Analysis of information sources in references of the Wikipedia article "List of TCP and UDP port numbers" in English language version.
... Flash Media Server listens for RTMP/E requests on port 1935/TCP. ... Flash Media Server listens for RTMFP requests on port 1935/UDP. ...
... The ColdFusion server configuration is built on top of Tomcat, also called the built-in web server. ... By default in the server configuration, the built-in web server listens on port 8500. ...
By default, Elastic Beanstalk configures the proxy to forward requests to your application on port 5000.
... DynamoDB uses port 8000 by default. ...
... The port the server will listen on. The default port is 1716.
Start the Network server by executing the startNetworkServer.bat (Windows) or startNetworkServer (UNIX) script. This will start the Network Server up on port 1527 ...
... If you didn't start Solr after installing it, you can start it by running bin/solr from the Solr directory. ... This will start Solr in the background, listening on port 8983. ...... The ColdFusion server configuration is built on top of Tomcat, also called the built-in web server. ... By default in the server configuration, the built-in web server listens on port 8500. ...
... IMAP over SSL currently uses port 993, but an earlier convention uses port 585. ...
... On the firewall, verify that port 3101 is open for outbound initiated, bi-directional Transmission Control Protocol (TCP) traffic. ...
... Freegate is a proxy tool ... If you want to use another application with Freegate ... you will have to configure them to use Freegate as a proxy server. ... the port is 8580. ...
... Ultra Fractal enables you to distribute calculations over multiple computers connected with a network. ... Ultra Fractal uses the TCP/IP protocol for network calculations, ...
... To be able to connect to a remote computer, Ultra Fractal must be running in server mode ... By default, the server listens on port 8691 for connections ...
... A hacker has found a backdoor to wireless combination router/DSL modems ... The attack, confirmed to work on several Linksys and Netgear DSL modems ... the router responded to messages over an unusual TCP port number: 32764. ... the backdoor might affect wireless routers with DSL modems from SerComm, ...
... By default, JIRA applications use TCP listening port 8080 and hence, JIRA applications are typically available at http://<yourserver>:8080. ...... If you see this error: ... This means you are running other software on Confluence's default port of 8090. ...
... The FRITZ!Box supports the TR-069 protocol ... If necessary, the service provider's Auto Configuration Server (ACS) contacts the FRITZ!Box over TCP port 8089 using a URI (Uniform Resource Identifier) that was previously negotiated. ...
... On the firewall, verify that port 3101 is open for outbound initiated, bi-directional Transmission Control Protocol (TCP) traffic. ...
...To run our code, type the following command in the terminal:
sails liftYour app will be running on
...localhost:1337. Let's test it. ...
BO2K runs over any User Datagram Protocol (UDP) port but will default to using port 31337.
... By default, ThinLinc's web-based administration interface is available on TCP port 1010. ...
... default TCP port 953 ... allow rndc commands ...Q: Are HSRP messages TCP or UDP? A: UDP, since HSRP runs on UDP port 1985.[self-published source]
... Unite is both a Web browser and a Web server. With the included JavaScript applets, ... To make this happen, your PC and its Internet connection have to have port 8840 open. ...
... you can now access CoralCDN through ports 80, 8080, and 8090. ...
... By default, the runserver command starts the development server on the internal IP at port 8000. ...... When using Let's Encrypt, ensure that the outward-facing address is accessible on port443. The registry defaults to listening on port5000. ...
... This protocol assumes a reliable data stream; TCP is assumed. Gopher servers should listen on port 70 (port 70 is assigned to Internet Gopher by IANA). ...
... Finger is based on the Transmission Control Protocol, using TCP port 79 decimal ...
... HTTP/2 uses the same "http" and "https" URI schemes used by HTTP/1.1. HTTP/2 shares the same default port numbers: 80 for "http" URIs and 443 for "https" URIs. ...
... When contacting a Kerberos server (KDC) ... the client shall send a UDP datagram containing only an encoding of the request to port 88 (decimal) at the KDC's IP address ...
