Lazarevic, David; Aoustin, Emmanuelle; Buclet, Nicolas; Brandt, Nils (December 2010). “Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective”. Resources, Conservation and Recycling55 (2): 246–259. doi:10.1016/j.resconrec.2010.09.014.
Andrady, Anthony L. (February 1994). “Assessment of Environmental Biodegradation of Synthetic Polymers”. Journal of Macromolecular Science, Part C: Polymer Reviews34 (1): 25–76. doi:10.1080/15321799408009632.
Ahmed, Temoor; Shahid, Muhammad; Azeem, Farrukh; Rasul, Ijaz; Shah, Asad Ali; Noman, Muhammad; Hameed, Amir; Manzoor, Natasha et al. (March 2018). “Biodegradation of plastics: current scenario and future prospects for environmental safety”. Environmental Science and Pollution Research25 (8): 7287–7298. doi:10.1007/s11356-018-1234-9. PMID29332271.
Wichai-utcha, N.; Chavalparit, O. (1 January 2019). “3Rs Policy and plastic waste management in Thailand” (英語). Journal of Material Cycles and Waste Management21 (1): 10–22. doi:10.1007/s10163-018-0781-y. ISSN1611-8227.
Mohammed, Musa; Shafiq, Nasir; Elmansoury, Ali; Al-Mekhlafi, Al-Baraa Abdulrahman; Rached, Ehab Farouk; Zawawi, Noor Amila; Haruna, Abdulrahman; Rafindadi, Aminu Darda’u et al. (January 2021). “Modeling of 3R (Reduce, Reuse and Recycle) for Sustainable Construction Waste Reduction: A Partial Least Squares Structural Equation Modeling (PLS-SEM)” (英語). Sustainability13 (19): 10660. doi:10.3390/su131910660. ISSN2071-1050.
Zamroni, M.; Prahara, Rahma Sandhi; Kartiko, Ari; Purnawati, Dia; Kusuma, Dedi Wijaya (1 February 2020). “The Waste Management Program Of 3R (Reduce, Reuse, Recycle) By Economic Incentive And Facility Support” (英語). Journal of Physics: Conference Series1471 (1): 012048. Bibcode: 2020JPhCS1471a2048Z. doi:10.1088/1742-6596/1471/1/012048.
Hahladakis, John N.; Velis, Costas A.; Weber, Roland; Iacovidou, Eleni; Purnell, Phil (February 2018). “An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling”. Journal of Hazardous Materials344: 179–199. doi:10.1016/j.jhazmat.2017.10.014. PMID29035713.
Cimpan, Ciprian; Maul, Anja; Wenzel, Henrik; Pretz, Thomas (January 2016). “Techno-economic assessment of central sorting at material recovery facilities – the case of lightweight packaging waste”. Journal of Cleaner Production112: 4387–4397. doi:10.1016/j.jclepro.2015.09.011.
Poulsen, Otto M.; Breum, Niels O.; Ebbehøj, Niels; Hansen, Åse Marie; Ivens, Ulla I.; van Lelieveld, Duco; Malmros, Per; Matthiasen, Leo et al. (May 1995). “Sorting and recycling of domestic waste. Review of occupational health problems and their possible causes”. Science of the Total Environment168 (1): 33–56. Bibcode: 1995ScTEn.168...33P. doi:10.1016/0048-9697(95)04521-2. PMID7610383.
Driedger, Alexander G.J.; Dürr, Hans H.; Mitchell, Kristen; Van Cappellen, Philippe (2015). “Plastic debris in the Laurentian Great Lakes: A review”. Journal of Great Lakes Research41 (1): 9–19. Bibcode: 2015JGLR...41....9D. doi:10.1016/j.jglr.2014.12.020.
Bauer, Markus; Lehner, Markus; Schwabl, Daniel; Flachberger, Helmut; Kranzinger, Lukas; Pomberger, Roland; Hofer, Wolfgang (July 2018). “Sink–float density separation of post-consumer plastics for feedstock recycling”. Journal of Material Cycles and Waste Management20 (3): 1781–1791. doi:10.1007/s10163-018-0748-z.
