آلومینا زیرکونیا (Persian Wikipedia)

Analysis of information sources in references of the Wikipedia article "آلومینا زیرکونیا" in Persian language version.

refsWebsite

Global rank Persian rank

47doi.org

2^nd place

19worldcat.org

5^th place

12^th place

3web.archive.org

1^st place

1thomasnet.com

low place

1springer.com

274^th place

506^th place

1civilica.com

low place

594^th place

1unsw.edu.au

4,584^th place

3,121^st place

1noandishaan.com

low place

civilica.com

پور, حسین, خوارزمی; رنجبر, خلیل, (2015). "تاثیر افزودن اکسید کروم بررفتار تف جوشی و زیر ساختار Al2O3-10ZrO2". CIVILICA. 01.{{cite journal}}: نگهداری CS1: نقطه‌گذاری اضافه (link)

doi.org

Boutz, M. M. R.; Winnubst, A. J. A.; Hartgers, F.; Burggraaf, A. J. (1994). "Effect of additives on densification and deformation of tetragonal zirconia". Journal of Materials Science. 29 (20): 5374–5382. doi:10.1007/bf01171550. ISSN 0022-2461.
Saha, A., and D. C. Agrawal (۱۹۹۸). «Microstructure development in hybrid sol–gel prepared Al2O3–ZrO2 composites». Journal of materials science letters. doi:10.1023/A:100660910.
Xiong, F; Manory, R.R (1999-12). "The effect of test parameters on alumina wear under low contact stress". Wear. 236 (1–2): 240–245. doi:10.1016/s0043-1648(99)00276-8. ISSN 0043-1648. {{cite journal}}: Check date values in: |date= (help)
Collie, M. J (۱۹۸۰). «Corrosion inhibitors—developments since». Materials Science and Engineering. doi:10.1016/0025-5416(84)90058-2.
Marchi, Juliana; Delfino, Carina S.; Bressiani, José C.; Bressiani, Ana H. A.; Marques, Márcia M. (2009-05-26). "Cell Proliferation of Human Fibroblasts on Alumina and Hydroxyapatite-Based Ceramics with Different Surface Treatments†". International Journal of Applied Ceramic Technology. 7 (2): 139–147. doi:10.1111/j.1744-7402.2009.02388.x. ISSN 1546-542X.
Sequeira, S.; Fernandes, M.H.; Neves, N.; Almeida, M.M. (2017-01). "Development and characterization of zirconia–alumina composites for orthopedic implants". Ceramics International. 43 (1): 693–703. doi:10.1016/j.ceramint.2016.09.216. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Osman, Reham; Swain, Michael (2015-03-05). "A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia". Materials. 8 (3): 932–958. doi:10.3390/ma8030932. ISSN 1996-1944.
Senthil Kumar, A.; Raja Durai, A.; Sornakumar, T. (2004-01). "Development of alumina–ceria ceramic composite cutting tool". International Journal of Refractory Metals and Hard Materials. 22 (1): 17–20. doi:10.1016/j.ijrmhm.2003.10.005. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
GARVIE, R. C.; HANNINK, R. H.; PASCOE, R. T. (1975-12). "Ceramic steel?". Nature. 258 (5537): 703–704. doi:10.1038/258703a0. ISSN 0028-0836. {{cite journal}}: Check date values in: |date= (help)
