Analysis of information sources in references of the Wikipedia article "Pasport" in Malay language version.
passport, pass´pōrt, n. orig. permission to pass out of port or through the gates; a written warrant granting permission to travel.
|journal= (bantuan)ICAO’s work on machine readable travel documents began in 1968 with the establishment, by the Air Transport Committee of the Council, of a Panel on Passport Cards. This Panel was charged with developing recommendations for a standardized passport book or card that would be machine readable, in the interest of accelerating the clearance of passengers through passport controls. ... In 1998, the New Technologies Working Group of the TAG/MRTD began work to establish the most effective biometric identification system and associated means of data storage for use in MRTD applications, particularly in relation to document issuance and immigration considerations. The bulk of the work had been completed by the time the events of 11 September 2001 caused States to attach greater importance to the security of a travel document and the identification of its holder. The work was quickly finalized and endorsed by the TAG/MRTD and the Air Transport Committee. ... The Seventh Edition of Doc 9303 represents a restructuring of the ICAO specifications for Machine Readable Travel Documents. Without incorporating substantial modifications to the specifications, in this new edition Doc 9303 has been reformatted into a set of specifications for Size 1 Machine Readable Official Travel Documents (TD1), Size 2 Machine Readable Official Travel Documents (TD2), and Size 3 Machine Readable Travel Documents (TD3) ...Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)The Seventh Edition of Doc 9303 represents a restructuring of the ICAO specifications for Machine Readable Travel Documents. Without incorporating substantial modifications to the specifications, in this new edition Doc 9303 has been reformatted into a set of specifications for Size 1 Machine Readable Official Travel Documents (TD1), Size 2 Machine Readable Official Travel Documents (TD2), and Size 3 Machine Readable Travel Documents (TD3), as well as visas. This set of specifications consists of various separate documents in which general (applicable to all MRTDs) as well as MRTD form factor specific specifications are grouped ... Where the substrate used for the biographical data page (or inserted label) of a passport book or MRTD card is formed entirely of plastic or a variation of plastic, it is not usually possible to incorporate many of the security components described in 5.1.1 through 5.1.3 ... A.5.2.5 Special security measures for use with cards and biographical data pages made of plastic' Where a travel document is constructed entirely of plastic, optically variable security features shall be employed which give a changing appearance with angle of viewing. Such devices may take the form of latent images, lenticular features, colour-shifting ink, or diffractive optically variable image features.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)Part 3 defines specifications that are common to TD1, TD2 and TD3 size machine readable travel documents (MRTDs) including those necessary for global interoperability using visual inspection and machine readable (optical character recognition) means. Detailed specifications applicable to each form factor appear in Doc 9303, Parts 4 through 7.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)The nominal dimensions shall be those specified in ISO/IEC 7810 for the ID-1 type card: 53.98 mm x 85.6 mm (2.13 in x 3.37 in) ... The edges of the document after final preparation shall be within the area circumscribed by the concentric rectangles as illustrated in Figure 1. Inner rectangle: 53.25 mm x 84.85 mm (2.10 in x 3.34 in), Outer rectangle: 54.75 mm x 86.35 mm (2.16 in x 3.40 in). In no event shall the dimensions of the finished TD1 document exceed the dimensions of the outer rectangle, including any final preparation (e.g. laminate edges) ... Note k: The first character shall be A, C or I. Historically these three characters were chosen for their ease of recognition in the OCR-B character set. The second character shall be at the discretion of the issuing State or organization except that V shall not be used, and C shall not be used after A except in the Crew Member Certificate.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)|deadurl= ignored (bantuan)|journal= (bantuan)|lastauthoramp= ignored (bantuan)|journal= (bantuan)A passport card serves the same purpose as a passport book. It attests to your United States citizenship and your identity. The passport card is a fully valid passport. However, it is similar in size to a credit card ... Production of the passport card began on July 14, 2008. Millions of cards have already been issued since that date.Cite has empty unknown parameter:
|dead-url= (bantuan)|journal= (bantuan)|deadurl= ignored (bantuan)|lastauthoramp= ignored (bantuan)|deadurl= ignored (bantuan)|journal= (bantuan)|journal= (bantuan)ICAO’s work on machine readable travel documents began in 1968 with the establishment, by the Air Transport Committee of the Council, of a Panel on Passport Cards. This Panel was charged with developing recommendations for a standardized passport book or card that would be machine readable, in the interest of accelerating the clearance of passengers through passport controls. ... In 1998, the New Technologies Working Group of the TAG/MRTD began work to establish the most effective biometric identification system and associated means of data storage for use in MRTD applications, particularly in relation to document issuance and immigration considerations. The bulk of the work had been completed by the time the events of 11 September 2001 caused States to attach greater importance to the security of a travel document and the identification of its holder. The work was quickly finalized and endorsed by the TAG/MRTD and the Air Transport Committee. ... The Seventh Edition of Doc 9303 represents a restructuring of the ICAO specifications for Machine Readable Travel Documents. Without incorporating substantial modifications to the specifications, in this new edition Doc 9303 has been reformatted into a set of specifications for Size 1 Machine Readable Official Travel Documents (TD1), Size 2 Machine Readable Official Travel Documents (TD2), and Size 3 Machine Readable Travel Documents (TD3) ...Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)The Seventh Edition of Doc 9303 represents a restructuring of the ICAO specifications for Machine Readable Travel Documents. Without incorporating substantial modifications to the specifications, in this new edition Doc 9303 has been reformatted into a set of specifications for Size 1 Machine Readable Official Travel Documents (TD1), Size 2 Machine Readable Official Travel Documents (TD2), and Size 3 Machine Readable Travel Documents (TD3), as well as visas. This set of specifications consists of various separate documents in which general (applicable to all MRTDs) as well as MRTD form factor specific specifications are grouped ... Where the substrate used for the biographical data page (or inserted label) of a passport book or MRTD card is formed entirely of plastic or a variation of plastic, it is not usually possible to incorporate many of the security components described in 5.1.1 through 5.1.3 ... A.5.2.5 Special security measures for use with cards and biographical data pages made of plastic' Where a travel document is constructed entirely of plastic, optically variable security features shall be employed which give a changing appearance with angle of viewing. Such devices may take the form of latent images, lenticular features, colour-shifting ink, or diffractive optically variable image features.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)Part 3 defines specifications that are common to TD1, TD2 and TD3 size machine readable travel documents (MRTDs) including those necessary for global interoperability using visual inspection and machine readable (optical character recognition) means. Detailed specifications applicable to each form factor appear in Doc 9303, Parts 4 through 7.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)The nominal dimensions shall be those specified in ISO/IEC 7810 for the ID-1 type card: 53.98 mm x 85.6 mm (2.13 in x 3.37 in) ... The edges of the document after final preparation shall be within the area circumscribed by the concentric rectangles as illustrated in Figure 1. Inner rectangle: 53.25 mm x 84.85 mm (2.10 in x 3.34 in), Outer rectangle: 54.75 mm x 86.35 mm (2.16 in x 3.40 in). In no event shall the dimensions of the finished TD1 document exceed the dimensions of the outer rectangle, including any final preparation (e.g. laminate edges) ... Note k: The first character shall be A, C or I. Historically these three characters were chosen for their ease of recognition in the OCR-B character set. The second character shall be at the discretion of the issuing State or organization except that V shall not be used, and C shall not be used after A except in the Crew Member Certificate.Cite has empty unknown parameters:
|registration=, |subscription=, dan |dead-url= (bantuan)CS1 maint: location (link)A passport card serves the same purpose as a passport book. It attests to your United States citizenship and your identity. The passport card is a fully valid passport. However, it is similar in size to a credit card ... Production of the passport card began on July 14, 2008. Millions of cards have already been issued since that date.Cite has empty unknown parameter:
|dead-url= (bantuan)|deadurl= ignored (bantuan)|journal= (bantuan)|deadurl= ignored (bantuan)