... Kerberos servers (KDCs) supporting IP transports MUST accept TCP ... UDP requests and SHOULD listen for them on port 88 (decimal) ...
... A TSAP server begins by LISTENing on TCP port 102. ...
... TCP port 102 is reserved for hosts which implement this standard. ...
... Initially, the server host starts the Ph service by listening on TCP port 105. ...
... the specific service of User Telnet may be accessed (on hosts that choose to provide it) by opening a connection to port 107 (153 octal). ...
... This protocol assumes a reliable data stream such as provided by TCP or any similar protocol. When TCP is used, the POP2 server listens on port 109 ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... The Identification Protocol (a.k.a., "ident", a.k.a., "the Ident Protocol") ... listens for TCP connections on TCP port 113 (decimal). ...
... The Authentication Server Protocol provides a means to determine the identity of a user of a particular TCP connection. ... A server listens for TCP connections on TCP port 113 (decimal). ...
... SFTP is used by opening a TCP connection to the remote hosts' SFTP port (115 decimal). ...
... NNTP specifies a protocol for the distribution, inquiry, retrieval, and posting of news articles ... When used via Internet TCP, the contact port assigned for this service is 119. ...
... Network News Transfer Protocol (NNTP) ... is used for the distribution, inquiry, retrieval, and posting of Netnews articles using a reliable stream-based mechanism. ... The official TCP port for the NNTP service is 119. ...
... The Internet Message Access Protocol ... allows a client to access and manipulate electronic mail messages on a server. ... The IMAP4rev1 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev1 server listens on port 143. ...
... The BFTP program ... can be executed as a remotely-accessible service that can be reached via a Telnet connection to the BFTP well-known port (152). ...
... This memo defines a simple application-layer protocol by which management information for a gateway may be inspected or altered by logically remote users. ... An authentication protocol entity responds to protocol messages received at UDP port 153 on the host with which it is associated. ...
... Pcmail is a distributed mail system providing mail service to an arbitrary number of users ... The TCP contact port for DMSP has been designated 158. ...
... BGP listens on TCP port 179. ...
... Although system port assignments exist for IRC traffic that is plain text (TCP/UDP port 194) or TLS/SSL encrypted (TCP/UDP port 994), it is common practice amongst IRC networks not to use them for reasons of convenience and general availability on systems where no root access is granted or desired. ...
When using the TCP to provide the transport-backing for the SMUX protocol, the SNMP agent listens on TCP port 199.
In brief, this memo now recommends that:... Connections to Mail Submission Servers... be made using 'Implicit TLS' [on port 465]... in preference to connecting to the 'cleartext' port [587] and negotiating TLS using the STARTTLS command....
Description: DNS query-response protocol run over DTLS or QUIC
... A reserved port number dedicated for MADCAP is used on the server (port number 2535, as assigned by IANA). Any port number may be used on client machines. ...
... All messages are UDP datagrams. ...
... By default, the STUN NAT Behavior Discovery usage runs on the same ports as STUN: 3478 over UDP and TCP, and 5349 for TCP over TLS. ...
... If CMC services are available using TCP/IP, the dNSName or iPAddress name forms MUST be used. Since the GeneralName data structure does not permit the inclusion of a port number, in the absence of other external configuration information, the value of 5318 should be used. (The port registration is in Section 3.2.) ...
... Saratoga is a rate-based UDP file transfer protocol capable of transferring large files. Saratoga has been in operational use since 2004 to move mission imaging data from the Disaster Monitoring Constellation (DMC) remote-sensing satellites to ground stations. ...
... When CMC messages are sent over a TCP-based connection ... There is no specific port that is to be used when doing TCP-based transport. Only the Private Ports 49152-65535 may be used in this manner (without registration). The ports in the range of 1-49151 [sic?] SHOULD NOT be used. ...
... Festival waits for clients on a known port (the value of server_port, default is 1314). ...... This screen allows the Bridge Crew to connect to the Artemis Simulator. ... The network must also be configured to forward port 2010 to the server machine's local address. ...