Rao, A.Srinivasa; Cannon, W.Roger (1989-01). "Alumina/zirconia composites produced from commercial alumina and synthesised hydrous zirconia". Ceramics International. 15 (3): 179–188. doi:10.1016/0272-8842(89)90014-x. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Tuan, W.H.; Chen, R.Z.; Wang, T.C.; Cheng, C.H.; Kuo, P.S. (2002-12). "Mechanical properties of Al2O3/ZrO2 composites". Journal of the European Ceramic Society. 22 (16): 2827–2833. doi:10.1016/s0955-2219(02)00043-2. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Casellas, D; Ràfols, I; Llanes, L; Anglada, M (1999-05). "Fracture toughness of zirconia–alumina composites". International Journal of Refractory Metals and Hard Materials. 17 (1–3): 11–20. doi:10.1016/s0263-4368(98)00064-x. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
Wang, T.C.; Chen, R.Z.; Tuan, W.H. (2004-05). "Effect of zirconia addition on the oxidation resistance of Ni-toughened Al2O3". Journal of the European Ceramic Society. 24 (5): 833–840. doi:10.1016/s0955-2219(03)00337-6. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Wang, J.; Stevens, R. (1989-10). "Zirconia-toughened alumina (ZTA) ceramics". Journal of Materials Science. 24 (10): 3421–3440. doi:10.1007/bf02385721. ISSN 0022-2461. {{cite journal}}: Check date values in: |date= (help)
Magnani, Giuseppe; Brillante, Aldo (2005-10). "Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia–alumina composites". Journal of the European Ceramic Society. 25 (15): 3383–3392. doi:10.1016/j.jeurceramsoc.2004.09.025. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Saha, A.; Agrawal, D. C. (1998). "Microstructure development in hybrid sol–gel prepared Al2O3–ZrO2 composites". Journal of Materials Science Letters (به انگلیسی). 17 (15): 1333–1336. doi:10.1023/a:1006609104115. ISSN 0261-8028.
Lange, F. F. (۱۹۸۲). «Transformation toughening». Journal of Materials science. doi:10.1007/BF00809057.
Ruf, H., and Anthony G. Evans (۱۹۸۳). «Toughening by monoclinic zirconia». Journal of the American Ceramic Society. doi:10.1111/j.1151-2916.1983.tb10042.x.
Sarkar, D.; Adak, S.; Mitra, N.K. (2007-01). "Preparation and characterization of an Al2O3–ZrO2 nanocomposite, Part I: Powder synthesis and transformation behavior during fracture". Composites Part A: Applied Science and Manufacturing. 38 (1): 124–131. doi:10.1016/j.compositesa.2006.01.005. ISSN 1359-835X. {{cite journal}}: Check date values in: |date= (help)
https://doi.org/10.1111/j.1151-2916.1982.tb09939.x
https://doi.org/10.1016/j.compositesa.2006.01.005
https://doi.org/10.1016/S0924-0136(03)00396-0
https://doi.org/10.1016/j.matchemphys.2008.05.041
https://doi.org/10.1111/j.1151-2916.1981.tb09555.x
https://doi.org/10.1016/j.dental.2007.05.005
https://doi.org/10.1111/j.1151-2916.1976.tb09386.x
https://doi.org/10.1007/BF02385721
https://doi.org/10.1016/j.ceramint.2005.02.012
https://doi.org/10.1016/j.jeurceramsoc.2012.02.057
Khaskhoussi, Amani; Calabrese, Luigi; Bouaziz, Jamel; Proverbio, Edoardo (2017-09). "Effect of TiO 2 addition on microstructure of zirconia/alumina sintered ceramics". Ceramics International. 43 (13): 10392–10402. doi:10.1016/j.ceramint.2017.05.074. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)

