"How many addressing modes are enough?" by F. Chow, S. Correll, M. Himelstein, E. Killian, L. Weber, all from MIPS Computer Systems, Inc. 1987 "An Overview of the MIPS-X-MP Project" by John L. Hennessy and Mark A. Horowitz 1986: "MIPS-X uses a single addressing mode: base register plus offset. This simple addressing mode allows the computation of the effective address to begin very early"
dl.acm.org
"Instruction Set Principles: Addressing Mode Usage (Summary)"Archived 2011年9月30日, at the Wayback Machine. by Dr. Sofiène Tahar "3 programs measured on machine with all address modes (VAX)": "displacement mode" and "immediate mode" are used 75% of the time. "Fundamentals of Computer Design"[リンク切れ] p. 112-113 "Frequency of addressing modes for TI TMS320C54x DSP. The C54x has 17 data addressing modes, not counting register access, but the four found in MIPS account for 70% of the modes. Autoincrement and autodecrement, found in some RISC architectures, account for another 25% of the usage. This data was collected form a measurement of static instructions for the C-callable library of 54 DSP routines coded in assembly language." "Efficient and Language-Independent Mobile Programs" by Ali-Reza Adl-Tabatabai, Geoff Langdale, Steven Lucco, and Robert Wahbe 1995: "79% of all instructions executed could be replaced by RISC instructions or synthesized into RISC instructions using only basic block instruction combination."
berkeley.edu
cs.berkeley.edu
Kong and Patterson. "Instruction set design". 1995. slide 27. [1]
"Instruction Set Principles: Addressing Mode Usage (Summary)"Archived 2011年9月30日, at the Wayback Machine. by Dr. Sofiène Tahar "3 programs measured on machine with all address modes (VAX)": "displacement mode" and "immediate mode" are used 75% of the time. "Fundamentals of Computer Design"[リンク切れ] p. 112-113 "Frequency of addressing modes for TI TMS320C54x DSP. The C54x has 17 data addressing modes, not counting register access, but the four found in MIPS account for 70% of the modes. Autoincrement and autodecrement, found in some RISC architectures, account for another 25% of the usage. This data was collected form a measurement of static instructions for the C-callable library of 54 DSP routines coded in assembly language." "Efficient and Language-Independent Mobile Programs" by Ali-Reza Adl-Tabatabai, Geoff Langdale, Steven Lucco, and Robert Wahbe 1995: "79% of all instructions executed could be replaced by RISC instructions or synthesized into RISC instructions using only basic block instruction combination."
hnue.edu.vn
fit.hnue.edu.vn
"Instruction Set Principles: Addressing Mode Usage (Summary)"Archived 2011年9月30日, at the Wayback Machine. by Dr. Sofiène Tahar "3 programs measured on machine with all address modes (VAX)": "displacement mode" and "immediate mode" are used 75% of the time. "Fundamentals of Computer Design"[リンク切れ] p. 112-113 "Frequency of addressing modes for TI TMS320C54x DSP. The C54x has 17 data addressing modes, not counting register access, but the four found in MIPS account for 70% of the modes. Autoincrement and autodecrement, found in some RISC architectures, account for another 25% of the usage. This data was collected form a measurement of static instructions for the C-callable library of 54 DSP routines coded in assembly language." "Efficient and Language-Independent Mobile Programs" by Ali-Reza Adl-Tabatabai, Geoff Langdale, Steven Lucco, and Robert Wahbe 1995: "79% of all instructions executed could be replaced by RISC instructions or synthesized into RISC instructions using only basic block instruction combination."
"Instruction Set Principles: Addressing Mode Usage (Summary)"Archived 2011年9月30日, at the Wayback Machine. by Dr. Sofiène Tahar "3 programs measured on machine with all address modes (VAX)": "displacement mode" and "immediate mode" are used 75% of the time. "Fundamentals of Computer Design"[リンク切れ] p. 112-113 "Frequency of addressing modes for TI TMS320C54x DSP. The C54x has 17 data addressing modes, not counting register access, but the four found in MIPS account for 70% of the modes. Autoincrement and autodecrement, found in some RISC architectures, account for another 25% of the usage. This data was collected form a measurement of static instructions for the C-callable library of 54 DSP routines coded in assembly language." "Efficient and Language-Independent Mobile Programs" by Ali-Reza Adl-Tabatabai, Geoff Langdale, Steven Lucco, and Robert Wahbe 1995: "79% of all instructions executed could be replaced by RISC instructions or synthesized into RISC instructions using only basic block instruction combination."