... Theps -efandnetstat -acommands are bound to TCP ports 11 and 15, respectively. ...
... Freegate is a proxy tool ... If you want to use another application with Freegate ... you will have to configure them to use Freegate as a proxy server. ... the port is 8580. ...
... 981 /tcp ... remote administration from external using HTTPS ...
When Gemini is served over TCP/IP, servers should listen on port 1965 (the first crewed Gemini mission, Gemini 3, flew in March '65). This is an unprivileged port, so it's very easy to run a server as a "nobody" user, even if e.g. the server is written in Go and so can't drop privileges in the traditional fashion
... Connecting to the tracker server for automatic peer discovery: TCP and UDP, port 3000 ...
... This is the port that Ghost is listening on. By default 2368 is used ...
You may need to Port Forward port 9911 on your router to the wallet PC.
{{cite web}}: CS1 maint: url-status (link)The TCP/IP port of the KGS server. The default is 2379 ...
Port 32749/TCP open or forwarded required for Inbound Connections
{{cite web}}: CS1 maint: url-status (link){{cite web}}: CS1 maint: multiple names: authors list (link)... The z/OS client attempts to use reserved port 1023 and if that port is not available, the z/OS client will subtract one from 1023 until a reserve [sic?] port is available. ... When specifying secure(udp) or proto(udp), the z/OS client uses the privileged UDP ports to communicate with the NFS servers. When specifying proto(tcp) the z/OS client uses the privileged TCP ports to communicate the MOUNT RPC or UNMOUNT RPC with the NFS server. However, the z/OS client uses the ephemeral TCP ports to communicate NFS RPC with the NFS server. ...
... This protocol assumes a reliable data stream; TCP is assumed. Gopher servers should listen on port 70 (port 70 is assigned to Internet Gopher by IANA). ...
... Finger is based on the Transmission Control Protocol, using TCP port 79 decimal ...
... HTTP/2 uses the same "http" and "https" URI schemes used by HTTP/1.1. HTTP/2 shares the same default port numbers: 80 for "http" URIs and 443 for "https" URIs. ...
... When contacting a Kerberos server (KDC) ... the client shall send a UDP datagram containing only an encoding of the request to port 88 (decimal) at the KDC's IP address ...
... Kerberos servers (KDCs) supporting IP transports MUST accept TCP ... UDP requests and SHOULD listen for them on port 88 (decimal) ...
... A TSAP server begins by LISTENing on TCP port 102. ...
... TCP port 102 is reserved for hosts which implement this standard. ...
... Initially, the server host starts the Ph service by listening on TCP port 105. ...
... the specific service of User Telnet may be accessed (on hosts that choose to provide it) by opening a connection to port 107 (153 octal). ...
... This protocol assumes a reliable data stream such as provided by TCP or any similar protocol. When TCP is used, the POP2 server listens on port 109 ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... The Identification Protocol (a.k.a., "ident", a.k.a., "the Ident Protocol") ... listens for TCP connections on TCP port 113 (decimal). ...
... The Authentication Server Protocol provides a means to determine the identity of a user of a particular TCP connection. ... A server listens for TCP connections on TCP port 113 (decimal). ...
... SFTP is used by opening a TCP connection to the remote hosts' SFTP port (115 decimal). ...
... NNTP specifies a protocol for the distribution, inquiry, retrieval, and posting of news articles ... When used via Internet TCP, the contact port assigned for this service is 119. ...
... Network News Transfer Protocol (NNTP) ... is used for the distribution, inquiry, retrieval, and posting of Netnews articles using a reliable stream-based mechanism. ... The official TCP port for the NNTP service is 119. ...
... The Internet Message Access Protocol ... allows a client to access and manipulate electronic mail messages on a server. ... The IMAP4rev1 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev1 server listens on port 143. ...
... The BFTP program ... can be executed as a remotely-accessible service that can be reached via a Telnet connection to the BFTP well-known port (152). ...