dx.doi.org

Boutz, M. M. R.; Winnubst, A. J. A.; Hartgers, F.; Burggraaf, A. J. (1994). "Effect of additives on densification and deformation of tetragonal zirconia". Journal of Materials Science. 29 (20): 5374–5382. doi:10.1007/bf01171550. ISSN 0022-2461.
Summitt, Robert (1984-11). "Corrosion inhibitors—developments since 1980". Materials Science and Engineering. 67 (2): 255–256. ISSN 0025-5416. {{cite journal}}: Check date values in: |date= (help)
Xiong, F; Manory, R.R (1999-12). "The effect of test parameters on alumina wear under low contact stress". Wear. 236 (1–2): 240–245. doi:10.1016/s0043-1648(99)00276-8. ISSN 0043-1648. {{cite journal}}: Check date values in: |date= (help)
Marchi, Juliana; Delfino, Carina S.; Bressiani, José C.; Bressiani, Ana H. A.; Marques, Márcia M. (2009-05-26). "Cell Proliferation of Human Fibroblasts on Alumina and Hydroxyapatite-Based Ceramics with Different Surface Treatments†". International Journal of Applied Ceramic Technology. 7 (2): 139–147. doi:10.1111/j.1744-7402.2009.02388.x. ISSN 1546-542X.
Sequeira, S.; Fernandes, M.H.; Neves, N.; Almeida, M.M. (2017-01). "Development and characterization of zirconia–alumina composites for orthopedic implants". Ceramics International. 43 (1): 693–703. doi:10.1016/j.ceramint.2016.09.216. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Osman, Reham; Swain, Michael (2015-03-05). "A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia". Materials. 8 (3): 932–958. doi:10.3390/ma8030932. ISSN 1996-1944.
Senthil Kumar, A.; Raja Durai, A.; Sornakumar, T. (2004-01). "Development of alumina–ceria ceramic composite cutting tool". International Journal of Refractory Metals and Hard Materials. 22 (1): 17–20. doi:10.1016/j.ijrmhm.2003.10.005. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
GARVIE, R. C.; HANNINK, R. H.; PASCOE, R. T. (1975-12). "Ceramic steel?". Nature. 258 (5537): 703–704. doi:10.1038/258703a0. ISSN 0028-0836. {{cite journal}}: Check date values in: |date= (help)
Rao, A.Srinivasa; Cannon, W.Roger (1989-01). "Alumina/zirconia composites produced from commercial alumina and synthesised hydrous zirconia". Ceramics International. 15 (3): 179–188. doi:10.1016/0272-8842(89)90014-x. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Tuan, W.H.; Chen, R.Z.; Wang, T.C.; Cheng, C.H.; Kuo, P.S. (2002-12). "Mechanical properties of Al2O3/ZrO2 composites". Journal of the European Ceramic Society. 22 (16): 2827–2833. doi:10.1016/s0955-2219(02)00043-2. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Casellas, D; Ràfols, I; Llanes, L; Anglada, M (1999-05). "Fracture toughness of zirconia–alumina composites". International Journal of Refractory Metals and Hard Materials. 17 (1–3): 11–20. doi:10.1016/s0263-4368(98)00064-x. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
Wang, T.C.; Chen, R.Z.; Tuan, W.H. (2004-05). "Effect of zirconia addition on the oxidation resistance of Ni-toughened Al2O3". Journal of the European Ceramic Society. 24 (5): 833–840. doi:10.1016/s0955-2219(03)00337-6. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Wang, J.; Stevens, R. (1989-10). "Zirconia-toughened alumina (ZTA) ceramics". Journal of Materials Science. 24 (10): 3421–3440. doi:10.1007/bf02385721. ISSN 0022-2461. {{cite journal}}: Check date values in: |date= (help)
Magnani, Giuseppe; Brillante, Aldo (2005-10). "Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia–alumina composites". Journal of the European Ceramic Society. 25 (15): 3383–3392. doi:10.1016/j.jeurceramsoc.2004.09.025. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Sarkar, D.; Adak, S.; Mitra, N.K. (2007-01). "Preparation and characterization of an Al2O3–ZrO2 nanocomposite, Part I: Powder synthesis and transformation behavior during fracture". Composites Part A: Applied Science and Manufacturing. 38 (1): 124–131. doi:10.1016/j.compositesa.2006.01.005. ISSN 1359-835X. {{cite journal}}: Check date values in: |date= (help)
http://dx.doi.org/10.1007/BF00719732
Khaskhoussi, Amani; Calabrese, Luigi; Bouaziz, Jamel; Proverbio, Edoardo (2017-09). "Effect of TiO 2 addition on microstructure of zirconia/alumina sintered ceramics". Ceramics International. 43 (13): 10392–10402. doi:10.1016/j.ceramint.2017.05.074. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)

noandishaan.com

«نسخه آرشیو شده». بایگانی‌شده از اصلی در ۱۳ نوامبر ۲۰۱۸. دریافت‌شده در ۲۵ نوامبر ۲۰۱۸.

