j.actamat.2003.10.045.

ius.edu.ba

pen.ius.edu.ba

Akca, Enes; Gursel, Ali (2015). "A Review on Superalloys and IN718 Nickel-Based INCONEL Superalloy". Periodicals of Engineering and Natural Sciences. 3 (1): 15–27. doi:10.21533/pen.v3i1.43 – via pen.ius.edu.ba.

newatlas.com

Blain, Loz (10 February 2023). "Heat-loving lightweight superalloy promises higher turbine efficiency". New Atlas. Retrieved 12 February 2023.

nih.gov

pubmed.ncbi.nlm.nih.gov

Sato, J.; Omori, T.; Oikawa, K.; Ohnuma, I.; Kainuma, R.; Ishida, K. (2006). "Cobalt-Base High-Temperature Alloys". Science. 312 (5770): 90–91. Bibcode:2006Sci...312...90S. doi:10.1126/science.1121738. PMID 16601187. S2CID 23877638.
Ru, Yi; Li, Shusuo; Zhou, Jian; Pei, Yanling; Wang, Hui; Gong, Shengkai; Xu, Huibin (11 August 2016). "Dislocation network with pair-coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy". Scientific Reports. 6 (1): 29941. doi:10.1038/srep29941. ISSN 2045-2322. PMC 4980694. PMID 27511822.

ncbi.nlm.nih.gov

Ru, Yi; Li, Shusuo; Zhou, Jian; Pei, Yanling; Wang, Hui; Gong, Shengkai; Xu, Huibin (11 August 2016). "Dislocation network with pair-coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy". Scientific Reports. 6 (1): 29941. doi:10.1038/srep29941. ISSN 2045-2322. PMC 4980694. PMID 27511822.

osti.gov

Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer III, H. M.; Leonard, D. N. (November 2016). "Development of Cast Alumina-Forming Austenitic Stainless Steels". JOM. 68 (11): 2803–2810. Bibcode:2016JOM....68k2803M. doi:10.1007/s11837-016-2094-8. OSTI 1362187. S2CID 137160315.
Brady, M. P.; Muralidharan, G.; Leonard, D. N.; Haynes, J. A.; Weldon, R. G.; England, R. D. (December 2014). "Long-Term Oxidation of Candidate Cast Iron and Stainless Steel Exhaust System Alloys from 650 to 800 °C in Air with Water Vapor". Oxidation of Metals. 82 (5–6): 359–381. doi:10.1007/s11085-014-9496-1. OSTI 1185421. S2CID 136677636.

pim-international.com

"PIM International Vol. 7 No. 1 March 2013". Powder Injection Moulding International. Retrieved 1 March 2016.

psu.edu

citeseerx.ist.psu.edu

Clarke, David R. (January 2003). "Materials selection guidelines for low thermal conductivity thermal barrier coatings". Surface and Coatings Technology. 163–164: 67–74. CiteSeerX 10.1.1.457.1304. doi:10.1016/S0257-8972(02)00593-5.
Mumm, D. R.; Watanabe, M.; Evans, A. G.; Pfaendtner, J. A. (2004). "The influence of test method on failure mechanisms and durability of a thermal barrier system". Acta Materialia. 52 (5): 1123–1131. Bibcode:2004AcMat..52.1123M. CiteSeerX 10.1.1.514.3611. doi:10.1016/j.actamat.2003.10.045.

researchgate.net

Bombač, D.; Fazarinc, M.; Kugler, G.; Spajić, S. (2008). "Microstructure development of Nimonic 80A superalloys during hot deformation". Materials and Geoenvironment. 55 (3): 319–328. Retrieved 8 March 2020 – via ResearchGate.

