"Standards of Performance for New Sources", 40 CFR--Protection of the Environment, Chapter I, Part 60, Section 60.2, 1990 New Source Performance Standards
"National Primary and Secondary Ambient Air Quality Standards", 40 CFR--Protection of the Environment, Chapter I, Part 50, Section 50.3, 1998 National Ambient Air Standards
aqmd.gov
"Rule 102, Definition of Terms (Standard Conditions)", Amended December 2004, South Coast Air Quality Management District, Los Angeles, California, USA SCAQMD Rule 102Archiválva2008. december 19-i dátummal a Wayback Machine-ben
"Glossary", 2002, Compressed Air and Gas Institute, Cleveland, OH, USA GlossaryArchiválva2007. október 28-i dátummal a Wayback Machine-ben
doe.gov
tonto.eia.doe.gov
"Natural Gas Annual 2004", DOE/EIA-0131(04), December 2005, U.S. Department of Energy, Energy Information Administration, Washington, D.C., USA Natural Gas Annual 2004Archiválva2009. április 27-i dátummal a Wayback Machine-ben
eea.eu.int
reports.eea.eu.int
"Extraction, First Treatment and Loading of Liquid & Gaseous Fossil Fuels", Emission Inventory Guidebook B521, Activities 050201 - 050303, September 1999, European Environmental Agency, Copenhagen, Denmark Emission Inventory Guidebook[halott link]
exteriorballistics.com
Sierra Bullets L.P.. Chapter 3 – Effects of Altitude and Atmospheric Conditions, Rifle and Handgun Reloading Manual, 5th Edition [archivált változat]. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2006. március 9.]"Effects of Altitude and Atmospheric Conditions", Exterior Ballistics Section, Sierra's "Rifle and Handgun Reloading Manual, 5th Edition", Sedalia, MO, USA Exterior BallisticsArchiválva2006. március 9-i dátummal a Wayback Machine-ben
Gassco: Concepts – Standard cubic meter (scm). [2007. október 18-i dátummal az eredetiből archiválva]. (Hozzáférés: 2008. július 25.) „Scm: The usual abbreviation for standard cubic metre – a cubic metre of gas under a standard condition, defined as an atmospheric pressure of 1.01325 bar and a temperature of 15°C. This unit provides a measure for gas volume.”
gpoaccess.gov
ecfr.gpoaccess.gov
"Storage and Handling of Liquefied Petroleum Gases" and "Storage and Handling of Anhydrous Ammonia", 29 CFR--Labor, Chapter XVII--Occupational Safety and Health Administration, Part 1910, Sect. 1910.110 and 1910.111, 1993 Storage/Handling of LPGArchiválva2006. július 19-i dátummal a Wayback Machine-ben
greenheck.com
ANSI/AMCA Standard 210, "Laboratory Methods Of Testing Fans for Aerodynamic Performance Rating", as implied here: http://www.greenheck.com/pdf/centrifugal/Plug.pdf when accessed on October 17, 2007
"Natural gas – Standard reference conditions", ISO 13443, International Organization for Standardization, Geneva, Switzerland ISO Standards CatalogueArchiválva2011. október 12-i dátummal a Wayback Machine-ben
"Air Intake Filters", ISO 5011:2002, International Organization for Standardization, Geneva, Switzerland ISOArchiválva2008. augusztus 8-i dátummal a Wayback Machine-ben
"Gas turbines – Procurement – Part 2: Standard reference conditions and ratings", ISO 3977-2:1997 and "Gas turbines - Acceptance tests", ISO 2314:1989, Edition 2, International Organization for Standardization, Geneva, Switzerland ISOArchiválva2008. augusztus 8-i dátummal a Wayback Machine-ben
iupac.org
A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book [archivált változat], 2nd, Blackwell Science (1997). ISBN 0865426848. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2016. május 24.] „Standard conditions for gases: Temperature, 273.15 K [...] and pressure of 105 pascals. IUPAC recommends that the former use of the pressure of 1 atm as standard pressure (equivalent to 1.01325 × 105 Pa) should be discontinued.” azaz: nem célszerű a továbbiakban alkalmazni
A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book [archivált változat], 2nd, Blackwell Science (1997). ISBN 0865426848. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2009. március 26.] „Standard pressure: Chosen value of pressure denoted by po or p°. 1982-ben az IUPAC javasolta az áttérést a 105 Pa értékre, az előzőleg használt 101 325 Pa (= 1 atm) értékről.”
justice.gc.ca
laws.justice.gc.ca
"Electricity and Gas Inspection Act", SOR/86-131 (defines a set of standard conditions for Imperial units and a different set for metric units) Canadian LawsArchiválva2005. január 3-i dátummal a Wayback Machine-ben
nist.gov
physics.nist.gov
Molar volume of ideal gas. physics.nist.gov, 2011. (Hozzáférés: 2011. június 10.) Ideális gáz gázállandója 0 °C-on és 101 325 Pa nyomáson
Molar volume of ideal gas. physics.nist.gov, 2011. (Hozzáférés: 2011. június 10.) Ideális gáz gázállandója 0 °C-on és 100 000 Pa nyomáson
CODATA Value: molar volume of silicon. physics.nist.gov, 2011. (Hozzáférés: 2011. június 10.) A szilicium a kilogramm új definíciója miatt került bele a természeti állandók közé
"Design and Uncertainty for a PVTt Gas Flow Standard", Journal of Research of the National Institute of Standards and Technology, Vol.108, Number 1, 2003 NIST JournalArchiválva2006. április 14-i dátummal a Wayback Machine-ben
nord-stream.com
Nord Stream: Status of the Nord Stream pipeline route in the Baltic Sea, 2007. October. [2008. február 16-i dátummal az eredetiből archiválva]. (Hozzáférés: 2008. július 25.) „bcm: Billion Cubic Meter (standard cubic metre – a cubic metre of gas under a standard condition, defined as an atmospheric pressure of 1 atm and a temperature of 15 °C.)” Itt a billion azt jelenti: milliárd
opec.org
"Annual Statistical Bulletin", 2004, Editor-in-chief: Dr. Omar Ibrahim, Organization of the Petroleum Exporting Countries, Vienna, Austria OPEC Statistical BulletinArchiválva2008. december 19-i dátummal a Wayback Machine-ben
secinfo.com
Metrogas: Natural gas purchase and sale agreement, 2004. June. (Hozzáférés: 2008. július 25.) „Natural gas at standard condition shall mean the quantity of natural gas, which at a temperature of fifteen (15) Celsius degrees and a pressure of 101.325 kilopascals occupies the volume of one (1) cubic meter.”