Hubo, Sara; Delva, Laurens; Van Damme, Nicolas; Ragaert, Kim (2016). Blending of recycled mixed polyolefins with recycled polypropylene: Effect on physical and mechanical properties. AIP Conference Proceedings. 1779. pp. 140006. doi:10.1063/1.4965586.
Bonifazi, Giuseppe; Di Maio, Francesco; Potenza, Fabio; Serranti, Silvia (May 2016). “FT-IR Analysis and Hyperspectral Imaging Applied to Postconsumer Plastics Packaging Characterization and Sorting”. IEEE Sensors Journal16 (10): 3428–3434. Bibcode: 2016ISenJ..16.3428B. doi:10.1109/JSEN.2015.2449867.
Dodbiba, G.; Sadaki, J.; Okaya, K.; Shibayama, A.; Fujita, T. (December 2005). “The use of air tabling and triboelectric separation for separating a mixture of three plastics”. Minerals Engineering18 (15): 1350–1360. Bibcode: 2005MiEng..18.1350D. doi:10.1016/j.mineng.2005.02.015.
Hollstein, Frank; Wohllebe, Markus; Arnaiz, Sixto (24 October 2015). “Identification and Sorting of Plastics Film Waste by NIR-Hyperspectral-Imaging”. Near Infrared Spectroscopy: Proceedings of the International Conference. doi:10.17648/NIR-2015-34127
Kleinhans, Kerstin; Demets, Ruben; Dewulf, Jo; Ragaert, Kim; De Meester, Steven (June 2021). “Non-household end-use plastics: the 'forgotten' plastics for the circular economy”. Current Opinion in Chemical Engineering32: 100680. doi:10.1016/j.coche.2021.100680. ISSN2211-3398.
Brown, Erina; MacDonald, Anna; Allen, Steve; Allen, Deonie (2023-05-01). “The potential for a plastic recycling facility to release microplastic pollution and possible filtration remediation effectiveness” (英語). Journal of Hazardous Materials Advances10: 100309. doi:10.1016/j.hazadv.2023.100309. ISSN2772-4166.
Aldas, Miguel; Paladines, Andrea; Valle, Vladimir; Pazmiño, Miguel; Quiroz, Francisco (2018). “Effect of the Prodegradant-Additive Plastics Incorporated on the Polyethylene Recycling”. International Journal of Polymer Science2018: 1–10. doi:10.1155/2018/2474176.
Pfaendner, R.; Herbst, H.; Hoffmann, K.; Sitek, F. (October 1995). “Recycling and restabilization of polymers for high quality applications. An Overview”. Angewandte Makromolekulare Chemie232 (1): 193–227. doi:10.1002/apmc.1995.052320113.
Pfaendner, Rudolf (July 2022). “Restabilization – 30 years of research for quality improvement of recycled plastics Review”. Polymer Degradation and Stability203: 110082. doi:10.1016/j.polymdegradstab.2022.110082.
Paci, M; La Mantia, F.P (January 1999). “Influence of small amounts of polyvinylchloride on the recycling of polyethyleneterephthalate”. Polymer Degradation and Stability63 (1): 11–14. doi:10.1016/S0141-3910(98)00053-6.
Welle, Frank (September 2011). “Twenty years of PET bottle to bottle recycling—An overview”. Resources, Conservation and Recycling55 (11): 865–875. doi:10.1016/j.resconrec.2011.04.009.
Schyns, Zoé O. G.; Shaver, Michael P. (February 2021). “Mechanical Recycling of Packaging Plastics: A Review”. Macromolecular Rapid Communications42 (3): 2000415. doi:10.1002/marc.202000415. PMID33000883.
Huysman, Sofie; Debaveye, Sam; Schaubroeck, Thomas; Meester, Steven De; Ardente, Fulvio; Mathieux, Fabrice; Dewulf, Jo (August 2015). “The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders”. Resources, Conservation and Recycling101: 53–60. doi:10.1016/j.resconrec.2015.05.014. hdl:1854/LU-6851927.