sciencedirect.com

Eggeler, G.; Dlouhy, A. (1 October 1997). "On the formation of 〈010〉-dislocations in the γ′-phase of superalloy single crystals during high temperature low stress creep". Acta Materialia. 45 (10): 4251–4262. doi:10.1016/S1359-6454(97)00084-0. ISSN 1359-6454.
Dodaran, M.; Ettefagh, A. Hemmasian; Guo, S. M.; Khonsari, M. M.; Meng, W. J.; Shamsaei, N.; Shao, S. (1 February 2020). "Effect of alloying elements on the γ' antiphase boundary energy in Ni-base superalloys". Intermetallics. 117: 106670. doi:10.1016/j.intermet.2019.106670. ISSN 0966-9795.

semanticscholar.org

api.semanticscholar.org

Sato, J.; Omori, T.; Oikawa, K.; Ohnuma, I.; Kainuma, R.; Ishida, K. (2006). "Cobalt-Base High-Temperature Alloys". Science. 312 (5770): 90–91. Bibcode:2006Sci...312...90S. doi:10.1126/science.1121738. PMID 16601187. S2CID 23877638.
Nyshadham, Chandramouli; Oses, Corey; Hansen, Jacob E.; Takeuchi, Ichiro; Curtarolo, Stefano; Hart, Gus L.W. (January 2017). "A computational high-throughput search for new ternary superalloys". Acta Materialia. 122: 438–447. arXiv:1603.05967. Bibcode:2017AcMat.122..438N. doi:10.1016/j.actamat.2016.09.017. S2CID 11222811.
Brady, M. P.; Yamamoto, Y.; Santella, M. L.; Maziasz, P. J.; Pint, B. A.; Liu, C. T.; Lu, Z. P.; Bei, H. (July 2008). "The development of alumina-forming austenitic stainless steels for high-temperature structural use". JOM. 60 (7): 12–18. Bibcode:2008JOM....60g..12B. doi:10.1007/s11837-008-0083-2. S2CID 137354503.
Muralidharan, G.; Yamamoto, Y.; Brady, M. P.; Walker, L. R.; Meyer III, H. M.; Leonard, D. N. (November 2016). "Development of Cast Alumina-Forming Austenitic Stainless Steels". JOM. 68 (11): 2803–2810. Bibcode:2016JOM....68k2803M. doi:10.1007/s11837-016-2094-8. OSTI 1362187. S2CID 137160315.
Wahl, Jacqueline; Harris, Ken (2014). "New single crystal superalloys – overview and update". MATEC Web of Conferences. 14: 17002. doi:10.1051/matecconf/20141417002. S2CID 55396795.
Nabarro, Frank R. N. (1996). "Rafting in Superalloys". Metallurgical and Materials Transactions A. 27 (3): 513–530. Bibcode:1996MMTA...27..513N. doi:10.1007/BF02648942. S2CID 137172614.
Atkinson, H. V.; Davies, S. (December 2000). "Fundamental aspects of hot isostatic pressing: An overview". Metallurgical and Materials Transactions A. 31 (12): 2981–3000. Bibcode:2000MMTA...31.2981A. doi:10.1007/s11661-000-0078-2. S2CID 137660703.
Gu, D D; Meiners, W; Wissenbach, K; Poprawe, R (May 2012). "Laser additive manufacturing of metallic components: materials, processes and mechanisms". International Materials Reviews. 57 (3): 133–164. Bibcode:2012IMRv...57..133G. doi:10.1179/1743280411Y.0000000014. S2CID 137144519.
Graybill, Benjamin; Li, Ming; Malawey, David; Ma, Chao; Alvarado-Orozco, Juan-Manuel; Martinez-Franco, Enrique (18 June 2018). "Additive Manufacturing of Nickel-Based Superalloys". Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing. College Station, Texas, USA: American Society of Mechanical Engineers. doi:10.1115/MSEC2018-6666. ISBN 978-0-7918-5135-7. S2CID 139639438.
Niranatlumpong, P.; Ponton, C. B.; Evans, H. E. (2000). "The Failure of Protective Oxides on Plasma-Sprayed NiCrAlY Overlay Coatings". Oxidation of Metals. 53 (3–4): 241–258. doi:10.1023/A:1004549219013. S2CID 136826569.
Gell, M.; Vaidyanathan, K.; Barber, B.; Cheng, J.; Jordan, E. (1999). "Mechanism of spallation in platinum aluminide/electron beam physical vapor-deposited thermal barrier coatings". Metallurgical and Materials Transactions A. 30 (2): 427–435. Bibcode:1999MMTA...30..427G. doi:10.1007/s11661-999-0332-1. S2CID 137312835.
Brady, M. P.; Muralidharan, G.; Leonard, D. N.; Haynes, J. A.; Weldon, R. G.; England, R. D. (December 2014). "Long-Term Oxidation of Candidate Cast Iron and Stainless Steel Exhaust System Alloys from 650 to 800 °C in Air with Water Vapor". Oxidation of Metals. 82 (5–6): 359–381. doi:10.1007/s11085-014-9496-1. OSTI 1185421. S2CID 136677636.