... This memo defines a simple application-layer protocol by which management information for a gateway may be inspected or altered by logically remote users. ... An authentication protocol entity responds to protocol messages received at UDP port 153 on the host with which it is associated. ...
... Pcmail is a distributed mail system providing mail service to an arbitrary number of users ... The TCP contact port for DMSP has been designated 158. ...
... BGP listens on TCP port 179. ...
... Although system port assignments exist for IRC traffic that is plain text (TCP/UDP port 194) or TLS/SSL encrypted (TCP/UDP port 994), it is common practice amongst IRC networks not to use them for reasons of convenience and general availability on systems where no root access is granted or desired. ...
When using the TCP to provide the transport-backing for the SMUX protocol, the SNMP agent listens on TCP port 199.
In brief, this memo now recommends that:... Connections to Mail Submission Servers... be made using 'Implicit TLS' [on port 465]... in preference to connecting to the 'cleartext' port [587] and negotiating TLS using the STARTTLS command....
Description: DNS query-response protocol run over DTLS or QUIC
... A reserved port number dedicated for MADCAP is used on the server (port number 2535, as assigned by IANA). Any port number may be used on client machines. ...
... All messages are UDP datagrams. ...
... By default, the STUN NAT Behavior Discovery usage runs on the same ports as STUN: 3478 over UDP and TCP, and 5349 for TCP over TLS. ...
... If CMC services are available using TCP/IP, the dNSName or iPAddress name forms MUST be used. Since the GeneralName data structure does not permit the inclusion of a port number, in the absence of other external configuration information, the value of 5318 should be used. (The port registration is in Section 3.2.) ...
... IANA has assigned UDP port 5402 for MFTP. Certain MFTP messages must be sent to this port because it will be the only port number known both to the sender (Server) and the receivers (Clients). ...
... Saratoga is a file transfer and content delivery protocol ... IANA has allocated port 7542 (tcp/udp) for use by Saratoga. ...
... When CMC messages are sent over a TCP-based connection ... There is no specific port that is to be used when doing TCP-based transport. Only the Private Ports 49152-65535 may be used in this manner (without registration). The ports in the range of 1-49151 [sic?] SHOULD NOT be used. ...
... IANA has assigned UDP port 5402 for MFTP. Certain MFTP messages must be sent to this port because it will be the only port number known both to the sender (Server) and the receivers (Clients). ...
... The IPython notebook web-application is based on a server-client structure. ... By default, a notebook server runs on http://127.0.0.1:8888/ and is accessible only from localhost. ... {{cite book}}: |website= ignored (help)... allow TCP/IP connections on port 1626 & 1627 (1627 only needed for sending sketches.)
... Jenkins instances listen on UDP port 33848. ...
{{cite encyclopedia}}: CS1 maint: numeric names: authors list (link)[user-generated source]... Jenkins listens on UDP port 33848. ...[user-generated source]
... By default, the notebook server starts on port 8888. If port 8888 is unavailable or in use, the notebook server searches the next available port. ...
... Unite automatically hooks into your router using uPnP to dynamically open port 8840, but it can also use a Unite proxy server when you're behind a more restrictive firewall ...
... By default, socklnd uses TCP port 988 to create connections, and this must not be blocked by any firewalls. ...
... The default port for the wake-up transmission is UDP port 9. ...
... 1688 is the default TCP port used by the clients to connect to the KMS host. ...
... By default, a WSUS server that is configured for the default Web site uses port 80 for HTTP and port 443 for HTTPS. By default, the WSUS server uses port 8530 for HTTP and port 8531 for HTTPS if it is using the WSUS custom Web site. ...
... Delivery Optimization listens on port 7680. ...
... IMAP over SSL currently uses port 993, but an earlier convention uses port 585. ...
... TCP port 5000 shall be configured and open inbound through firewalls to the encoder. ...
... The default port for spartan URLs is 300, in reference to Battle of Thermopylae when 300 spartan soldiers stood ground against an invading Persian army. ...