Shen, Li; Worrell, Ernst; Patel, Martin K. (November 2010). “Open-loop recycling: A LCA case study of PET bottle-to-fibre recycling”. Resources, Conservation and Recycling55 (1): 34–52. doi:10.1016/j.resconrec.2010.06.014.
Awoyera, P.O.; Adesina, A. (June 2020). “Plastic wastes to construction products: Status, limitations and future perspective”. Case Studies in Construction Materials12: e00330. doi:10.1016/j.cscm.2020.e00330.
Lee, Alicia; Liew, Mei Shan (January 2021). “Tertiary recycling of plastics waste: an analysis of feedstock, chemical and biological degradation methods”. Journal of Material Cycles and Waste Management23 (1): 32–43. doi:10.1007/s10163-020-01106-2.
Rahimi, AliReza; García, Jeannette M. (June 2017). “Chemical recycling of waste plastics for new materials production”. Nature Reviews Chemistry1 (6): 0046. doi:10.1038/s41570-017-0046.
Coates, Geoffrey W.; Getzler, Yutan D. Y. L. (July 2020). “Chemical recycling to monomer for an ideal, circular polymer economy”. Nature Reviews Materials5 (7): 501–516. Bibcode: 2020NatRM...5..501C. doi:10.1038/s41578-020-0190-4.
Thiounn, Timmy; Smith, Rhett C. (15 May 2020). “Advances and approaches for chemical recycling of plastic waste”. Journal of Polymer Science58 (10): 1347–1364. doi:10.1002/pol.20190261.
Kumagai, Shogo; Nakatani, Jun; Saito, Yuko; Fukushima, Yasuhiro; Yoshioka, Toshiaki (1 November 2020). “Latest Trends and Challenges in Feedstock Recycling of Polyolefinic Plastics”. Journal of the Japan Petroleum Institute63 (6): 345–364. doi:10.1627/jpi.63.345.
Kaminsky, W; Predel, M; Sadiki, A (September 2004). “Feedstock recycling of polymers by pyrolysis in a fluidised bed”. Polymer Degradation and Stability85 (3): 1045–1050. doi:10.1016/j.polymdegradstab.2003.05.002.
Bukkarapu, Kiran Raj; Gangadhar, D. Siva; Jyothi, Y.; Kanasani, Prasad (18 July 2018). “Management, conversion, and utilization of waste plastic as a source of sustainable energy to run automotive: a review”. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects40 (14): 1681–1692. doi:10.1080/15567036.2018.1486898.
Butler, E.; Devlin, G.; McDonnell, K. (1 August 2011). “Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research”. Waste and Biomass Valorization2 (3): 227–255. doi:10.1007/s12649-011-9067-5. hdl:10197/6103.
Rollinson, Andrew Neil; Oladejo, Jumoke Mojisola (February 2019). “'Patented blunderings', efficiency awareness, and self-sustainability claims in the pyrolysis energy from waste sector”. Resources, Conservation and Recycling141: 233–242. doi:10.1016/j.resconrec.2018.10.038.
Fernández-González, J.M.; Grindlay, A.L.; Serrano-Bernardo, F.; Rodríguez-Rojas, M.I.; Zamorano, M. (September 2017). “Economic and environmental review of Waste-to-Energy systems for municipal solid waste management in medium and small municipalities”. Waste Management67: 360–374. Bibcode: 2017WaMan..67..360F. doi:10.1016/j.wasman.2017.05.003. PMID28501263.
Benavides, Pahola Thathiana; Sun, Pingping; Han, Jeongwoo; Dunn, Jennifer B.; Wang, Michael (September 2017). “Life-cycle analysis of fuels from post-use non-recycled plastics”. Fuel203: 11–22. doi:10.1016/j.fuel.2017.04.070. OSTI1353191.
Nugroho, Arif Setyo; Chamim, Moch.; Hidayah, Fatimah N. (2018). Plastic waste as an alternative energy. Human-Dedicated Sustainable Product and Process Design: Materials. AIP Conference Proceedings. Vol. 1977. p. 060010. Bibcode:2018AIPC.1977f0010N. doi:10.1063/1.5043022。
Anuar Sharuddin, Shafferina Dayana; Abnisa, Faisal; Wan Daud, Wan Mohd Ashri; Aroua, Mohamed Kheireddine (May 2016). “A review on pyrolysis of plastic wastes”. Energy Conversion and Management115: 308–326. doi:10.1016/j.enconman.2016.02.037.