tms.org

Randy Bowman. "Superalloys: A Primer and History". Retrieved 6 March 2020 – via tms.org.

uscti.com

Knotek, O. (2001). "Thermal Spraying and Detonation Gun Processes" (PDF). In Bunshah, R. F. (ed.). Handbook of Hard Coatings: Deposition Technologies, Properties and Applications. Park Ridge, NJ: Noyes Pub.; Norwich, NY: William Andrew Pub. pp. 77–107. ISBN 9780815514381.

virginia.edu

"Wadley Research Group '". University of Virginia. Archived from the original on 7 December 2015. Retrieved 3 March 2016.

web.archive.org

"Wadley Research Group '". University of Virginia. Archived from the original on 7 December 2015. Retrieved 3 March 2016.

worldcat.org

search.worldcat.org

Ru, Yi; Li, Shusuo; Zhou, Jian; Pei, Yanling; Wang, Hui; Gong, Shengkai; Xu, Huibin (11 August 2016). "Dislocation network with pair-coupling structure in {111} γ/γ′ interface of Ni-based single crystal superalloy". Scientific Reports. 6 (1): 29941. doi:10.1038/srep29941. ISSN 2045-2322. PMC 4980694. PMID 27511822.
Eggeler, G.; Dlouhy, A. (1 October 1997). "On the formation of 〈010〉-dislocations in the γ′-phase of superalloy single crystals during high temperature low stress creep". Acta Materialia. 45 (10): 4251–4262. doi:10.1016/S1359-6454(97)00084-0. ISSN 1359-6454.
León-Cázares, F.D.; Schlütter, R.; Monni, F.; Hardy, M.C.; Rae, C.M.F. (December 2022). "Nucleation of superlattice intrinsic stacking faults via cross-slip in nickel-based superalloys". Acta Materialia. 241: 118372. Bibcode:2022AcMat.24118372L. doi:10.1016/j.actamat.2022.118372. ISSN 1359-6454.
Dodaran, M.; Ettefagh, A. Hemmasian; Guo, S. M.; Khonsari, M. M.; Meng, W. J.; Shamsaei, N.; Shao, S. (1 February 2020). "Effect of alloying elements on the γ' antiphase boundary energy in Ni-base superalloys". Intermetallics. 117: 106670. doi:10.1016/j.intermet.2019.106670. ISSN 0966-9795.
Mayr, C.; Eggeler, G.; Dlouhy, A. (March 1996). "Analysis of dislocation structures after double shear creep deformation of CMSX6-superalloy single crystals at temperatures above 1000 °C". Materials Science and Engineering: A. 207 (1): 51–63. doi:10.1016/0921-5093(96)80002-5. ISSN 0921-5093.
Tian, Sugui; Zhang, Jinghua; Xu, Yongbo; Hu, Zhuangqi; Yang, Hongcai; Wu, Xin (1 December 2001). "Features and effect factors of creep of single-crystal nickel-base superalloys". Metallurgical and Materials Transactions A. 32 (12): 2947–2957. doi:10.1007/s11661-001-0169-8. ISSN 1543-1940.