springer.com

link.springer.com

Saha, A.; Agrawal, D. C. (1998). "Microstructure development in hybrid sol–gel prepared Al2O3–ZrO2 composites". Journal of Materials Science Letters (به انگلیسی). 17 (15): 1333–1336. doi:10.1023/a:1006609104115. ISSN 0261-8028.

thomasnet.com

«Zirconia Toughened Alumina» (به انگلیسی). بایگانی‌شده از اصلی در ۱۵ نوامبر ۲۰۱۸. دریافت‌شده در ۲۰۱۸-۱۱-۱۵.

unsw.edu.au

materials.unsw.edu.au

T, Burg , O. Standard, http://www.materials.unsw.edu.au/news/biomed-s.pdf بایگانی‌شده در ۱۲ نوامبر ۲۰۱۸ توسط Wayback Machine. Materials for Biomedical Engineering, , 2001 Materials Science and Engineering, Student Notes,05-07-2005

web.archive.org

«Zirconia Toughened Alumina» (به انگلیسی). بایگانی‌شده از اصلی در ۱۵ نوامبر ۲۰۱۸. دریافت‌شده در ۲۰۱۸-۱۱-۱۵.
T, Burg , O. Standard, http://www.materials.unsw.edu.au/news/biomed-s.pdf بایگانی‌شده در ۱۲ نوامبر ۲۰۱۸ توسط Wayback Machine. Materials for Biomedical Engineering, , 2001 Materials Science and Engineering, Student Notes,05-07-2005
«نسخه آرشیو شده». بایگانی‌شده از اصلی در ۱۳ نوامبر ۲۰۱۸. دریافت‌شده در ۲۵ نوامبر ۲۰۱۸.