... TCP/IP port 1883 is reserved with IANA for use with MQTT. TCP/IP port 8883 is also registered, for using MQTT over SSL. ...
... TCP ports 8883 and 1883 are registered with IANA for MQTT TLS and non TLS communication respectively. ...
... The port attribute specifies a TPC [sic] port on which the server is listening for new connections. Usually the default port 6136 should be specified. ...... port is the OpenERP server port which is by default 8070 for NET-RPC or 8069 for XML(S)-RPC. The web server itself listens by default on port 8080 ...
... enter the hostname or IP address (and optionally a port if the server is not using the default OpenRCT2 port, 11753). ... configure your router to forward TCP connections on your chosen port (default is 11753) ...
Tomcat, in a default installation, is configured to listen on port 8080 rather than the conventional web server port number 80. ...
... Upon startup, the server runs on port 2424 for the binary protocol and 2480 for the http one. If a port is busy the next free one will be used. The default range is 2424–2430 (binary) and 2480–2490 (http). ...
... CDDB (CD database) is an information database containing artist, disc title, track titles, and other information for digital audio compact discs. ... There are two forms of remote access to CDDB servers, CDDBP and HTTP. All current CDDB servers answer either at IP port 888 or 8880 for CDDBP and port 80 for HTTP access. ...
... Pervasive PSQL Vx Server 11 SP3 communicates via the following ones: 3351 for the transactional interface, 1583 for the relational interface, and 139 for named pipes. ...
... TCP: 32400 (for access to the Plex Media Server) ...
... The Web UI is located at: http://server-name:15672/ ... NB: The port for RabbitMQ versions prior to 3.0 is 55672. ...... This protocol assumes a reliable data stream; TCP is assumed. Gopher servers should listen on port 70 (port 70 is assigned to Internet Gopher by IANA). ...
... Finger is based on the Transmission Control Protocol, using TCP port 79 decimal ...
... HTTP/2 uses the same "http" and "https" URI schemes used by HTTP/1.1. HTTP/2 shares the same default port numbers: 80 for "http" URIs and 443 for "https" URIs. ...
... When contacting a Kerberos server (KDC) ... the client shall send a UDP datagram containing only an encoding of the request to port 88 (decimal) at the KDC's IP address ...
... Kerberos servers (KDCs) supporting IP transports MUST accept TCP ... UDP requests and SHOULD listen for them on port 88 (decimal) ...
... A TSAP server begins by LISTENing on TCP port 102. ...
... TCP port 102 is reserved for hosts which implement this standard. ...
... Initially, the server host starts the Ph service by listening on TCP port 105. ...
... the specific service of User Telnet may be accessed (on hosts that choose to provide it) by opening a connection to port 107 (153 octal). ...
... This protocol assumes a reliable data stream such as provided by TCP or any similar protocol. When TCP is used, the POP2 server listens on port 109 ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... the server host starts the POP3 service by listening on TCP port 110. ...
... The Identification Protocol (a.k.a., "ident", a.k.a., "the Ident Protocol") ... listens for TCP connections on TCP port 113 (decimal). ...
... The Authentication Server Protocol provides a means to determine the identity of a user of a particular TCP connection. ... A server listens for TCP connections on TCP port 113 (decimal). ...
... SFTP is used by opening a TCP connection to the remote hosts' SFTP port (115 decimal). ...
... NNTP specifies a protocol for the distribution, inquiry, retrieval, and posting of news articles ... When used via Internet TCP, the contact port assigned for this service is 119. ...
... Network News Transfer Protocol (NNTP) ... is used for the distribution, inquiry, retrieval, and posting of Netnews articles using a reliable stream-based mechanism. ... The official TCP port for the NNTP service is 119. ...
... The Internet Message Access Protocol ... allows a client to access and manipulate electronic mail messages on a server. ... The IMAP4rev1 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev1 server listens on port 143. ...
... The BFTP program ... can be executed as a remotely-accessible service that can be reached via a Telnet connection to the BFTP well-known port (152). ...