Miandad, R.; Barakat, M. A.; Aburiazaiza, Asad S.; Rehan, M.; Nizami, A. S. (1 July 2016). “Catalytic pyrolysis of plastic waste: A review”. Process Safety and Environmental Protection102: 822–838. doi:10.1016/j.psep.2016.06.022.
Geyer, B.; Lorenz, G.; Kandelbauer, A. (2016). “Recycling of poly(ethylene terephthalate) – A review focusing on chemical methods”. Express Polymer Letters10 (7): 559–586. doi:10.3144/expresspolymlett.2016.53.
Singh, Narinder; Hui, David; Singh, Rupinder; Ahuja, I.P.S.; Feo, Luciano; Fraternali, Fernando (April 2017). “Recycling of plastic solid waste: A state of art review and future applications”. Composites Part B: Engineering115: 409–422. doi:10.1016/j.compositesb.2016.09.013.
Nomura, Seiji (March 2015). “Use of Waste Plastics in Coke Oven: A Review”. Journal of Sustainable Metallurgy1 (1): 85–93. doi:10.1007/s40831-014-0001-5.
Gradus, Raymond H.J.M.; Nillesen, Paul H.L.; Dijkgraaf, Elbert; van Koppen, Rick J. (May 2017). “A Cost-effectiveness Analysis for Incineration or Recycling of Dutch Household Plastic Waste”. Ecological Economics135: 22–28. doi:10.1016/j.ecolecon.2016.12.021.
Bishop, George; Styles, David; Lens, Piet N.L. (September 2020). “Recycling of European plastic is a pathway for plastic debris in the ocean”. Environment International142: 105893. doi:10.1016/j.envint.2020.105893. PMID32603969.
Official Journal of the EC; Commission Decision (97/129/EC) establishing the ID system for packaging materials pursuant to European Parliament & Council Directive 94/62/EC
Huysman, Sofie; Debaveye, Sam; Schaubroeck, Thomas; Meester, Steven De; Ardente, Fulvio; Mathieux, Fabrice; Dewulf, Jo (August 2015). “The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders”. Resources, Conservation and Recycling101: 53–60. doi:10.1016/j.resconrec.2015.05.014. hdl:1854/LU-6851927.
Butler, E.; Devlin, G.; McDonnell, K. (1 August 2011). “Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research”. Waste and Biomass Valorization2 (3): 227–255. doi:10.1007/s12649-011-9067-5. hdl:10197/6103.
Poulsen, Otto M.; Breum, Niels O.; Ebbehøj, Niels; Hansen, Åse Marie; Ivens, Ulla I.; van Lelieveld, Duco; Malmros, Per; Matthiasen, Leo et al. (May 1995). “Sorting and recycling of domestic waste. Review of occupational health problems and their possible causes”. Science of the Total Environment168 (1): 33–56. Bibcode: 1995ScTEn.168...33P. doi:10.1016/0048-9697(95)04521-2. PMID7610383.
Driedger, Alexander G.J.; Dürr, Hans H.; Mitchell, Kristen; Van Cappellen, Philippe (2015). “Plastic debris in the Laurentian Great Lakes: A review”. Journal of Great Lakes Research41 (1): 9–19. Bibcode: 2015JGLR...41....9D. doi:10.1016/j.jglr.2014.12.020.
Dodbiba, G.; Sadaki, J.; Okaya, K.; Shibayama, A.; Fujita, T. (December 2005). “The use of air tabling and triboelectric separation for separating a mixture of three plastics”. Minerals Engineering18 (15): 1350–1360. Bibcode: 2005MiEng..18.1350D. doi:10.1016/j.mineng.2005.02.015.
Coates, Geoffrey W.; Getzler, Yutan D. Y. L. (July 2020). “Chemical recycling to monomer for an ideal, circular polymer economy”. Nature Reviews Materials5 (7): 501–516. Bibcode: 2020NatRM...5..501C. doi:10.1038/s41578-020-0190-4.