worldcat.org

Boutz, M. M. R.; Winnubst, A. J. A.; Hartgers, F.; Burggraaf, A. J. (1994). "Effect of additives on densification and deformation of tetragonal zirconia". Journal of Materials Science. 29 (20): 5374–5382. doi:10.1007/bf01171550. ISSN 0022-2461.
Summitt, Robert (1984-11). "Corrosion inhibitors—developments since 1980". Materials Science and Engineering. 67 (2): 255–256. ISSN 0025-5416. {{cite journal}}: Check date values in: |date= (help)
Xiong, F; Manory, R.R (1999-12). "The effect of test parameters on alumina wear under low contact stress". Wear. 236 (1–2): 240–245. doi:10.1016/s0043-1648(99)00276-8. ISSN 0043-1648. {{cite journal}}: Check date values in: |date= (help)
Marchi, Juliana; Delfino, Carina S.; Bressiani, José C.; Bressiani, Ana H. A.; Marques, Márcia M. (2009-05-26). "Cell Proliferation of Human Fibroblasts on Alumina and Hydroxyapatite-Based Ceramics with Different Surface Treatments†". International Journal of Applied Ceramic Technology. 7 (2): 139–147. doi:10.1111/j.1744-7402.2009.02388.x. ISSN 1546-542X.
Sequeira, S.; Fernandes, M.H.; Neves, N.; Almeida, M.M. (2017-01). "Development and characterization of zirconia–alumina composites for orthopedic implants". Ceramics International. 43 (1): 693–703. doi:10.1016/j.ceramint.2016.09.216. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Osman, Reham; Swain, Michael (2015-03-05). "A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia". Materials. 8 (3): 932–958. doi:10.3390/ma8030932. ISSN 1996-1944.
Senthil Kumar, A.; Raja Durai, A.; Sornakumar, T. (2004-01). "Development of alumina–ceria ceramic composite cutting tool". International Journal of Refractory Metals and Hard Materials. 22 (1): 17–20. doi:10.1016/j.ijrmhm.2003.10.005. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
GARVIE, R. C.; HANNINK, R. H.; PASCOE, R. T. (1975-12). "Ceramic steel?". Nature. 258 (5537): 703–704. doi:10.1038/258703a0. ISSN 0028-0836. {{cite journal}}: Check date values in: |date= (help)
Rao, A.Srinivasa; Cannon, W.Roger (1989-01). "Alumina/zirconia composites produced from commercial alumina and synthesised hydrous zirconia". Ceramics International. 15 (3): 179–188. doi:10.1016/0272-8842(89)90014-x. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)
Tuan, W.H.; Chen, R.Z.; Wang, T.C.; Cheng, C.H.; Kuo, P.S. (2002-12). "Mechanical properties of Al2O3/ZrO2 composites". Journal of the European Ceramic Society. 22 (16): 2827–2833. doi:10.1016/s0955-2219(02)00043-2. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Casellas, D; Ràfols, I; Llanes, L; Anglada, M (1999-05). "Fracture toughness of zirconia–alumina composites". International Journal of Refractory Metals and Hard Materials. 17 (1–3): 11–20. doi:10.1016/s0263-4368(98)00064-x. ISSN 0263-4368. {{cite journal}}: Check date values in: |date= (help)
Wang, T.C.; Chen, R.Z.; Tuan, W.H. (2004-05). "Effect of zirconia addition on the oxidation resistance of Ni-toughened Al2O3". Journal of the European Ceramic Society. 24 (5): 833–840. doi:10.1016/s0955-2219(03)00337-6. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Wang, J.; Stevens, R. (1989-10). "Zirconia-toughened alumina (ZTA) ceramics". Journal of Materials Science. 24 (10): 3421–3440. doi:10.1007/bf02385721. ISSN 0022-2461. {{cite journal}}: Check date values in: |date= (help)
Magnani, Giuseppe; Brillante, Aldo (2005-10). "Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia–alumina composites". Journal of the European Ceramic Society. 25 (15): 3383–3392. doi:10.1016/j.jeurceramsoc.2004.09.025. ISSN 0955-2219. {{cite journal}}: Check date values in: |date= (help)
Saha, A.; Agrawal, D. C. (1998). "Microstructure development in hybrid sol–gel prepared Al2O3–ZrO2 composites". Journal of Materials Science Letters (به انگلیسی). 17 (15): 1333–1336. doi:10.1023/a:1006609104115. ISSN 0261-8028.
جعفر جعفريپور ميبدي، يعقوب علّي ، صاحبعلي منافي و احمد هادي (۱۳۸۸). «ساخت و بررسي ريزساختار و خواص مكانيكي نانوكامپوزيت هاي آلومينا-زيركونيا». نانو مواد (تحقيقات مواد نانو كامپوزيتي). شاپا https://www.sid.ir/fa/journal/ViewPaper.aspx?FID=۶۰۰۰۱۱۳۸۸۰۴۰۸مقدار |issn= را بررسی کنید (کمک).
Sarkar, D.; Adak, S.; Mitra, N.K. (2007-01). "Preparation and characterization of an Al2O3–ZrO2 nanocomposite, Part I: Powder synthesis and transformation behavior during fracture". Composites Part A: Applied Science and Manufacturing. 38 (1): 124–131. doi:10.1016/j.compositesa.2006.01.005. ISSN 1359-835X. {{cite journal}}: Check date values in: |date= (help)
جعفر جعفريپور ميبدی، يعقوب علّي ،صاحبعلي منافي و احمد هادي (۱۳۸۸). «ساخت و بررسي ريزساختار و خواص مكانيكي نانوكامپوزيت هاي آلومينا-زيركونيا». نانو مواد (تحقيقات مواد نانو كامپوزيتي). شاپا https://www.sid.ir/fa/journal/ViewPaper.aspx?FID=۶۰۰۰۱۱۳۸۸۰۴۰۸مقدار |issn= را بررسی کنید (کمک).
Khaskhoussi, Amani; Calabrese, Luigi; Bouaziz, Jamel; Proverbio, Edoardo (2017-09). "Effect of TiO 2 addition on microstructure of zirconia/alumina sintered ceramics". Ceramics International. 43 (13): 10392–10402. doi:10.1016/j.ceramint.2017.05.074. ISSN 0272-8842. {{cite journal}}: Check date values in: |date= (help)