... This memo defines a simple application-layer protocol by which management information for a gateway may be inspected or altered by logically remote users. ... An authentication protocol entity responds to protocol messages received at UDP port 153 on the host with which it is associated. ...
... Pcmail is a distributed mail system providing mail service to an arbitrary number of users ... The TCP contact port for DMSP has been designated 158. ...
... BGP listens on TCP port 179. ...
... Although system port assignments exist for IRC traffic that is plain text (TCP/UDP port 194) or TLS/SSL encrypted (TCP/UDP port 994), it is common practice amongst IRC networks not to use them for reasons of convenience and general availability on systems where no root access is granted or desired. ...
When using the TCP to provide the transport-backing for the SMUX protocol, the SNMP agent listens on TCP port 199.
In brief, this memo now recommends that:... Connections to Mail Submission Servers... be made using 'Implicit TLS' [on port 465]... in preference to connecting to the 'cleartext' port [587] and negotiating TLS using the STARTTLS command....
Description: DNS query-response protocol run over DTLS or QUIC
... A reserved port number dedicated for MADCAP is used on the server (port number 2535, as assigned by IANA). Any port number may be used on client machines. ...
... All messages are UDP datagrams. ...
... By default, the STUN NAT Behavior Discovery usage runs on the same ports as STUN: 3478 over UDP and TCP, and 5349 for TCP over TLS. ...
... If CMC services are available using TCP/IP, the dNSName or iPAddress name forms MUST be used. Since the GeneralName data structure does not permit the inclusion of a port number, in the absence of other external configuration information, the value of 5318 should be used. (The port registration is in Section 3.2.) ...
... When CMC messages are sent over a TCP-based connection ... There is no specific port that is to be used when doing TCP-based transport. Only the Private Ports 49152-65535 may be used in this manner (without registration). The ports in the range of 1-49151 [sic?] SHOULD NOT be used. ...
... pygstc.gstc module ...
... Now you must create an entry for each of the port ranges listed on the previous page. ... 5000 – 5500 UDP (League of Legends Game Client) ...
... When you install UniVerse on your system for the first time, you must add the UniRPC daemon's port to the/etc/servicesfile. Add the following line to the/etc/servicesfile: uvrpc 31438/tcp # uvrpc port ...
... open the following ports; 443, 43594 and 43595 ...
Tomcat, in a default installation, is configured to listen on port 8080 rather than the conventional web server port number 80. ...
The server normally binds to UDP port 31337, but it may be configured to use another port.
... Servers use the ports 28785 (UDP) and 28786 (UDP). ...
... The Web UI is located at: http://server-name:15672/ ... NB: The port for RabbitMQ versions prior to 3.0 is 55672. ...... XBT Tracker listens on port 2710. ...
... An experimental UDP tracker extension is also supported via announce URL udp://...:2710. ...... The following are the spec and example files forweb.conf. ... Location ofsplunkd. ... Defaults to127.0.0.1:8089. ...
... Squid normally listens to port 3128 ...
... The Nessus UI uses port 8834. ... By default, Nessus is installed and managed using HTTPS and SSL, uses port 8834 ...
... In order for the LDM system to send data to a downstream LDM, the firewall rules must allow incoming TCP connections to the port on which the LDM server is listening (the default is 388). ...[self-published source]
... Use of the LDM requires that any host listed in its access control list be allowed a TCP connection to port 388 on the localhost. If the localhost is behind a firewall, the firewall must allow TCP access to port 388. ...[self-published source]
... Ultra Fractal enables you to distribute calculations over multiple computers connected with a network. ... Ultra Fractal uses the TCP/IP protocol for network calculations, ...
... To be able to connect to a remote computer, Ultra Fractal must be running in server mode ... By default, the server listens on port 8691 for connections ...
... Beloved online chat app AOL Instant Messenger died on Friday, USA Today reports. It was 20 years old. ...
... The default VI Web Access HTTP connection port is 8222 and the default HTTPS port is 8333. ...