Fernández-González, J.M.; Grindlay, A.L.; Serrano-Bernardo, F.; Rodríguez-Rojas, M.I.; Zamorano, M. (September 2017). “Economic and environmental review of Waste-to-Energy systems for municipal solid waste management in medium and small municipalities”. Waste Management67: 360–374. Bibcode: 2017WaMan..67..360F. doi:10.1016/j.wasman.2017.05.003. PMID28501263.
Nugroho, Arif Setyo; Chamim, Moch.; Hidayah, Fatimah N. (2018). Plastic waste as an alternative energy. Human-Dedicated Sustainable Product and Process Design: Materials. AIP Conference Proceedings. Vol. 1977. p. 060010. Bibcode:2018AIPC.1977f0010N. doi:10.1063/1.5043022。
Hahladakis, John N.; Velis, Costas A.; Weber, Roland; Iacovidou, Eleni; Purnell, Phil (February 2018). “An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling”. Journal of Hazardous Materials344: 179–199. doi:10.1016/j.jhazmat.2017.10.014. PMID29035713.
Poulsen, Otto M.; Breum, Niels O.; Ebbehøj, Niels; Hansen, Åse Marie; Ivens, Ulla I.; van Lelieveld, Duco; Malmros, Per; Matthiasen, Leo et al. (May 1995). “Sorting and recycling of domestic waste. Review of occupational health problems and their possible causes”. Science of the Total Environment168 (1): 33–56. Bibcode: 1995ScTEn.168...33P. doi:10.1016/0048-9697(95)04521-2. PMID7610383.
Schyns, Zoé O. G.; Shaver, Michael P. (February 2021). “Mechanical Recycling of Packaging Plastics: A Review”. Macromolecular Rapid Communications42 (3): 2000415. doi:10.1002/marc.202000415. PMID33000883.
Fernández-González, J.M.; Grindlay, A.L.; Serrano-Bernardo, F.; Rodríguez-Rojas, M.I.; Zamorano, M. (September 2017). “Economic and environmental review of Waste-to-Energy systems for municipal solid waste management in medium and small municipalities”. Waste Management67: 360–374. Bibcode: 2017WaMan..67..360F. doi:10.1016/j.wasman.2017.05.003. PMID28501263.
Bishop, George; Styles, David; Lens, Piet N.L. (September 2020). “Recycling of European plastic is a pathway for plastic debris in the ocean”. Environment International142: 105893. doi:10.1016/j.envint.2020.105893. PMID32603969.
Wichai-utcha, N.; Chavalparit, O. (1 January 2019). “3Rs Policy and plastic waste management in Thailand” (英語). Journal of Material Cycles and Waste Management21 (1): 10–22. doi:10.1007/s10163-018-0781-y. ISSN1611-8227.
Mohammed, Musa; Shafiq, Nasir; Elmansoury, Ali; Al-Mekhlafi, Al-Baraa Abdulrahman; Rached, Ehab Farouk; Zawawi, Noor Amila; Haruna, Abdulrahman; Rafindadi, Aminu Darda’u et al. (January 2021). “Modeling of 3R (Reduce, Reuse and Recycle) for Sustainable Construction Waste Reduction: A Partial Least Squares Structural Equation Modeling (PLS-SEM)” (英語). Sustainability13 (19): 10660. doi:10.3390/su131910660. ISSN2071-1050.
Kleinhans, Kerstin; Demets, Ruben; Dewulf, Jo; Ragaert, Kim; De Meester, Steven (June 2021). “Non-household end-use plastics: the 'forgotten' plastics for the circular economy”. Current Opinion in Chemical Engineering32: 100680. doi:10.1016/j.coche.2021.100680. ISSN2211-3398.
Brown, Erina; MacDonald, Anna; Allen, Steve; Allen, Deonie (2023-05-01). “The potential for a plastic recycling facility to release microplastic pollution and possible filtration remediation effectiveness” (英語). Journal of Hazardous Materials Advances10: 100309. doi:10.1016/j.hazadv.2023.100309. ISSN2772-4166.