A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book [archivált változat], 2nd, Blackwell Science (1997). ISBN 0865426848. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2016. május 24.] „Standard conditions for gases: Temperature, 273.15 K [...] and pressure of 105 pascals. IUPAC recommends that the former use of the pressure of 1 atm as standard pressure (equivalent to 1.01325 × 105 Pa) should be discontinued.” azaz: nem célszerű a továbbiakban alkalmazni
A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book [archivált változat], 2nd, Blackwell Science (1997). ISBN 0865426848. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2009. március 26.] „Standard pressure: Chosen value of pressure denoted by po or p°. 1982-ben az IUPAC javasolta az áttérést a 105 Pa értékre, az előzőleg használt 101 325 Pa (= 1 atm) értékről.”
Gassco: Concepts – Standard cubic meter (scm). [2007. október 18-i dátummal az eredetiből archiválva]. (Hozzáférés: 2008. július 25.) „Scm: The usual abbreviation for standard cubic metre – a cubic metre of gas under a standard condition, defined as an atmospheric pressure of 1.01325 bar and a temperature of 15°C. This unit provides a measure for gas volume.”
Nord Stream: Status of the Nord Stream pipeline route in the Baltic Sea, 2007. October. [2008. február 16-i dátummal az eredetiből archiválva]. (Hozzáférés: 2008. július 25.) „bcm: Billion Cubic Meter (standard cubic metre – a cubic metre of gas under a standard condition, defined as an atmospheric pressure of 1 atm and a temperature of 15 °C.)” Itt a billion azt jelenti: milliárd
"Natural gas – Standard reference conditions", ISO 13443, International Organization for Standardization, Geneva, Switzerland ISO Standards CatalogueArchiválva2011. október 12-i dátummal a Wayback Machine-ben
"Extraction, First Treatment and Loading of Liquid & Gaseous Fossil Fuels", Emission Inventory Guidebook B521, Activities 050201 - 050303, September 1999, European Environmental Agency, Copenhagen, Denmark Emission Inventory Guidebook[halott link]
"Electricity and Gas Inspection Act", SOR/86-131 (defines a set of standard conditions for Imperial units and a different set for metric units) Canadian LawsArchiválva2005. január 3-i dátummal a Wayback Machine-ben
"Design and Uncertainty for a PVTt Gas Flow Standard", Journal of Research of the National Institute of Standards and Technology, Vol.108, Number 1, 2003 NIST JournalArchiválva2006. április 14-i dátummal a Wayback Machine-ben
"Glossary", 2002, Compressed Air and Gas Institute, Cleveland, OH, USA GlossaryArchiválva2007. október 28-i dátummal a Wayback Machine-ben
"Air Intake Filters", ISO 5011:2002, International Organization for Standardization, Geneva, Switzerland ISOArchiválva2008. augusztus 8-i dátummal a Wayback Machine-ben
"Storage and Handling of Liquefied Petroleum Gases" and "Storage and Handling of Anhydrous Ammonia", 29 CFR--Labor, Chapter XVII--Occupational Safety and Health Administration, Part 1910, Sect. 1910.110 and 1910.111, 1993 Storage/Handling of LPGArchiválva2006. július 19-i dátummal a Wayback Machine-ben
"Rule 102, Definition of Terms (Standard Conditions)", Amended December 2004, South Coast Air Quality Management District, Los Angeles, California, USA SCAQMD Rule 102Archiválva2008. december 19-i dátummal a Wayback Machine-ben
"Annual Statistical Bulletin", 2004, Editor-in-chief: Dr. Omar Ibrahim, Organization of the Petroleum Exporting Countries, Vienna, Austria OPEC Statistical BulletinArchiválva2008. december 19-i dátummal a Wayback Machine-ben
"Natural Gas Annual 2004", DOE/EIA-0131(04), December 2005, U.S. Department of Energy, Energy Information Administration, Washington, D.C., USA Natural Gas Annual 2004Archiválva2009. április 27-i dátummal a Wayback Machine-ben
Sierra Bullets L.P.. Chapter 3 – Effects of Altitude and Atmospheric Conditions, Rifle and Handgun Reloading Manual, 5th Edition [archivált változat]. Hozzáférés ideje: 2011. június 9. [archiválás ideje: 2006. március 9.]"Effects of Altitude and Atmospheric Conditions", Exterior Ballistics Section, Sierra's "Rifle and Handgun Reloading Manual, 5th Edition", Sedalia, MO, USA Exterior BallisticsArchiválva2006. március 9-i dátummal a Wayback Machine-ben
"Gas turbines – Procurement – Part 2: Standard reference conditions and ratings", ISO 3977-2:1997 and "Gas turbines - Acceptance tests", ISO 2314:1989, Edition 2, International Organization for Standardization, Geneva, Switzerland ISOArchiválva2008. augusztus 8-i dátummal a Wayback Machine-ben