... The default port for the wake-up transmission is UDP port 9. ...
... The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host. ... When XDMCP is implemented on top of the Internet User Datagram Protocol (UDP), port number 177 is to be used. ...[self-published source]
... In order for the LDM system to send data to a downstream LDM, the firewall rules must allow incoming TCP connections to the port on which the LDM server is listening (the default is 388). ...[self-published source]
... Use of the LDM requires that any host listed in its access control list be allowed a TCP connection to port 388 on the localhost. If the localhost is behind a firewall, the firewall must allow TCP access to port 388. ...[self-published source]
... default TCP port 953 ... allow rndc commands ...... 981 /tcp ... remote administration from external using HTTPS ...
... By default, ThinLinc's web-based administration interface is available on TCP port 1010. ...
... The z/OS client attempts to use reserved port 1023 and if that port is not available, the z/OS client will subtract one from 1023 until a reserve [sic?] port is available. ... When specifying secure(udp) or proto(udp), the z/OS client uses the privileged UDP ports to communicate with the NFS servers. When specifying proto(tcp) the z/OS client uses the privileged TCP ports to communicate the MOUNT RPC or UNMOUNT RPC with the NFS server. However, the z/OS client uses the ephemeral TCP ports to communicate NFS RPC with the NFS server. ...
... Festival waits for clients on a known port (the value of server_port, default is 1314). ...Start the Network server by executing the startNetworkServer.bat (Windows) or startNetworkServer (UNIX) script. This will start the Network Server up on port 1527 ...
... allow TCP/IP connections on port 1626 & 1627 (1627 only needed for sending sketches.)
... Valid communications protocols aretcp(plaintext over TCP/IP) orssl(SSL over TCP/IP).
... 1688 is the default TCP port used by the clients to connect to the KMS host. ...
... The port the server will listen on. The default port is 1716.
... Flash Media Server listens for RTMP/E requests on port 1935/TCP. ... Flash Media Server listens for RTMFP requests on port 1935/UDP. ...
When Gemini is served over TCP/IP, servers should listen on port 1965 (the first crewed Gemini mission, Gemini 3, flew in March '65). This is an unprivileged port, so it's very easy to run a server as a "nobody" user, even if e.g. the server is written in Go and so can't drop privileges in the traditional fashion
Q: Are HSRP messages TCP or UDP? A: UDP, since HSRP runs on UDP port 1985.[self-published source]
... This screen allows the Bridge Crew to connect to the Artemis Simulator. ... The network must also be configured to forward port 2010 to the server machine's local address. ...
... This is the port that Ghost is listening on. By default 2368 is used ...
The TCP/IP port of the KGS server. The default is 2379 ...
... Upon startup, the server runs on port 2424 for the binary protocol and 2480 for the http one. If a port is busy the next free one will be used. The default range is 2424–2430 (binary) and 2480–2490 (http). ...
... XBT Tracker listens on port 2710. ...
... An experimental UDP tracker extension is also supported via announce URL udp://...:2710. ...... Connecting to the tracker server for automatic peer discovery: TCP and UDP, port 3000 ...
... Squid normally listens to port 3128 ...
... When using Let's Encrypt, ensure that the outward-facing address is accessible on port443. The registry defaults to listening on port5000. ...
... TCP port 5000 shall be configured and open inbound through firewalls to the encoder. ...
... Now you must create an entry for each of the port ranges listed on the previous page. ... 5000 – 5500 UDP (League of Legends Game Client) ...
... Beloved online chat app AOL Instant Messenger died on Friday, USA Today reports. It was 20 years old. ...
... The port attribute specifies a TPC [sic] port on which the server is listening for new connections. Usually the default port 6136 should be specified. ...... Delivery Optimization listens on port 7680. ...
... DynamoDB uses port 8000 by default. ...
... By default, the runserver command starts the development server on the internal IP at port 8000. ...... port is the OpenERP server port which is by default 8070 for NET-RPC or 8069 for XML(S)-RPC. The web server itself listens by default on port 8080 ...
... By default, JIRA applications use TCP listening port 8080 and hence, JIRA applications are typically available at http://<yourserver>:8080. ...... The following are the spec and example files forweb.conf. ... Location ofsplunkd. ... Defaults to127.0.0.1:8089. ...
... The FRITZ!Box supports the TR-069 protocol ... If necessary, the service provider's Auto Configuration Server (ACS) contacts the FRITZ!Box over TCP port 8089 using a URI (Uniform Resource Identifier) that was previously negotiated. ...
... you can now access CoralCDN through ports 80, 8080, and 8090. ...
... The default VI Web Access HTTP connection port is 8222 and the default HTTPS port is 8333. ...
... By default, a WSUS server that is configured for the default Web site uses port 80 for HTTP and port 443 for HTTPS. By default, the WSUS server uses port 8530 for HTTP and port 8531 for HTTPS if it is using the WSUS custom Web site. ...
... The Nessus UI uses port 8834. ... By default, Nessus is installed and managed using HTTPS and SSL, uses port 8834 ...
... Unite is both a Web browser and a Web server. With the included JavaScript applets, ... To make this happen, your PC and its Internet connection have to have port 8840 open. ...
... Unite automatically hooks into your router using uPnP to dynamically open port 8840, but it can also use a Unite proxy server when you're behind a more restrictive firewall ...
... CDDB (CD database) is an information database containing artist, disc title, track titles, and other information for digital audio compact discs. ... There are two forms of remote access to CDDB servers, CDDBP and HTTP. All current CDDB servers answer either at IP port 888 or 8880 for CDDBP and port 80 for HTTP access. ...
... TCP/IP port 1883 is reserved with IANA for use with MQTT. TCP/IP port 8883 is also registered, for using MQTT over SSL. ...
... TCP ports 8883 and 1883 are registered with IANA for MQTT TLS and non TLS communication respectively. ...
... The IPython notebook web-application is based on a server-client structure. ... By default, a notebook server runs on http://127.0.0.1:8888/ and is accessible only from localhost. ... {{cite book}}: |website= ignored (help)... By default, the notebook server starts on port 8888. If port 8888 is unavailable or in use, the notebook server searches the next available port. ...
... If you didn't start Solr after installing it, you can start it by running bin/solr from the Solr directory. ... This will start Solr in the background, listening on port 8983. ...... enter the hostname or IP address (and optionally a port if the server is not using the default OpenRCT2 port, 11753). ... configure your router to forward TCP connections on your chosen port (default is 11753) ...
... The Web UI is located at: http://server-name:15672/ ... NB: The port for RabbitMQ versions prior to 3.0 is 55672. ...... Servers use the ports 28785 (UDP) and 28786 (UDP). ...
The server normally binds to UDP port 31337, but it may be configured to use another port.
... TCP: 32400 (for access to the Plex Media Server) ...
... A hacker has found a backdoor to wireless combination router/DSL modems ... The attack, confirmed to work on several Linksys and Netgear DSL modems ... the router responded to messages over an unusual TCP port number: 32764. ... the backdoor might affect wireless routers with DSL modems from SerComm, ...
... Jenkins instances listen on UDP port 33848. ...
{{cite encyclopedia}}: CS1 maint: numeric names: authors list (link)[user-generated source]... Jenkins listens on UDP port 33848. ...[user-generated source]
...To run our code, type the following command in the terminal:
sails liftYour app will be running on
...localhost:1337. Let's test it. ...
Tomcat, in a default installation, is configured to listen on port 8080 rather than the conventional web server port number 80. ...
... The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host. ... When XDMCP is implemented on top of the Internet User Datagram Protocol (UDP), port number 177 is to be used. ...[self-published source]
... A QMTP client connects to a QMTP server, as discussed in section 7, over a reliable stream protocol allowing transmission of 8-bit bytes. ... QMTP may be used on top of TCP. A QMTP-over-TCP server listens for TCP connections on port 209. ...[self-published source]